You have been redirected to your local version of the requested page
Request quote
Fully automated water analysis

Fully automated water analysis

MATi 01

    • 786 Swing Head
    • 2.786.0040
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • PCS
    • 1
    • 800 Dosino
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 3
    • 802 Stirrer for 804 Ti Stand
    • 2.802.0040
    • Rod stirrer including 6.1909.010 stirring propeller.
    • Rod stirrer including 6.1909.010 stirring propeller.
    • PCS
    • 1
    • 804 Ti Stand without stand rod
    • 2.804.0010
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • PCS
    • 1
    • 815 Robotic USB Sample Processor XL (2T/4P)
    • 2.815.0120
    • Robotic USB Sample Processor XL with two workstations and four built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head, and sample vessels must be tailored to the application and ordered separately.The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS. 
    • <p>Robotic USB Sample Processor XL with two workstations and four built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.<br/> <br/>Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head, and sample vessels must be tailored to the application and ordered separately.</p><p>The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.<br/> </p>
    • PCS
    • 1
    • 856 Conductivity Module
    • 2.856.0010
    • Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
    • <p>Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. <br/><br/>The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.<br/>For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.</p>
    • PCS
    • 1
    • 905 Titrando
    • 2.905.0020
    • High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing systems. up to four dosing systems of the 800 Dosino type; dynamic (DET), monotonic (MET), and endpoint titration (SET); Measurement with ion-selective electrodes (MEAS CONC); Dosing functions with monitoring, Liquid Handling; four MSB connectors for additional stirrers or dosing systems; "iTrode" intelligent electrodes; USB connector; For use with OMNIS Software, tiamo software, or Touch Control unit; Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required;  
    • <p>High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing systems.<br/> </p><ul><li>up to four dosing systems of the 800 Dosino type</li><li>dynamic (DET), monotonic (MET), and endpoint titration (SET)</li><li>Measurement with ion-selective electrodes (MEAS CONC)</li><li>Dosing functions with monitoring, Liquid Handling</li><li>four MSB connectors for additional stirrers or dosing systems</li><li>"iTrode" intelligent electrodes</li><li>USB connector</li><li>For use with OMNIS Software, <em>tiamo</em> software, or Touch Control unit</li><li>Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required</li></ul><p> </p>
    • PCS
    • 1
    • Aquatrode Plus with Pt1000
    • 6.0257.600
    • Combined pH electrode with integrated Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. The fixed ground-joint diaphragm is insensitive to contamination. When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)), storage in the used bridge electrolyte.
    • <p>Combined pH electrode with integrated Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. <br/><br/>The fixed ground-joint diaphragm is insensitive to contamination. <br/>When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.<br/>The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO<sub>3</sub>) = 1 mol/L (6.2310.010)), storage in the used bridge electrolyte.</p>
    • PCS
    • 1
    • Combined polymer membrane electrode, Ca
    • 6.0510.100
    • Combined calcium-selective electrode with polymer membrane.This ISE is suitable for: ion measurements of Ca2+ (5*10-7 to 1 mol/L) in aqueous solutions; complexometric (back) titrations (e.g., determination of water hardness) ; Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.The reference electrolyte used is c(NH4NO3) = 1 mol/L.
