Zostałaś(eś) przekierowany do lokalnej wersji strony
Zapytaj o ofertę
Conversion Kit: OMNIS Sample Robot M/L P&P to WSM

Conversion Kit: OMNIS Sample Robot M/L P&P to WSM

6.05800.630

  • Przegląd funkcji

This set contains the required parts for preparing an existing Sample Robot Pick&Place M or L, which has a maximum of 1 pump module and 2 Pick&Place Modules, for the utilization of an OMNIS Workstation Module.

Wyposaż Twój Conversion Kit: OMNIS Sample Robot M/L P&P to WSMdownload Pobierz akcesoria pdf
  • opcjonalne części
OMNIS Workstation Module (1T/0P)
OMNIS Workstation Module (1T/0P)
2.1024.0010
Module for installation in the OMNIS Sample Robot WSM. This module contains a workstation for the automatic processing of sample vessels without pumps. The workstation takes up the sample beaker for the analysis. Used sensors can be cleaned or parked in the storage beaker of the workstation between analyses. If stirring is required during the analysis, then a separate rod stirrer or a magnetic stirrer can be attached for this workstation.
OMNIS Workstation Module (1T/2P)
OMNIS Workstation Module (1T/2P)
2.1024.0020
Module for installation in the OMNIS Sample Robot WSM. This module contains a workstation for the automatic processing of sample vessels and two pumps for the automatic cleaning (rinsing and extraction) of sample vessels and sensors. The workstation takes up the sample beaker for the analysis. Used sensors can be cleaned or parked in the storage beaker of the workstation between analyses. If stirring is required during the analysis, then a separate rod stirrer or a magnetic stirrer can be installed for this workstation.
OMNIS Workstation Module (2T/4P)
OMNIS Workstation Module (2T/4P)
2.1024.0030
Module for installation in the OMNIS Sample Robot WSM. This module contains 2 workstations for the automatic processing of sample vessels and 4 pumps for the automatic cleaning of sample vessels and sensors (rinsing and extraction) at both workstations. The workstations take up the sample beaker for the analysis. Used sensors can be cleaned or parked in the storage beakers of the workstations between analyses. If stirring is required during the analysis, then a separate rod stirrer or a magnetic stirrer can be installed for each workstation.