Zostałaś(eś) przekierowany do lokalnej wersji strony
Zapytaj o ofertę
"ProfIC 9 – Anion" – Professional IC System for trace analysis with Inline Calibration, Sample Preconcentration and Matrix Elimination

"ProfIC 9 – Anion" – Professional IC System for trace analysis with Inline Calibration, Sample Preconcentration and Matrix Elimination

ProfIC-09-Anion

  • Przegląd funkcji
  • Specyfikacja techniczna

The Professional IC system with conductivity detection enables ultratrace analysis of anions down to the lowest ppt range (ng/L) in complex matrices. The "ProfIC 9" with Metrohm Inline Sample Preconcentration, Inline Calibration and Inline Matrix Elimination enables chromatography without limitation by the matrix and guarantees a long lifetime for the analytic separation column.
 

Wyposaż Twój "ProfIC 9 – Anion" – Professional IC System for trace analysis with Inline Calibration, Sample Preconcentration and Matrix Eliminationdownload Pobierz akcesoria pdf
  • części w zestawie
  • opcjonalne części
800 Dosino
800 Dosino
2.800.0010
The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
IC Conductivity Detector
IC Conductivity Detector
2.850.9010
Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.
858 Professional Sample Processor
858 Professional Sample Processor
2.858.0010
The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.
Metrosep I Trap 1 - 100/4.0
Metrosep I Trap 1 - 100/4.0
6.1014.200
The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
Zobacz więcej