    • <p>Combined calcium-selective electrode with polymer membrane.<br/>This ISE is suitable for:<br/> </p><ul><li>ion measurements of Ca<sup>2+</sup> (5*10<sup>-7</sup> to 1 mol/L) in aqueous solutions</li><li>complexometric (back) titrations (e.g., determination of water hardness)<br/> </li></ul><p>Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.<br/>The reference electrolyte used is c(NH<sub>4</sub>NO<sub>3</sub>) = 1 mol/L.</p>
    • PCS
    • 1
    • OMNIS Software storage device
    • 6.06000.000
    • License-based PC program for controlling complex OMNIS analysis systems. Sample-oriented operating procedures with numerous templates; Graphical method editor with numerous templates; Clearly organized and professional sample lists; Management of instruments, work systems, sensors, solutions; Dialog languages: German, English, Chinese;   
    • <p>License-based PC program for controlling complex OMNIS analysis systems. </p><ul><li>Sample-oriented operating procedures with numerous templates</li><li>Graphical method editor with numerous templates</li><li>Clearly organized and professional sample lists</li><li>Management of instruments, work systems, sensors, solutions</li><li>Dialog languages: German, English, Chinese</li></ul><p> </p><p> </p>
    • PCS
    • 1
    • OMNIS Stand-Alone: 1 instrument license
    • 6.06002.010
    • 1 instrument license for operating one additional OMNIS instrument in OMNIS Stand-Alone.The following instruments are supported:OMNIS instruments; Metrohm USB devices; RS-232 instruments (e.g., balance);   
    • <p>1 instrument license for operating one additional OMNIS instrument in OMNIS Stand-Alone.<br/><br/>The following instruments are supported:</p><ul><li>OMNIS instruments</li><li>Metrohm USB devices</li><li>RS-232 instruments (e.g., balance)</li></ul><p> </p><p> </p>
    • PCS
    • 1
    • OMNIS stand-alone license with 2 instrument licenses
    • 6.06003.012
    • Enables stand-alone operation of the OMNIS Software on a Windows™ computer.Features:The license already includes two OMNIS instrument licenses.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;
    • <p>Enables stand-alone operation of the OMNIS Software on a Windows™ computer.</p><p>Features:</p><ul><li>The license already includes two OMNIS instrument licenses.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul>
    • PCS
    • 1
    • 5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable 2 m)
    • 6.0920.100
    • 5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable (2.0 m) for connecting to an 856 Conductivity Module in combination with a sample changer.This sensor is suitable for automated measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;  
    • <p>5-ring conductivity measuring cell with cell constant c = 0.7 cm<sup>-1 </sup>(guide value), with integrated Pt1000 temperature sensor and fixed cable (2.0 m) for connecting to an 856 Conductivity Module in combination with a sample changer.<br />This sensor is suitable for automated measurements of medium conductivities (5 &micro;S/cm to 20 mS/cm), e.g., in:</p><ul><li>drinking water</li><li>surface water</li><li>wastewater</li></ul><p>&nbsp;</p>
    • PCS
    • 1
    • Titration vessel lid automation
    • 6.1414.080
    • Titration vessel lid for external use with the 6.1415.250 titration vessel base in automation.
    • <p>Titration vessel lid for external use with the 6.1415.250 titration vessel base in automation.</p>
    • PCS
    • 1
    • Sample beaker, plastic (PP), 120 mL, 250 pieces 
    • 6.1459.300
    • Sample beaker, plastic (polypropylene, PP), 120 mL, suitable for sample racks: 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030, and 6.9920.141, 250 pieces 
    • <p>Sample beaker, plastic (polypropylene, PP), 120 mL, suitable for sample racks: 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030, and 6.9920.141, 250 pieces<br/> </p>
    • PCS
    • 1
    • Tubing adapter olive / M8 outer
    • 6.1808.050
    • 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
    • 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
    • PCS
    • 2
    • Spiral band 0.5 m
    • 6.1815.010
    • For holding together different cables or tubing.
    • For holding together different cables or tubing.
    • PCS
    • 1
    • Tube
    • 6.1819.020
    • For M6 threaded holes. For 6.1602.1XX bottle attachments
    • For M6 threaded holes. For 6.1602.1XX bottle attachments
    • PCS
    • 1
    • Support stand for Sample Processors
    • 6.2001.070
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • PCS
    • 1
    • Sample rack, 59 x 120 mL, (PVC)
    • 6.2041.840
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 59 sample beakers. The following sample beakers can be used: 6.1459.300, 6.1459.307.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 59 sample beakers. The following sample beakers can be used: 6.1459.300, 6.1459.307.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • Bottle holder for Dosinos
    • 6.2061.010
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • PCS
    • 1
    • Electrode cable / 1 m / F
    • 6.2104.020
    • For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
    • For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
    • PCS
    • 1
    • Buffer solution pH 4 (500 mL)
    • 6.2307.100
    • Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
    • Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
