You have been redirected to your local version of the requested page
Request quote
Automated pipetting and titration system for up to 100 samples

Automated pipetting and titration system for up to 100 samples

MATi 08

Automated pipetting and titration system for up to 100 samples

en

MATi 08
    • 786 Swing Head
    • 2.786.0040
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • PCS
    • 1
    • 800 Dosino
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 2
    • 802 Stirrer for 804 Ti Stand
    • 2.802.0040
    • Rod stirrer including 6.1909.010 stirring propeller.
    • Rod stirrer including 6.1909.010 stirring propeller.
    • PCS
    • 1
    • 804 Ti Stand without stand rod
    • 2.804.0010
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • PCS
    • 1
    • 815 Robotic USB Sample Processor XL (1T/2P)
    • 2.815.0020
    • Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS. 
    • <p>Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.<br/> <br/>Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.</p><p>The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.<br/> </p>
    • PCS
    • 1
    • 854 iConnect
    • 2.854.0010
    • The 854 iConnect – Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes (cable length 150 cm).
    • <p>The 854 iConnect – Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes (cable length 150 cm).</p>
    • PCS
    • 1
    • 905 Titrando
    • 2.905.0010
    • High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems. up to four dosing systems of the 800 Dosino type; dynamic (DET), monotonic (MET), and endpoint titration (SET); Measurement with ion-selective electrodes (MEAS CONC); Dosing functions with monitoring, Liquid Handling; four MSB connectors for additional stirrers or dosing systems; "iTrode" intelligent electrodes; USB connector; For use with OMNIS Software, tiamo software, or Touch Control unit; Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required;  
    • <p>High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems.<br/> </p><ul><li>up to four dosing systems of the 800 Dosino type</li><li>dynamic (DET), monotonic (MET), and endpoint titration (SET)</li><li>Measurement with ion-selective electrodes (MEAS CONC)</li><li>Dosing functions with monitoring, Liquid Handling</li><li>four MSB connectors for additional stirrers or dosing systems</li><li>"iTrode" intelligent electrodes</li><li>USB connector</li><li>For use with OMNIS Software, <em>tiamo</em> software, or Touch Control unit</li><li>Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required</li></ul><p> </p>
    • PCS
    • 1
    • iEcotrode Plus
    • 6.0280.300
    • Intelligent, combined pH electrode with integrated memory chip for storing of sensor data. This electrode is suitable for aqueous acid/base titrations. The fixed ground-joint diaphragm is insensitive to contamination.Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.
    • <p>Intelligent, combined pH electrode with integrated memory chip for storing of sensor data. This electrode is suitable for aqueous acid/base titrations. <br/><br/>The fixed ground-joint diaphragm is insensitive to contamination.<br/>Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.<br/>iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.</p>
    • PCS
    • 1
    • OMNIS Software storage device
    • 6.06000.000
    • License-based PC program for controlling complex OMNIS analysis systems. Sample-oriented operating procedures with numerous templates; Graphical method editor with numerous templates; Clearly organized and professional sample lists; Management of instruments, work systems, sensors, solutions; Dialog languages: German, English, Chinese;   
    • <p>License-based PC program for controlling complex OMNIS analysis systems. </p><ul><li>Sample-oriented operating procedures with numerous templates</li><li>Graphical method editor with numerous templates</li><li>Clearly organized and professional sample lists</li><li>Management of instruments, work systems, sensors, solutions</li><li>Dialog languages: German, English, Chinese</li></ul><p> </p><p> </p>
    • PCS
    • 1
    • OMNIS stand-alone license with 2 instrument licenses
    • 6.06003.012
    • Enables stand-alone operation of the OMNIS Software on a Windows™ computer.Features:The license already includes two OMNIS instrument licenses.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;
    • <p>Enables stand-alone operation of the OMNIS Software on a Windows™ computer.</p><p>Features:</p><ul><li>The license already includes two OMNIS instrument licenses.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul>
    • PCS
    • 1
    • Titration vessel lid automation
    • 6.1414.080
    • Titration vessel lid for external use with the 6.1415.250 titration vessel base in automation.
    • <p>Titration vessel lid for external use with the 6.1415.250 titration vessel base in automation.</p>
    • PCS
    • 1
    • Sample beaker, clear glass, 75 mL, 1 piece 
    • 6.1432.210
    • Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece 
    • <p>Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece<br/> </p>
    • PCS
    • 100
    • Guide shaft to pipetting tubing
    • 6.1823.010
    • For assembly in the transfer robotic arm on the Robotic Sample Processors
    • For assembly in the transfer robotic arm on the Robotic Sample Processors
    • PCS
    • 1
    • Support stand for Sample Processors
    • 6.2001.070
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • PCS
    • 1
    • Sample rack, 100 x 75 mL, (PVC)
    • 6.2041.800
