IC equipment: MiPuT

IC equipment: MiPuT
Katalogové číslo: 6.5330.170

Accessory set for assembling a Dosino for sample pick-up (Metrohm intelligent Pick-up Injection Technique).

  • Dokumenty
  • Součástky

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • Metrosep I Trap 1 - 100/4.0
    6.1014.200
    Metrosep I Trap 1 - 100/4.0


    The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation." Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.


    1 piece(s)

  • 
            
    Eluent bottle cap GL 45
    6.1602.160
    Eluent bottle cap GL 45
    For eluent bottles, with connectors for the adsorber tube and the aspiration tubing.

    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    1 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    1 piece(s)

  • Adapter SGJ 14 for 6.1619.XXX Adsorber tube
    6.1624.000
    Adapter SGJ 14 for 6.1619.XXX Adsorber tube

    Adapter SGJ 14. Part of 6.1619.010 for Dilution Sample Processor.

    1 piece(s)

  • FEP tubing / M6 / 100 cm
    6.1805.120
    FEP tubing / M6 / 100 cm
    With light and kink protection

    1 piece(s)

  • Thread adapter M8 outer / M6 inner
    6.1808.090
    Thread adapter M8 outer / M6 inner
    Outer thread M8, inner thread M6, e.g. for mounting 6.2418.XXX Air tubes in 6.1429.XXX Reaction vessels of stability measuring instruments.

    1 piece(s)

  • 
    FEP aspiration tubing to canister
    6.1819.110
    FEP aspiration tubing to canister

    Aspiration tubing to canister attachment with M6 connector. For the production of eluents.


    1 piece(s)

  • PEEK sample loop 250 µL
    6.1825.290
    PEEK sample loop 250 µL

    Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.

    1 piece(s)

  • PEEK capillary 0.25 mm i.d., 1 m
    6.1831.100
    PEEK capillary 0.25 mm i.d., 1 m

    1 piece(s)

  • PEEK transfer capillary 2 mL, 5 m
    6.1841.000
    PEEK transfer capillary 2 mL, 5 m

    1 piece(s)

  • Holder for Dosino to IC instruments
    6.2057.210
    Holder for Dosino to IC instruments
    Mounting part for Dosinos at the IC instrument housing.

    1 piece(s)

  • Pick-up needle MF
    6.2624.100
    Pick-up needle MF
    Coated steel needle for metalfree pick-up sampling as well as for Eppendorf sample vials.

    1 piece(s)

  • Pressure screw 5x
    6.2744.010
    Pressure screw 5x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    1 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    1 piece(s)

  • Needle/tube holder 1/16 in.
    6.2833.010
    Needle/tube holder 1/16 in.
    For IC Sample Processors. For 1/16 in. tubes

    1 piece(s)

  • 
    Liquid Handling Station, left
    6.2841.120
    Liquid Handling Station, left

    Combined rinsing and dilution station for sample changers with Swing Head. For assembly to the left of the tower.


    1 piece(s)

  • Dosing Unit 2 mL
    6.3032.120
    Dosing Unit 2 mL
    Dosing unit with integrated data chip with 2 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 glass thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • 
    Retaining plate for sample rack 159 x 2 mL + 3 x 300 mL
    6.9920.231
    Retaining plate for sample rack 159 x 2 mL + 3 x 300 mL

    Plate for deflecting the vessel cover on the Professional IC Sample Processor. For 2 mL sample vessels.


    1 piece(s)