    • PCS
    • 1
    • Buffer solution pH 7 (500 mL)
    • 6.2307.110
    • Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
    • Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
    • PCS
    • 1
    • Buffer solution pH 9 (500 mL)
    • 6.2307.120
    • Ready-to-use buffer solution pH = 9 (25 °C), colorless, with closure seal
    • Ready-to-use buffer solution pH =&nbsp;9 (25 °C), colorless, with closure seal
    • PCS
    • 1
    • Conductivity standard 100 µS/cm 250 mL
    • 6.2324.010
    • Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
    • Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
    • PCS
    • 1
    • pHit kit
    • 6.2325.000
    • Maintenance kit for pH electrodes The kit contains:50 mL cleaning solution; 50 mL 3M KCl solution; 50 mL storage solution; 2 Storage vessels; Instructions for use;
    • <p>Maintenance kit for pH electrodes </p><p>The kit contains:</p><ul><li>50 mL cleaning solution</li><li>50 mL&nbsp;3M KCl solution</li><li>50 mL&nbsp;storage solution</li><li>2 Storage vessels</li><li>Instructions for use</li></ul>
    • PCS
    • 1
    • Electrolyte NH4NO3 1 mol/L (50 mL)
    • 6.2327.000
    • Electrolyte solution c(NH4NO3) =1 mol/L (for combined Ca-ISE 6.0510.100)
    • Electrolyte solution c(NH<SUB>4</SUB>NO<SUB>3</SUB>) =1 mol/L (for combined Ca-ISE 6.0510.100)
    • PCS
    • 1
    • Screw nipple
    • 6.2730.080
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCS
    • 1
    • Wrench
    • 6.2739.000
    • For tightening connectors
    • For tightening connectors
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • 807 Dosing Unit 20 mL
    • 6.3032.220
    • 807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 2
    • Overflow buret (100 mL) for Sample Processor
    • 6.9958.007
    • Overflow buret for rapid and automatic measuring of 100 mL of sample and for sample transfer into an external titration vessel.
    • <p>Overflow buret for rapid and automatic measuring of 100 mL of sample and for sample transfer into an external titration vessel.</p>
    • PCS
    • 1
    • 786 Swing Head
    • 2.786.0040
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
    • PCS
    • 1
    • 800 Dosino
    • 2.800.0010
    • The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
    • <p>The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).</p>
    • PCS
    • 3
    • 802 Stirrer for 804 Ti Stand
    • 2.802.0040
    • Rod stirrer including 6.1909.010 stirring propeller.
    • Rod stirrer including 6.1909.010 stirring propeller.
    • PCS
    • 1
    • 804 Ti Stand without stand rod
    • 2.804.0010
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • Titration stand and controller for 802 Stirrer. The 804 Ti Stand together with the optional 802 Stirrer provides an alternative to the magnetic stirrer. Without stand.
    • PCS
    • 1
    • 815 Robotic USB Sample Processor XL (2T/4P)
    • 2.815.0120
    • Robotic USB Sample Processor XL with two workstations and four built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head, and sample vessels must be tailored to the application and ordered separately.The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS. 
    • <p>Robotic USB Sample Processor XL with two workstations and four built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.<br/> <br/>Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head, and sample vessels must be tailored to the application and ordered separately.</p><p>The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.<br/> </p>
    • PCS
    • 1
    • 856 Conductivity Module
    • 2.856.0010
    • Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
    • <p>Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. <br/><br/>The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.<br/>For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.</p>
    • PCS
    • 1
    • 905 Titrando
    • 2.905.0020
    • High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing systems. up to four dosing systems of the 800 Dosino type; dynamic (DET), monotonic (MET), and endpoint titration (SET); Measurement with ion-selective electrodes (MEAS CONC); Dosing functions with monitoring, Liquid Handling; four MSB connectors for additional stirrers or dosing systems; "iTrode" intelligent electrodes; USB connector; For use with OMNIS Software, tiamo software, or Touch Control unit; Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required;  
    • <p>High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing systems.<br/> </p><ul><li>up to four dosing systems of the 800 Dosino type</li><li>dynamic (DET), monotonic (MET), and endpoint titration (SET)</li><li>Measurement with ion-selective electrodes (MEAS CONC)</li><li>Dosing functions with monitoring, Liquid Handling</li><li>four MSB connectors for additional stirrers or dosing systems</li><li>"iTrode" intelligent electrodes</li><li>USB connector</li><li>For use with OMNIS Software, <em>tiamo</em> software, or Touch Control unit</li><li>Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required</li></ul><p> </p>
    • PCS
    • 1
    • Aquatrode Plus with Pt1000
    • 6.0257.600
    • Combined pH electrode with integrated Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. The fixed ground-joint diaphragm is insensitive to contamination. When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)), storage in the used bridge electrolyte.
