You have been redirected to your local version of the requested page
Request quote
«ProfIC 15 – Cation» – Professional IC system for Partial Loop Injection

«ProfIC 15 – Cation» – Professional IC system for Partial Loop Injection

ProfIC-15-Cation

«ProfIC 15 – Cation» – Professional IC system for Partial Loop Injection

en

ProfIC-15-Cation

Feature overview

Professional IC system applying conductivity detection and « Partial Loop Injection» For the fully automatic determination of cations and anions (non-suppressed).

«Partial Loop Injection» enables concentrated samples to be injected without previous dilution as well as multipoint calibrations, using just one standard solution. «ProfIC 15» safely controls all routine tasks in ion chromatography. It is simple to use and very reliable.
 

Schematic diagram
 

Tech specs


Components

1 x 2.800.0010 800 Dosino
1 x 2.850.1010 850 Professional IC
1 x 2.850.9010 850 Conductivity Detector
1 x 2.858.0010 858 Professional Sample Processor
1 x 6.1825.290 PEEK sample loop 250 µL
1 x 6.1831.180 PEEK capillary 0.5 mm i.D., 3 m
1 x 6.1841.000 PEEK transfer capillary 2 mL
1 x 6.2841.100 Rinsing Station for IC Sample Processor
1 x 6.3032.120 Dosing unit 2 mL
1 x 6.5330.040 IC Equipment for Liquid Handling

 

