Você foi redirecionado para a página solicitada
Pedir orçamento
858 Professional Sample Processor CVS with Dosino for sample transfer

858 Professional Sample Processor CVS with Dosino for sample transfer

2.858.0120

858 Professional Sample Processor CVS with Dosino for sample transfer

en

2.858.0120

Visão geral

The 858 Professional Sample Processor CVS with Dosino for sample transfer, in conjunction with Professional VA/CVS instruments and viva, enables the fully automatic processing of large sample series of organic additives in electroplating baths, e.g. brighteners, and suppressors, using "Cyclic Voltammetric Stripping" (CVS). The system is controlled directly by the viva software and permits automatic changes of method between different determination types. The sample rack (supplied) holds 56 samples of a maximum of 11 mL for suppressor determination and 28 samples of a maximum of 50 mL for brightener determination. A Dosino is used for sample transfer into the measuring vessel. This enables reduction and automatic measurement of the sample amount required.

The 858 Professional Sample Processor CVS with Dosino for sample transfer is supplied with built-in robotic arm, together with accessories, Dosino, sample rack, and connection cable for setting up a complete workplace, although it does not come with rinsing equipment.

Especificações técnicas

Dimensions in mm (W/H/D)280/730/500

Capacity

  • 56 sample vessels of 11 mL each (sample volume: 5– 11 mL)
  • 56 sample vessels of 50 mL each (sample volume: 25– 50 mL)

