WSM accessory kit (1T/2P)
6.05001.110
- Feature overview
This accessory kit contains all of the components required for the tubing setup for 1 rinsing pump and 1 aspiration pump on the pump module of the OMNIS Workstation Module (1T/2P). In addition to preassembled tubing with Luer connectors, each of these also includes 2 press clamps and pump tubing. A tool for simplifying attachment of the Luer connectors is also included in the set.
Equip your WSM accessory kit (1T/2P)
Scope of delivery and opt. parts (PDF)
Scope of delivery and opt. parts (PDF)- Included parts
Pharm-A-line pump tubing to the peristaltic pump module
6.01801.020
The pump tubing comes pre-equipped with adapters that permit direct installation in the peristaltic pump of the pump module. The Pharm-A-line pump tubing is used for the transport of both aqueous and nonaqueous solutions and must be operated in connection with the white press clamp in the pump module.
PTFE tubing with Luer 80 cm
6.01805.110
Tubing for the connection between peristaltic pump 2 or 4 in the pump module with the distributor (aspiration) on the Pick&Place module.
PTFE tubing with Luer 2.5 m
6.01805.120
Tubing for the connection between the canister and the peristaltic pump in the pump module.
Luer tool
6.02621.030
This tool simplifies the attachment and disassembly of Luer lock connectors. It can be fitted on the Luer lock connector, where its shape facilitates the attachment of the tubing equipped with Luer connectors.
แสดงเพิ่มเติม