    • <p>Combined pH electrode with integrated Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples. <br/><br/>The fixed ground-joint diaphragm is insensitive to contamination. <br/>When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.<br/>The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO<sub>3</sub>) = 1 mol/L (6.2310.010)), storage in the used bridge electrolyte.</p>
    • PCS
    • 1
    • Combined polymer membrane electrode, Ca
    • 6.0510.100
    • Combined calcium-selective electrode with polymer membrane.This ISE is suitable for: ion measurements of Ca2+ (5*10-7 to 1 mol/L) in aqueous solutions; complexometric (back) titrations (e.g., determination of water hardness) ; Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.The reference electrolyte used is c(NH4NO3) = 1 mol/L.
    • <p>Combined calcium-selective electrode with polymer membrane.<br/>This ISE is suitable for:<br/> </p><ul><li>ion measurements of Ca<sup>2+</sup> (5*10<sup>-7</sup> to 1 mol/L) in aqueous solutions</li><li>complexometric (back) titrations (e.g., determination of water hardness)<br/> </li></ul><p>Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.<br/>The reference electrolyte used is c(NH<sub>4</sub>NO<sub>3</sub>) = 1 mol/L.</p>
    • PCS
    • 1
    • OMNIS Software storage device
    • 6.06000.000
    • License-based PC program for controlling complex OMNIS analysis systems. Sample-oriented operating procedures with numerous templates; Graphical method editor with numerous templates; Clearly organized and professional sample lists; Management of instruments, work systems, sensors, solutions; Dialog languages: German, English, Chinese;   
    • <p>License-based PC program for controlling complex OMNIS analysis systems. </p><ul><li>Sample-oriented operating procedures with numerous templates</li><li>Graphical method editor with numerous templates</li><li>Clearly organized and professional sample lists</li><li>Management of instruments, work systems, sensors, solutions</li><li>Dialog languages: German, English, Chinese</li></ul><p> </p><p> </p>
    • PCS
    • 1
    • OMNIS Stand-Alone: 1 instrument license
    • 6.06002.010
    • 1 instrument license for operating one additional OMNIS instrument in OMNIS Stand-Alone.The following instruments are supported:OMNIS instruments; Metrohm USB devices; RS-232 instruments (e.g., balance);   
    • <p>1 instrument license for operating one additional OMNIS instrument in OMNIS Stand-Alone.<br/><br/>The following instruments are supported:</p><ul><li>OMNIS instruments</li><li>Metrohm USB devices</li><li>RS-232 instruments (e.g., balance)</li></ul><p> </p><p> </p>
    • PCS
    • 1
    • OMNIS stand-alone license with 2 instrument licenses
    • 6.06003.012
    • Enables stand-alone operation of the OMNIS Software on a Windows™ computer.Features:The license already includes two OMNIS instrument licenses.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;
    • <p>Enables stand-alone operation of the OMNIS Software on a Windows™ computer.</p><p>Features:</p><ul><li>The license already includes two OMNIS instrument licenses.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul>
    • PCS
    • 1
    • 5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable 2 m)
    • 6.0920.100
    • 5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable (2.0 m) for connecting to an 856 Conductivity Module in combination with a sample changer.This sensor is suitable for automated measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;  
    • <p>5-ring conductivity measuring cell with cell constant c = 0.7 cm<sup>-1 </sup>(guide value), with integrated Pt1000 temperature sensor and fixed cable (2.0 m) for connecting to an 856 Conductivity Module in combination with a sample changer.<br />This sensor is suitable for automated measurements of medium conductivities (5 &micro;S/cm to 20 mS/cm), e.g., in:</p><ul><li>drinking water</li><li>surface water</li><li>wastewater</li></ul><p>&nbsp;</p>
    • PCS
    • 1
    • Titration vessel lid automation
    • 6.1414.080
    • Titration vessel lid for external use with the 6.1415.250 titration vessel base in automation.
    • <p>Titration vessel lid for external use with the 6.1415.250 titration vessel base in automation.</p>
    • PCS
    • 1
    • Sample beaker, plastic (PP), 120 mL, 250 pieces 
    • 6.1459.300
    • Sample beaker, plastic (polypropylene, PP), 120 mL, suitable for sample racks: 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030, and 6.9920.141, 250 pieces 
    • <p>Sample beaker, plastic (polypropylene, PP), 120 mL, suitable for sample racks: 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030, and 6.9920.141, 250 pieces<br/> </p>
    • PCS
    • 1
    • Tubing adapter olive / M8 outer
    • 6.1808.050
    • 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
    • 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
    • PCS
    • 2
    • Spiral band 0.5 m
    • 6.1815.010
    • For holding together different cables or tubing.
