You have been redirected to your local version of the requested page

Iron sucrose injection is a medical product commonly used for the treatment of iron deficiency anemia. Iron sucrose is a dark brown liquid which contains sucrose and iron(III) hydroxide in an aqueous solution. Once administered to the blood stream the iron (III) is stored in the protein ferritin where it is available for the production of the protein hemoglobin as a part of the red blood cells, which are essential for the transport of oxygen.

As a medical product, iron sucrose is subject to strict controls. Among other tests, the U.S. Pharmacopeia (USP) requires to monitor the limit of Fe(II) in the iron sucrose injection solution by polarography. The benefit of polarography is that Fe(II) and Fe(III) show signals at different potentials, and therefore an easier determination of Fe(II) without a previous separation of the two oxidation states is possible.

The 884 Professional VA together with the viva software allows a straightforward determination of the Fe(II) content of iron sucrose injection solution following the requirements of the USP. The Fe(II) content is automatically calculated and stored in a database together with all relevant determination and calculation parameters.

Iron sucrose injection solution ampoules

884 Professional VA.
Figure 1. 884 Professional VA.

The concentration of Fe(II) is determined in iron sucrose injection solutions using polarography. Sodium acetate supporting electrolyte is deaerated for 5 minutes. Then the sample is added, and the polarogram is recorded using the parameters listed in Table 1

Table 1. Parameters
Parameter Setting
Working electrode SMDE
Mode DP – Differential Pulse
Start potential -0.1 V
End potential -1.75 V
Peak potential Fe(III) -> Fe(II) -0.75 V
Peak potential Fe(II) -> Fe0 -1.4 V
  • Working electrode: Multi-Mode Electrode pro with standard glass capillaries
  • Reference electrode: Ag/AgCl/KCl (3 mol/L) reference electrode with electrolyte vessel. Bridge electrolyte: KCl (3 mol/L)
  • Auxiliary electrode: Platinum rod electrode

Two signals are recorded, one for the reduction of Fe(III) → Fe(II), and the second for the reduction of Fe(II) → Fe0. The concentration of Fe(II) is calculated as follows:

in which R is defined as:

The total iron concentration w(Fe(total)) is determined in a separate analysis by AAS (atomic absorption spectroscopy).

The calculation in this application can be done automatically in the viva software. 

Figure 2. Determination of iron in iron sucrose injection
Table 2. Result
Sample Fe(II) concentration
Iron sucrose injection 0.33%

United States Pharmacopeia USP 39–NF 34

Contato

Metrohm Brasil

Rua Minerva, 161
05007-030 São Paulo

Contato

Internal references: AW CH4-0452-112006; AW VA CH4-0565-042017