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 100 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 100 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • Buffer solution pH 4 (500 mL)
    • 6.2307.100
    • Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
    • Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
    • PCS
    • 1
    • Buffer solution pH 7 (500 mL)
    • 6.2307.110
    • Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
    • Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
    • PCS
    • 1
    • Buffer solution pH 9 (500 mL)
    • 6.2307.120
    • Ready-to-use buffer solution pH = 9 (25 °C), colorless, with closure seal
    • Ready-to-use buffer solution pH =&nbsp;9 (25 °C), colorless, with closure seal
    • PCS
    • 1
    • pHit kit
    • 6.2325.000
    • Maintenance kit for pH electrodes The kit contains:50 mL cleaning solution; 50 mL 3M KCl solution; 50 mL storage solution; 2 Storage vessels; Instructions for use;
    • <p>Maintenance kit for pH electrodes </p><p>The kit contains:</p><ul><li>50 mL cleaning solution</li><li>50 mL&nbsp;3M KCl solution</li><li>50 mL&nbsp;storage solution</li><li>2 Storage vessels</li><li>Instructions for use</li></ul>
    • PCS
    • 1
    • Screw nipple
    • 6.2730.080
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCS
    • 1
    • Wrench
    • 6.2739.000
    • For tightening connectors
    • For tightening connectors
    • PCS
    • 1
    • Safety shield Transfer set to 789/815
    • 6.2751.120
    • Safety shield for Sample Processors with 786 Swing Head and transfer set.
    • <p>Safety shield for Sample Processors with 786 Swing Head and transfer set.</p>
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 2
    • 786 Swing Head
    • 2.786.0040
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • PCS
    • 1
    • 800 Dosino
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 2
    • 802 Stirrer for 804 Ti Stand
    • 2.802.0040
    • Rod stirrer including 6.1909.010 stirring propeller.
    • Rod stirrer including 6.1909.010 stirring propeller.
    • PCS
    • 1
    • 804 Ti Stand without stand rod
    • 2.804.0010
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • PCS
    • 1
    • 815 Robotic USB Sample Processor XL (1T/2P)
    • 2.815.0020
    • Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS. 
    • <p>Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.<br/> <br/>Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.</p><p>The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.<br/> </p>
    • PCS
    • 1
    • 854 iConnect
    • 2.854.0010
    • The 854 iConnect – Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes (cable length 150 cm).
    • <p>The 854 iConnect – Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes (cable length 150 cm).</p>
    • PCS
    • 1
    • 905 Titrando
    • 2.905.0010
    • High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems. up to four dosing systems of the 800 Dosino type; dynamic (DET), monotonic (MET), and endpoint titration (SET); Measurement with ion-selective electrodes (MEAS CONC); Dosing functions with monitoring, Liquid Handling; four MSB connectors for additional stirrers or dosing systems; "iTrode" intelligent electrodes; USB connector; For use with OMNIS Software, tiamo software, or Touch Control unit; Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required;  
    • <p>High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems.<br/> </p><ul><li>up to four dosing systems of the 800 Dosino type</li><li>dynamic (DET), monotonic (MET), and endpoint titration (SET)</li><li>Measurement with ion-selective electrodes (MEAS CONC)</li><li>Dosing functions with monitoring, Liquid Handling</li><li>four MSB connectors for additional stirrers or dosing systems</li><li>"iTrode" intelligent electrodes</li><li>USB connector</li><li>For use with OMNIS Software, <em>tiamo</em> software, or Touch Control unit</li><li>Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required</li></ul><p> </p>
    • PCS
    • 1
    • iEcotrode Plus
    • 6.0280.300
    • Intelligent, combined pH electrode with integrated memory chip for storing of sensor data. This electrode is suitable for aqueous acid/base titrations. The fixed ground-joint diaphragm is insensitive to contamination.Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.
    • <p>Intelligent, combined pH electrode with integrated memory chip for storing of sensor data. This electrode is suitable for aqueous acid/base titrations. <br/><br/>The fixed ground-joint diaphragm is insensitive to contamination.<br/>Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.<br/>iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.</p>
    • PCS
    • 1
    • OMNIS Software storage device
    • 6.06000.000
    • License-based PC program for controlling complex OMNIS analysis systems. Sample-oriented operating procedures with numerous templates; Graphical method editor with numerous templates; Clearly organized and professional sample lists; Management of instruments, work systems, sensors, solutions; Dialog languages: German, English, Chinese;   
    • <p>License-based PC program for controlling complex OMNIS analysis systems. </p><ul><li>Sample-oriented operating procedures with numerous templates</li><li>Graphical method editor with numerous templates</li><li>Clearly organized and professional sample lists</li><li>Management of instruments, work systems, sensors, solutions</li><li>Dialog languages: German, English, Chinese</li></ul><p> </p><p> </p>
    • PCS
    • 1
    • OMNIS stand-alone license with 2 instrument licenses
    • 6.06003.012