Interface

  • USB interface
  • 3 MSB connectors for Dosinos
    • Piston tongs
    • 6.1546.030
    • For pistons for 807 Dosing Units or cylinder units OMNIS.
    • <p>For pistons for 807 Dosing Units or cylinder units OMNIS.</p>
    • PCS
    • 1
    • Bottle attachment / S 40 / green
    • 6.1602.115
    • For direct dosing from reagent bottles with S 40 thread (Merck...).
    • <p>For direct dosing from reagent bottles with S 40 thread (Merck...).</p>
    • PCS
    • 1
    • Thread adapter S 40 to GL 45
    • 6.1618.020
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • PCS
    • 1
    • Adapter 807 Dosing Unit Port 4, M6 inner 
    • 6.1808.280
    • Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.
    • <p>Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.</p>
    • PCS
    • 1
    • Spiral band 0.5 m
    • 6.1815.010
    • For holding together different cables or tubing.
    • For holding together different cables or tubing.
    • PCS
    • 1
    • PTFE tube
    • 6.1819.010
    • As gas inlet in washing bottle of VA Stand
    • As gas inlet in washing bottle of VA Stand
    • PCS
    • 1
    • PEEK sample tube
    • 6.1835.050
    • For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.
    • For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.
    • PCS
    • 1
    • Sample rack 56 x 11 mL + 56 x 50 mL
    • 6.2041.450
    • Multi-row sample rack for 56 samples in 11 mL sample vessels (6.2743.050) and 56 samples in sample vessels of 50 mL (6.2747.010).
    • <p>Multi-row sample rack for 56 samples in 11 mL sample vessels (6.2743.050) and 56 samples in sample vessels of 50 mL (6.2747.010).</p>
    • PCS
    • 1
    • Holder for Dosino for Sample Processor
    • 6.2057.040
    • Holder for Dosino for the 838 / 858 IC Sample Processor and the 838 Advanced VA Sample Processor
    • Holder for Dosino for the 838 / 858&nbsp;IC Sample Processor and the 838 Advanced VA Sample Processor
    • PCS
    • 1
    • Capillary cutter
    • 6.2621.080
    • Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.
    • <p>Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.</p>
    • PCS
    • 1
    • 1/2 in. wrench
    • 6.2621.090
    • For 1/2 in. screws. For IC Sample Processors
    • For 1/2 in. screws. For IC Sample Processors
    • PCS
    • 1
    • Wrench
    • 6.2739.000
    • For tightening connectors
    • For tightening connectors
    • PCS
    • 1
    • Sample vessel 11 mL
    • 6.2743.057
    • 200 pieces. For IC Sample Processors and VA Autosamplers.The IC sample vessels are made of polypropylene (PP) plastic for health-care applications. Production and packaging both take place under sterile and clean room conditions (Clean Room Class 7, in accordance with DIN ISO 14644). This guarantees minimal degrees of contamination. The sample vessels are subjected to random checks for leachable anions and cations.
    • <p>200 pieces. For IC Sample Processors and VA Autosamplers.</p><p>The IC sample vessels are made of polypropylene (PP) plastic for health-care applications. Production and packaging both take place under sterile and clean room conditions (Clean Room Class 7, in accordance with DIN ISO 14644). This guarantees minimal degrees of contamination. The sample vessels are subjected to random checks for leachable anions and cations.</p>
    • PCS
    • 1
    • Pressure screw 5x
    • 6.2744.010
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • PCS
    • 1
    • Sample vessel 50 mL
    • 6.2747.010
    • With blue screw cap and mL graduation. Set of 25 pieces.
    • <p>With blue screw cap and mL graduation. Set of 25 pieces.</p>
    • PCS
    • 4
    • Safety shield
    • 6.2751.110
    • Safety shield for the Advanced IC/VA Sample Processors.
    • <p>Safety shield for the Advanced IC/VA Sample Processors.</p>
    • PCS
    • 1
    • 807 Dosing Unit 5 mL
    • 6.3032.150
    • 807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • 800 Dosino (cable length 0.65 m)
    • 1.800.0040
    • Drive with write/read hardware for intelligent dosing units. With permanently attached cable (length 0.65 m).
    • <p>Drive with write/read hardware for intelligent dosing units. With permanently attached cable (length 0.65 m).</p>
    • PCS
    • 1
    • 858 Professional Sample Processor
    • 1.858.0010
    • The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.
    • <p>The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.</p>
    • PCS
    • 1
    • Piston tongs
    • 6.1546.030
    • For pistons for 807 Dosing Units or cylinder units OMNIS.
    • <p>For pistons for 807 Dosing Units or cylinder units OMNIS.</p>
    • PCS
    • 1
    • Bottle attachment / S 40 / green
    • 6.1602.115
    • For direct dosing from reagent bottles with S 40 thread (Merck...).
    • <p>For direct dosing from reagent bottles with S 40 thread (Merck...).</p>
    • PCS
    • 1
    • Thread adapter S 40 to GL 45
    • 6.1618.020
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • PCS
    • 1
    • Adapter 807 Dosing Unit Port 4, M6 inner 
    • 6.1808.280
    • Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.
    • <p>Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.</p>
    • PCS
    • 1
    • Spiral band 0.5 m
    • 6.1815.010
    • For holding together different cables or tubing.
    • For holding together different cables or tubing.
    • PCS
    • 1
    • PTFE tube
    • 6.1819.010
    • As gas inlet in washing bottle of VA Stand
    • As gas inlet in washing bottle of VA Stand
    • PCS
    • 1
    • PEEK sample tube
    • 6.1835.050
    • For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.
    • For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.
    • PCS
    • 1
    • Sample rack 56 x 11 mL + 56 x 50 mL
    • 6.2041.450
    • Multi-row sample rack for 56 samples in 11 mL sample vessels (6.2743.050) and 56 samples in sample vessels of 50 mL (6.2747.010).
    • <p>Multi-row sample rack for 56 samples in 11 mL sample vessels (6.2743.050) and 56 samples in sample vessels of 50 mL (6.2747.010).</p>
    • PCS
    • 1
    • Holder for Dosino for Sample Processor
    • 6.2057.040
    • Holder for Dosino for the 838 / 858 IC Sample Processor and the 838 Advanced VA Sample Processor
    • Holder for Dosino for the 838 / 858&nbsp;IC Sample Processor and the 838 Advanced VA Sample Processor
    • PCS
    • 1
    • Capillary cutter
    • 6.2621.080
    • Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.
    • <p>Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.</p>
    • PCS
    • 1
    • 1/2 in. wrench
    • 6.2621.090
    • For 1/2 in. screws. For IC Sample Processors
    • For 1/2 in. screws. For IC Sample Processors
    • PCS
    • 1
    • Wrench
    • 6.2739.000
    • For tightening connectors
    • For tightening connectors
    • PCS
    • 1
    • Sample vessel 11 mL
    • 6.2743.057
    • 200 pieces. For IC Sample Processors and VA Autosamplers.The IC sample vessels are made of polypropylene (PP) plastic for health-care applications. Production and packaging both take place under sterile and clean room conditions (Clean Room Class 7, in accordance with DIN ISO 14644). This guarantees minimal degrees of contamination. The sample vessels are subjected to random checks for leachable anions and cations.
    • <p>200 pieces. For IC Sample Processors and VA Autosamplers.</p><p>The IC sample vessels are made of polypropylene (PP) plastic for health-care applications. Production and packaging both take place under sterile and clean room conditions (Clean Room Class 7, in accordance with DIN ISO 14644). This guarantees minimal degrees of contamination. The sample vessels are subjected to random checks for leachable anions and cations.</p>
    • PCS
    • 1
    • Pressure screw 5x
    • 6.2744.010
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • PCS
    • 1
    • Sample vessel 50 mL
    • 6.2747.010
    • With blue screw cap and mL graduation. Set of 25 pieces.
    • <p>With blue screw cap and mL graduation. Set of 25 pieces.</p>
    • PCS
    • 4
    • Safety shield
    • 6.2751.110
    • Safety shield for the Advanced IC/VA Sample Processors.
    • <p>Safety shield for the Advanced IC/VA Sample Processors.</p>
    • PCS
    • 1
    • 807 Dosing Unit 5 mL
    • 6.3032.150
    • 807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1