IC column, sample rack, sample vials as well as MagIC Net have to be ordered separately, depending on the particular application.
This product has been discontinued, but is still supported.
Go to replacement product
    • 800 Dosino
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 1
    • IC Conductivity Detector
    • 2.850.9010
    • Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.
    • <p>Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.</p>
    • PCS
    • 1
    • 858 Professional Sample Processor
    • 2.858.0010
    • The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.
    • <p>The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.</p>
    • PCS
    • 1
    • PEEK sample loop 250 µL
    • 6.1825.290
    • Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.
    • <p>Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.</p>
    • PCS
    • 1
    • 807 Dosing Unit 2 mL
    • 6.3032.120
    • 807 Dosing Unit with integrated data chip with 2 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 2 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • IC equipment for Liquid Handling with the Dosino
    • 6.5330.040
    • Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.
    • <p>Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.</p>
    • PCS
    • 1
    • 800 Dosino
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 1
    • IC Conductivity Detector
    • 2.850.9010
    • Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.
    • <p>Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.</p>
    • PCS
    • 1
    • 858 Professional Sample Processor
    • 2.858.0010
    • The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.
    • <p>The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.</p>
    • PCS
    • 1
    • PEEK sample loop 250 µL
    • 6.1825.290
    • Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.
    • <p>Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.</p>
    • PCS
    • 1
    • 807 Dosing Unit 2 mL
    • 6.3032.120
    • 807 Dosing Unit with integrated data chip with 2 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 2 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • IC equipment for Liquid Handling with the Dosino
    • 6.5330.040
    • Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.
    • <p>Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.</p>
    • PCS
    • 1
    • Metrosep C 4 - 150/4.0
    • 6.1050.420
    • The Metrosep C 4 - 150/4.0 is the universal standard column in cation analysis for accomplishing high separating efficiency in a short time. The Metrosep C 4 - 150/4.0 is the ideal separation column for the analysis of alkaline and earth alkaline metals in aqueous media.
    • <p>The Metrosep C 4 - 150/4.0 is the universal standard column in cation analysis for accomplishing high separating efficiency in a short time. The Metrosep C 4 - 150/4.0 is the ideal separation column for the analysis of alkaline and earth alkaline metals in aqueous media.</p>
    • PCS
    • 1
    • Metrosep C 4 Guard/4.0
    • 6.1050.500
    • The Metrosep C 4 Guard/4.0 contains the C-4 column material and is used to protect all Metrosep cation columns that have a substrate based on silica gel. Particles and contamination are reliably retained, considerably prolonging the service life of the analytical separation column. The economical price is an additional plus. The Metrosep C 4 Guard/4.0 also works based on the "On Column Guard System" and is screwed directly onto the separation column with virtually no dead volume.
    • <p>The Metrosep C 4 Guard/4.0 contains the C-4 column material and is used to protect all Metrosep cation columns that have a substrate based on silica gel. Particles and contamination are reliably retained, considerably prolonging the service life of the analytical separation column. The economical price is an additional plus. The Metrosep C 4 Guard/4.0 also works based on the &#34;On Column Guard System&#34; and is screwed directly onto the separation column with virtually no dead volume.</p>
    • PCS
    • 1
    • Bottle / 300 mL
    • 6.1608.080
    • Rinsing vessel for IC Sample Processors.
    • <p>Rinsing vessel for IC Sample Processors.</p>
    • PCS
    • 1
    • Sample rack, 148 x 11 mL and 3 x 300 mL (PVC)
    • 6.2041.440
    • Sample rack for 858 Professional Sample Processor, 815 Robotic USB Sample Processor XL, suitable for 148 sample vessels and 3 rinsing bottles. The following sample vessels and rinsing bottles can be used: 6.2743.050, 6.1608.080, 6.1627.000, 6.2743.040.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 858 Professional Sample Processor, 815 Robotic USB Sample Processor XL, suitable for 148 sample vessels and 3 rinsing bottles. The following sample vessels and rinsing bottles can be used: 6.2743.050, 6.1608.080, 6.1627.000, 6.2743.040.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • Sample rack 54 x 11 mL + 1 x 300 mL
    • 6.2041.760
    • Sample rack with small diameter for 54 x 11 mL sample vessels in two rows and additionally 1 x 300 mL bottle.
    • <p>Sample rack with small diameter for 54 x 11 mL sample vessels in two rows and additionally 1 x 300 mL bottle.</p>
    • PCS
    • 1
    • Vial PP, 2.5 mL, 2000 pieces
    • 6.2743.040
    • 2.5 mL. 2000 pieces. For IC Sample Processors.The IC sample vessels are made of polypropylene (PP) plastic for health-care applications. Production and packaging both take place under sterile and clean-room conditions (Clean Room Class 7, in accordance with DIN ISO 14644). This guarantees minimal degrees of contamination. The sample vessels are subjected to random checks for leachable anions and cations.
    • <p>2.5 mL. 2000 pieces. For IC Sample Processors.<br />The IC sample vessels are made of polypropylene (PP) plastic for health-care applications. Production and packaging both take place under sterile and clean-room conditions (Clean Room Class 7, in accordance with DIN ISO 14644). This guarantees minimal degrees of contamination. The sample vessels are subjected to random checks for leachable anions and cations.</p>
    • PCS
    • 1
    • Sample vessel 11 mL
    • 6.2743.050
    • 2000 pieces. For IC Sample Processors and VA Autosamplers.The IC sample vessels are made of polypropylene (PP) plastic for health-care applications. Production and packaging both take place under sterile and clean room conditions (Clean Room Class 7, in accordance with DIN ISO 14644). This guarantees minimal degrees of contamination. The sample vessels are subjected to random checks for leachable anions and cations.
    • <p>2000 pieces. For IC Sample Processors and VA Autosamplers.</p><p>The IC sample vessels are made of polypropylene (PP) plastic for health-care applications. Production and packaging both take place under sterile and clean room conditions (Clean Room Class 7, in accordance with DIN ISO 14644). This guarantees minimal degrees of contamination. The sample vessels are subjected to random checks for leachable anions and cations.</p>
    • PCS
    • 1
    • IQ/OQ Kit for IC
    • 6.5333.000
    • The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.
    • The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.
    • PCS
    • 1
    • Connection set to 807 Dosing Unit: Port 4
    • 6.5620.000
    • For the connection of an M6 tubing to Port 4 on an 807 Dosing Unit (transition from luer to M6), including holder safety device 
    • <p>For the connection of an M6 tubing to Port 4 on an 807 Dosing Unit (transition from luer to M6), including holder safety device</p><p> </p>
    • PCS
    • 1