    • For holding together different cables or tubing.
    • PCS
    • 1
    • Tube
    • 6.1819.020
    • For M6 threaded holes. For 6.1602.1XX bottle attachments
    • For M6 threaded holes. For 6.1602.1XX bottle attachments
    • PCS
    • 1
    • Support stand for Sample Processors
    • 6.2001.070
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • Support stand for Sample Processors, for external titrations and dilutions (IC)
    • PCS
    • 1
    • Sample rack, 59 x 120 mL, (PVC)
    • 6.2041.840
    • Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 59 sample beakers. The following sample beakers can be used: 6.1459.300, 6.1459.307.Plastic: Polyvinyl chloride (PVC)
    • <p>Sample rack for 815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler "Basic", suitable for 59 sample beakers. The following sample beakers can be used: 6.1459.300, 6.1459.307.</p><p>Plastic: Polyvinyl chloride (PVC)</p>
    • PCS
    • 1
    • Bottle holder for Dosinos
    • 6.2061.010
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • PCS
    • 1
    • Electrode cable / 1 m / F
    • 6.2104.020
    • For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
    • For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
    • PCS
    • 1
    • Buffer solution pH 4 (500 mL)
    • 6.2307.100
    • Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
    • Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal
    • PCS
    • 1
    • Buffer solution pH 7 (500 mL)
    • 6.2307.110
    • Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
    • Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal
    • PCS
    • 1
    • Buffer solution pH 9 (500 mL)
    • 6.2307.120
    • Ready-to-use buffer solution pH = 9 (25 °C), colorless, with closure seal
    • Ready-to-use buffer solution pH =&nbsp;9 (25 °C), colorless, with closure seal
    • PCS
    • 1
    • Conductivity standard 100 µS/cm 250 mL
    • 6.2324.010
    • Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
    • Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
    • PCS
    • 1
    • pHit kit
    • 6.2325.000
    • Maintenance kit for pH electrodes The kit contains:50 mL cleaning solution; 50 mL 3M KCl solution; 50 mL storage solution; 2 Storage vessels; Instructions for use;
    • <p>Maintenance kit for pH electrodes </p><p>The kit contains:</p><ul><li>50 mL cleaning solution</li><li>50 mL&nbsp;3M KCl solution</li><li>50 mL&nbsp;storage solution</li><li>2 Storage vessels</li><li>Instructions for use</li></ul>
    • PCS
    • 1
    • Electrolyte NH4NO3 1 mol/L (50 mL)
    • 6.2327.000
    • Electrolyte solution c(NH4NO3) =1 mol/L (for combined Ca-ISE 6.0510.100)
    • Electrolyte solution c(NH<SUB>4</SUB>NO<SUB>3</SUB>) =1 mol/L (for combined Ca-ISE 6.0510.100)
    • PCS
    • 1
    • Screw nipple
    • 6.2730.080
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer
    • PCS
    • 1
    • Wrench
    • 6.2739.000
    • For tightening connectors
    • For tightening connectors
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • 807 Dosing Unit 20 mL
    • 6.3032.220
    • 807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 2
    • Overflow buret (100 mL) for Sample Processor
    • 6.9958.007
    • Overflow buret for rapid and automatic measuring of 100 mL of sample and for sample transfer into an external titration vessel.
    • <p>Overflow buret for rapid and automatic measuring of 100 mL of sample and for sample transfer into an external titration vessel.</p>
    • PCS
    • 1
    • OMNIS Stand-Alone license
    • 6.06003.010
    • Enables stand-alone operation of the OMNIS software on a Windows™ computer.Features:The license already includes one OMNIS instrument license.; Must be activated via the Metrohm licensing portal.; Not transferable to another computer.;  
    • <p>Enables stand-alone operation of the OMNIS software on a Windows™ computer.<br/><br/>Features:</p><ul><li>The license already includes one OMNIS instrument license.</li><li>Must be activated via the Metrohm licensing portal.</li><li>Not transferable to another computer.</li></ul><p> </p>
    • PCS
    • 1