Fully automated determination of the permanganate index in accordance with DIN EN ISO 8467
MATi 13
-
- 786 Swing Head
- 2.786.0040
- Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
- Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
- PCS
- 1
- 800 Dosino
- 2.800.0010
- The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
- <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
- PCS
- 3
- 801 Stirrer
- 2.801.0010
- Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).
- <p>Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).</p>
- PCS
- 1
- 814 USB Sample Processor (1T/2P)
- 2.814.0020
- USB Sample Processor with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with small to medium quantities. In addition to the built-in pumps, up to three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately. The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.
- <p>USB Sample Processor with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with small to medium quantities. In addition to the built-in pumps, up to three dosing devices for Liquid Handling tasks can be connected.<br/> <br/>Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately.<br/> </p><p>The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.</p>
- PCS
- 1
- 907 Titrando
- 2.907.0010
- High-end titrator for potentiometric and volumetric Karl Fischer titration with one measuring interface and Dosino dosing units. up to four dosing device systems of the 800 Dosino type; dynamic (DET), monotonic (MET) and endpoint titration (SET), enzymatic and pH-STAT titrations (STAT), Karl Fischer titration (KFT); Measurement with ion-selective electrodes (MEAS CONC); "iTrode" intelligent electrodes; Dosing functions with monitoring, liquid handling; four MSB connectors for additional stirrers or dosing device systems; USB connector; For use with OMNIS Software, tiamo software, or Touch Control; Complies with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required;
- <p>High-end titrator for potentiometric and volumetric Karl Fischer titration with one measuring interface and Dosino dosing units.<br/> </p><ul><li>up to four dosing device systems of the 800 Dosino type</li><li>dynamic (DET), monotonic (MET) and endpoint titration (SET), enzymatic and pH-STAT titrations (STAT), Karl Fischer titration (KFT)</li><li>Measurement with ion-selective electrodes (MEAS CONC)</li><li>"iTrode" intelligent electrodes</li><li>Dosing functions with monitoring, liquid handling</li><li>four MSB connectors for additional stirrers or dosing device systems</li><li>USB connector</li><li>For use with OMNIS Software, <strong><em>tiamo</em></strong> software, or Touch Control</li><li>Complies with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required</li></ul>
- PCS
- 1
- Pt Titrode
- 6.0431.100
- Combined platinum ring electrode with a pH glass membrane as reference electrode.This maintenance free electrode is well suited for redox titrations when the pH value remains constant, e.g.: iodometry; chromatometry; cerimetry; permanganometry; This electrode is stored in deion. water.
- <p>Combined platinum ring electrode with a pH glass membrane as reference electrode.<br/>This maintenance free electrode is well suited for redox titrations when the pH value remains constant, e.g.:<br/> </p><ul><li>iodometry</li><li>chromatometry</li><li>cerimetry</li><li>permanganometry</li></ul><p><br/>This electrode is stored in deion. water.</p>
- PCS
- 1
- OMNIS Software storage device
- 6.06000.000
- License-based PC program for controlling complex OMNIS analysis systems. Sample-oriented operating procedures with numerous templates; Graphical method editor with numerous templates; Clearly organized and professional sample lists; Management of instruments, work systems, sensors, solutions; Dialog languages: German, English, Chinese;
- <p>License-based PC program for controlling complex OMNIS analysis systems. </p><ul><li>Sample-oriented operating procedures with numerous templates</li><li>Graphical method editor with numerous templates</li><li>Clearly organized and professional sample lists</li><li>Management of instruments, work systems, sensors, solutions</li><li>Dialog languages: German, English, Chinese</li></ul><p> </p><p> </p>
- PCS
- 1
- OMNIS stand-alone license with 2 instrument licenses
- 6.06003.012
- Enables stand-alone operation of the OMNIS Software on a Windows™ computer.Features:The license already includes two OMNIS instrument licenses.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;
- <p>Enables stand-alone operation of the OMNIS Software on a Windows™ computer.</p><p>Features:</p><ul><li>The license already includes two OMNIS instrument licenses.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul>
- PCS
- 1
- Pt1000 temperature sensor (installation length 12.5 cm)
- 6.1110.100
- Pt1000 temperature sensor (class B) made of glass.This PT1000 temperature sensor is also available under the article number 6.1110.110 with an installation length of 17.8 cm.
