根据EN 14104标准采用光度滴定法测定生物柴油酸值
AN-T-247
2026-01
zh
Fast and reliable determination of acid value in fatty acid methyl ester (FAME) with the Optrode following EN 14104
脂肪酸甲酯（如生物柴油）的酸值可通过OMNIS系统配合Optrode电极，采用光度滴定法依据EN 14104标准进行测定。
Biodiesel, also known chemically as Fatty Acid Methyl Ester or FAME, is a fuel that is used just like mineral diesel. Biodiesel quality needs to be monitored for many reasons.
The acid value (or acid number) is a measurable quality parameter linked to a fuel's purity and stability. A high acid value suggests either prolonged storage or poor biodiesel production quality, both of which can lead to corrosion of engine parts. A low acid value indicates pure, stable biodiesel.
In this Application Note, an acid value determination of biodiesel was photometrically titrated with the Optrode. The method was performed according to EN 14104. The standard specifies the titrimetric determination of the acid value in lightly colored fatty acid methyl esters (FAME) in the range of 0.10 mg KOH/g sample to 1.00 mg KOH/g sample
FAME (biodiesel) is a type of fuel produced by transesterification of glycerides present in vegetable or animal fats and oils, as well as in organic waste with monohydric alcohols like methanol or ethanol. In simplified terms, the production process is based on the following reaction:
Oils/Fats + Alcohol → Biodiesel + Glycerine
Compared to petroleum-based diesel, biodiesel produces fewer emissions and is considered sustainable and climate-friendly. It is primarily made from renewable resources, is biodegradable, and has good lubricating properties.
The acid value in biodiesel should be determined as a quality control measure. Low values are associated with good quality biodiesel, while high values indicate poor quality and a higher likelihood of corrosion from the fuel.
This application is demonstrated on 100% biodiesel (made from organic waste, e.g., waste cooking oil).
No sample preparation is required.
The determinations are carried out on an OMNIS Professional Titrator equipped with OMNIS Dosing Modules (Figure 1) as well as an Optrode M2.
An appropriate amount of sample is weighed into the titration beaker, and pre-neutralized 2-propanol as well as phenolphthalein solution are added. The solution is titrated until after the first break point with standardized potassium hydroxide in 2-propanol.
This method offers reliable results that meet the standard's requirements for repeatability and reproducibility within the measurement series, as displayed in Table 1. An exemplary titration curve of acid number in biodiesel is given in Figure 2.
| Sample (n = 6) | Acid value in mg KOH/g sample |
|---|---|
| Mean value | 0.41 |
| SD(abs) | 0.01 |
| SD(rel) in % | 1.8 |
Photometric titration is a fast and reliable test method for determining the acid value of fatty acid methyl ester (FAME). The glass coating of the Optrode is insensitive to chemicals and raw materials (e.g., biodiesel itself), making it ideal for this purpose.
Thanks to the individually adjustable wavelength of the Optrode and the reliable OMNIS Software, acid value determination according to EN 14104 can be achieved even in very low measuring ranges.
分享应用
下载PDF