    • Enables stand-alone operation of the OMNIS Software on a Windows™ computer.Features:The license already includes two OMNIS instrument licenses.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;
    • <p>Enables stand-alone operation of the OMNIS Software on a Windows™ computer.</p><p>Features:</p><ul><li>The license already includes two OMNIS instrument licenses.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul>
    • PCS
    • 1
    • Titration vessel lid automation
    • 6.1414.080
    • Titration vessel lid for external use with the 6.1415.250 titration vessel base in automation.
    • <p>Titration vessel lid for external use with the 6.1415.250 titration vessel base in automation.</p>
    • PCS
    • 1
    • Sample beaker, clear glass, 75 mL, 1 piece 
    • 6.1432.210
    • Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece 
    • <p>Sample beaker, clear glass, 75 mL, suitable for sample racks: 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece<br/> </p>
    • PCS
    • 100
    • Guide shaft to pipetting tubing
    • 6.1823.010
    • For assembly in the transfer robotic arm on the Robotic Sample Processors
    • For assembly in the transfer robotic arm on the Robotic Sample Processors
    • PCS
    • 1
    • Support stand for Sample Processors
    • 6.2001.070
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • PCS
    • 1
    • Sample rack, 100 x 75 mL, (PVC)
    • 6.2041.800
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 100 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler “Basic” suitable for 100 sample beakers. The following sample beakers can be used: 6.1432.210, 6.1459.400.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • Buffer solution pH 4 (500 mL)
    • 6.2307.100
    • Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
    • Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
    • PCS
    • 1
    • Buffer solution pH 7 (500 mL)
    • 6.2307.110
    • Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
    • Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
    • PCS
    • 1
    • Buffer solution pH 9 (500 mL)
    • 6.2307.120
    • Ready-to-use buffer solution pH = 9 (25 °C), colorless, with closure seal
    • Ready-to-use buffer solution pH =&nbsp;9 (25 °C), colorless, with closure seal
    • PCS
    • 1
    • pHit kit
    • 6.2325.000
    • Maintenance kit for pH electrodes The kit contains:50 mL cleaning solution; 50 mL 3M KCl solution; 50 mL storage solution; 2 Storage vessels; Instructions for use;
    • <p>Maintenance kit for pH electrodes </p><p>The kit contains:</p><ul><li>50 mL cleaning solution</li><li>50 mL&nbsp;3M KCl solution</li><li>50 mL&nbsp;storage solution</li><li>2 Storage vessels</li><li>Instructions for use</li></ul>
    • PCS
    • 1
    • Screw nipple
    • 6.2730.080
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCS
    • 1
    • Wrench
    • 6.2739.000
    • For tightening connectors
    • For tightening connectors
    • PCS
    • 1
    • Safety shield Transfer set to 789/815
    • 6.2751.120
    • Safety shield for Sample Processors with 786 Swing Head and transfer set.
    • <p>Safety shield for Sample Processors with 786 Swing Head and transfer set.</p>
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 2
    • iAquatrode Plus with Pt1000
    • 6.0277.300
    • Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. The fixed ground-joint diaphragm is insensitive to contamination. When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.
    • <p>Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. <br/><br/>The fixed ground-joint diaphragm is insensitive to contamination. <br/>When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.<br/>The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO<sub>3</sub>) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.<br/>iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.</p>
    • PCS
    • 1
    • iUnitrode with Pt1000
    • 6.0278.300
    • Intelligent, combined pH electrode with integrated memory chip for storing sensor data and Pt1000 temperature sensor. This electrode is particularly suitable:for pH measurements and titrations in difficult, viscous, or alkaline samples; at elevated temperatures; for long-term measurements; The fixed ground-joint diaphragm is insensitive to contamination.Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.Alternatively: reference electrolyte for measurements at T>80°C: Idrolyte, storage in Idrolyte.iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.
    • <p>Intelligent, combined pH electrode with integrated memory chip for storing sensor data and Pt1000 temperature sensor. This electrode is particularly suitable:</p><ul><li>for pH measurements and titrations in difficult, viscous, or alkaline samples</li><li>at elevated temperatures</li><li>for long-term measurements</li></ul><p>The fixed ground-joint diaphragm is insensitive to contamination.<br/><br/>Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.<br/>Alternatively: reference electrolyte for measurements at T&gt;80°C: Idrolyte, storage in Idrolyte.<br/>iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.</p>
    • PCS
    • 1
    • OMNIS Stand-Alone license
    • 6.06003.010
    • Enables stand-alone operation of the OMNIS software on a Windows™ computer.Features:The license already includes one OMNIS instrument license.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;  
    • <p>Enables stand-alone operation of the OMNIS software on a Windows™ computer.<br/><br/>Features:</p><ul><li>The license already includes one OMNIS instrument license.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul><p> </p>
    • PCS
    • 1