- <p>Pt1000 temperature sensor (class B) made of glass.</p><p>This PT1000 temperature sensor is also available under the article number 6.1110.110 with an installation length of 17.8 cm.</p>
- PCS
- 1
- Micro titration vessel lid / ECO
- 6.1414.060
- PCS
- 1
- Titration vessel with thermostat jacket / 20-90 mL
- 6.1418.220
- PCS
- 1
- Sample beaker, clear glass, 75 mL, 1 piece
- 6.1432.210
- Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece
- <p>Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece<br/> </p>
- PCS
- 30
- Robotic arm with transfer head for 786 Swing Head, right swinging
- 6.1462.040
- Transfer robotic arm for liquid handling purposes
- Transfer robotic arm for liquid handling purposes
- PCS
- 1
- 3-way stopper with antidiffusion valve
- 6.1543.210
- Stopper with three buret tips for connecting 3 x M6 tubing
- Stopper with three buret tips for connecting 3 x M6 tubing
- PCS
- 1
- FEP tubing / M6 / 60 cm
- 6.1805.060
- With light and kink protection
- With light and kink protection
- PCS
- 3
- FEP tubing / M6 / 120 cm
- 6.1805.130
- With light and kink protection
- With light and kink protection
- PCS
- 2
- Thread adapter M6 outer / M8 inner
- 6.1808.040
- Outer thread M6, inner thread M8.
- Outer thread M6, inner thread M8.
- PCS
- 1
- Aspiration tip M8 with M10 screw nipple
- 6.1821.070
- For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.
- <p>For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.</p>
- PCS
- 1
- Support stand for Sample Processors
- 6.2001.070
- Support stand for Sample Processors, for external titrations and dilutions (IC)
- Support stand for Sample Processors, for external titrations and dilutions (IC)
- PCS
- 1
- Clamping ring
- 6.2013.010
- For support rods with a diameter of 10 mm.
- <p>For support rods with a diameter of 10 mm.</p>
- PCS
- 2
- Foil holder
- 6.2037.040
- Foil holder for 75 mL sample beaker for Karl Fischer for KF Sample Changer
- Foil holder for 75 mL sample beaker for Karl Fischer for KF Sample Changer
- PCS
- 30
- Sample rack, 24 x 75 mL, (PVC)
- 6.2041.340
- Sample rack for 810 Sample Processor, 814 USB Sample Processor, 855 Robotic Titrosampler "Light", suitable for 24 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.Plastic: Polyvinyl chloride (PVC)
- <p>Sample rack for 810 Sample Processor, 814 USB Sample Processor, 855 Robotic Titrosampler "Light", suitable for 24 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
- PCS
- 1
- Bottle holder for Dosinos
- 6.2061.010
- Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
- Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
- PCS
- 1
- Electrode Cable 2 m / F
- 6.2104.030
- For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
- For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
- PCS
- 1
- Electrode cable 1 m, 2xB
- 6.2104.080
- With banana plug 4 mm dia. For connecting electrodes with Metrohm plug-in head G to measuring instrument.
- With banana plug 4 mm dia. For connecting electrodes with Metrohm plug-in head G to measuring instrument.
- PCS
- 1
- Cable USB A – mini-DIN 8-pin
- 6.2151.000
- Controller cable
- Controller cable
- PCS
- 1
- Stopper
- 6.2730.030
- Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.
- <p>Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.</p>
- PCS
- 5
- Screw nipple
- 6.2730.060
- PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment
- PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment
- PCS
- 3
- Al foil
- 6.2820.000
- 1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer
- 1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer
- PCS
- 1
- 807 Dosing Unit 10 mL
- 6.3032.210
- 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
- PCS
- 2
- 807 Dosing Unit 50 mL
- 6.3032.250
- 807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- <p>807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
- PCS
- 1
- Holder for transfer tubing, 25 mL
- 6.9915.078
- The 25 mL transfer tubing can be coiled up neatly and mounted on the guide chain of the Sample Processor with the help of the holder.
- <p>The 25 mL transfer tubing can be coiled up neatly and mounted on the guide chain of the Sample Processor with the help of the holder.</p>
- PCS
- 1
- Transfer tubing 25 mL
- 6.9915.079
- The 25 mL 2x M8 transfer tubing is mounted to the guide chain of the Sample Processor with the help of the 6.9915.078 holder
- <p>The 25 mL 2x M8 transfer tubing is mounted to the guide chain of the Sample Processor with the help of the 6.9915.078 holder</p>
- PCS
- 1
-
- 786 Swing Head
- 2.786.0040
- Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
- Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
- PCS
- 1
- 800 Dosino
- 2.800.0010
- The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
- <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
- PCS
- 3
- 801 Stirrer
- 2.801.0010
- Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).
- <p>Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).</p>
- PCS
- 1
- 814 USB Sample Processor (1T/2P)
- 2.814.0020
- USB Sample Processor with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with small to medium quantities. In addition to the built-in pumps, up to three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately. The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.
- <p>USB Sample Processor with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with small to medium quantities. In addition to the built-in pumps, up to three dosing devices for Liquid Handling tasks can be connected.<br/> <br/>Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately.<br/> </p><p>The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.</p>
- PCS
- 1
- 907 Titrando
- 2.907.0010
- High-end titrator for potentiometric and volumetric Karl Fischer titration with one measuring interface and Dosino dosing units. up to four dosing device systems of the 800 Dosino type; dynamic (DET), monotonic (MET) and endpoint titration (SET), enzymatic and pH-STAT titrations (STAT), Karl Fischer titration (KFT); Measurement with ion-selective electrodes (MEAS CONC); "iTrode" intelligent electrodes; Dosing functions with monitoring, liquid handling; four MSB connectors for additional stirrers or dosing device systems; USB connector; For use with OMNIS Software, tiamo software, or Touch Control; Complies with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required;
- <p>High-end titrator for potentiometric and volumetric Karl Fischer titration with one measuring interface and Dosino dosing units.<br/> </p><ul><li>up to four dosing device systems of the 800 Dosino type</li><li>dynamic (DET), monotonic (MET) and endpoint titration (SET), enzymatic and pH-STAT titrations (STAT), Karl Fischer titration (KFT)</li><li>Measurement with ion-selective electrodes (MEAS CONC)</li><li>"iTrode" intelligent electrodes</li><li>Dosing functions with monitoring, liquid handling</li><li>four MSB connectors for additional stirrers or dosing device systems</li><li>USB connector</li><li>For use with OMNIS Software, <strong><em>tiamo</em></strong> software, or Touch Control</li><li>Complies with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required</li></ul>
- PCS
- 1
- Pt Titrode
- 6.0431.100
- Combined platinum ring electrode with a pH glass membrane as reference electrode.This maintenance free electrode is well suited for redox titrations when the pH value remains constant, e.g.: iodometry; chromatometry; cerimetry; permanganometry; This electrode is stored in deion. water.
- <p>Combined platinum ring electrode with a pH glass membrane as reference electrode.<br/>This maintenance free electrode is well suited for redox titrations when the pH value remains constant, e.g.:<br/> </p><ul><li>iodometry</li><li>chromatometry</li><li>cerimetry</li><li>permanganometry</li></ul><p><br/>This electrode is stored in deion. water.</p>
- PCS
- 1
- OMNIS Software storage device
- 6.06000.000
- License-based PC program for controlling complex OMNIS analysis systems. Sample-oriented operating procedures with numerous templates; Graphical method editor with numerous templates; Clearly organized and professional sample lists; Management of instruments, work systems, sensors, solutions; Dialog languages: German, English, Chinese;
- <p>License-based PC program for controlling complex OMNIS analysis systems. </p><ul><li>Sample-oriented operating procedures with numerous templates</li><li>Graphical method editor with numerous templates</li><li>Clearly organized and professional sample lists</li><li>Management of instruments, work systems, sensors, solutions</li><li>Dialog languages: German, English, Chinese</li></ul><p> </p><p> </p>
- PCS
- 1
- OMNIS stand-alone license with 2 instrument licenses
- 6.06003.012
- Enables stand-alone operation of the OMNIS Software on a Windows™ computer.Features:The license already includes two OMNIS instrument licenses.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;
- <p>Enables stand-alone operation of the OMNIS Software on a Windows™ computer.</p><p>Features:</p><ul><li>The license already includes two OMNIS instrument licenses.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul>
- PCS
- 1
- Pt1000 temperature sensor (installation length 12.5 cm)
- 6.1110.100
- Pt1000 temperature sensor (class B) made of glass.This PT1000 temperature sensor is also available under the article number 6.1110.110 with an installation length of 17.8 cm.
- <p>Pt1000 temperature sensor (class B) made of glass.</p><p>This PT1000 temperature sensor is also available under the article number 6.1110.110 with an installation length of 17.8 cm.</p>
- PCS
- 1
- Micro titration vessel lid / ECO
- 6.1414.060
- PCS
- 1
- Titration vessel with thermostat jacket / 20-90 mL
- 6.1418.220
- PCS
- 1
- Sample beaker, clear glass, 75 mL, 1 piece
- 6.1432.210
- Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece
- <p>Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece<br/> </p>
- PCS
- 30
- Robotic arm with transfer head for 786 Swing Head, right swinging
- 6.1462.040
- Transfer robotic arm for liquid handling purposes
- Transfer robotic arm for liquid handling purposes
- PCS
- 1
- 3-way stopper with antidiffusion valve
- 6.1543.210
- Stopper with three buret tips for connecting 3 x M6 tubing
- Stopper with three buret tips for connecting 3 x M6 tubing
- PCS
- 1
- FEP tubing / M6 / 60 cm
- 6.1805.060
- With light and kink protection
- With light and kink protection
- PCS
- 3
- FEP tubing / M6 / 120 cm
- 6.1805.130
- With light and kink protection
- With light and kink protection
- PCS
- 2
- Thread adapter M6 outer / M8 inner
- 6.1808.040
- Outer thread M6, inner thread M8.
- Outer thread M6, inner thread M8.
- PCS
- 1
- Aspiration tip M8 with M10 screw nipple
- 6.1821.070
- For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.
- <p>For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.</p>
- PCS
- 1
- Support stand for Sample Processors
- 6.2001.070
- Support stand for Sample Processors, for external titrations and dilutions (IC)
- Support stand for Sample Processors, for external titrations and dilutions (IC)
- PCS
- 1
- Clamping ring
- 6.2013.010
- For support rods with a diameter of 10 mm.
- <p>For support rods with a diameter of 10 mm.</p>
- PCS
- 2
- Foil holder
- 6.2037.040
- Foil holder for 75 mL sample beaker for Karl Fischer for KF Sample Changer
- Foil holder for 75 mL sample beaker for Karl Fischer for KF Sample Changer
- PCS
- 30
- Sample rack, 24 x 75 mL, (PVC)
- 6.2041.340
- Sample rack for 810 Sample Processor, 814 USB Sample Processor, 855 Robotic Titrosampler "Light", suitable for 24 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.Plastic: Polyvinyl chloride (PVC)
- <p>Sample rack for 810 Sample Processor, 814 USB Sample Processor, 855 Robotic Titrosampler "Light", suitable for 24 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
- PCS
- 1
- Bottle holder for Dosinos
- 6.2061.010
- Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
- Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
- PCS
- 1
- Electrode Cable 2 m / F
- 6.2104.030
- For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
- For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
- PCS
- 1
- Electrode cable 1 m, 2xB
- 6.2104.080
- With banana plug 4 mm dia. For connecting electrodes with Metrohm plug-in head G to measuring instrument.
- With banana plug 4 mm dia. For connecting electrodes with Metrohm plug-in head G to measuring instrument.
- PCS
- 1
- Cable USB A – mini-DIN 8-pin
- 6.2151.000
- Controller cable
- Controller cable
- PCS
- 1
- Stopper
- 6.2730.030
- Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.
- <p>Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.</p>
- PCS
- 5
- Screw nipple
- 6.2730.060
- PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment
- PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment
- PCS
- 3
- Al foil
- 6.2820.000
- 1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer
- 1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer
- PCS
- 1
- 807 Dosing Unit 10 mL
- 6.3032.210
- 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
- PCS
- 2
- 807 Dosing Unit 50 mL
- 6.3032.250
- 807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- <p>807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
- PCS
- 1
- Holder for transfer tubing, 25 mL
- 6.9915.078
- The 25 mL transfer tubing can be coiled up neatly and mounted on the guide chain of the Sample Processor with the help of the holder.
- <p>The 25 mL transfer tubing can be coiled up neatly and mounted on the guide chain of the Sample Processor with the help of the holder.</p>
- PCS
- 1
- Transfer tubing 25 mL
- 6.9915.079
- The 25 mL 2x M8 transfer tubing is mounted to the guide chain of the Sample Processor with the help of the 6.9915.078 holder
- <p>The 25 mL 2x M8 transfer tubing is mounted to the guide chain of the Sample Processor with the help of the 6.9915.078 holder</p>
- PCS
- 1
-
- OMNIS Stand-Alone license
- 6.06003.010
- Enables stand-alone operation of the OMNIS software on a Windows™ computer.Features:The license already includes one OMNIS instrument license.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;
- <p>Enables stand-alone operation of the OMNIS software on a Windows™ computer.<br/><br/>Features:</p><ul><li>The license already includes one OMNIS instrument license.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul><p> </p>
- PCS
- 1