μStat-i 400s Potentiostat/Galvanostat/Impedance Analyzer (EIS)
DRP-STAT-I-400S
μStat-i 400s Potentiostat/Galvanostat/Impedance Analyzer (EIS)
en
DRP-STAT-I-400S
Feature overview
μStat-i 400s is a portable Potentiostat/Galvanostat/Impedance Analyzer (EIS) that can be applied for Voltammetric, Amperometric, Potentiometric and EIS measurements. Li-ion Battery powered, it can be easily connected to a PC via USB and wireless.
Tech specs
| Operating modes | Potentiostat ; Potentiostat ; Galvanostat ; EIS |
|---|---|
| PC interface | Wireless; USB |
| Power | Li-ion Battery (2300 mAh) ; USB ; DC charger adaptor compatible (5 V) |
| Potential range in volt | ±4 V |
| Maximum current in Ampère | ±40 mA |
| Number of current ranges | 8 |
| Number of current ranges remarks | ±1 nA to ±10 mA |
| Multichannel instrument | NO |
| Maximum number of channels | 1 |
| Maximum number of WE sharing AUX and REF | 1 |
| Potential accuracy | ±0.2% |
| Current accuracy | ≤0.5 % of current range at 100 nA to 10 mA |
| Potential resolution | 1 mV |
| Current resolution | 0.1 % of current output range |
| Measured potential resolution | 0.012 % of potential range |
| Measured current resolution | 0.025 % of current range (1 pA on lowest current range) |
| External inputs/outputs | Iout, Eout ; 2 Analog inputs ; 1 Analog output ; 2 Digital input/outputs ; TX, RX, RTS signals for RS232 connection |
| Dimensions | 100 x 36 x 132 |
| Weight of the instrument in kg | 0.54 |
Frequency range 1 mHz to 1 MHz
-
- μStat Cable connector for μStat-i 400s and conventional electrodes
- DRP-I-CABSTAT1
- μStat Cable connector for μStat-i 400s and conventional electrodes
- <p> μStat Cable connector for μStat-i 400s and conventional electrodes</p>
- PCS
- 1
-
- μStat Cable connector for μStat-i 400s and conventional electrodes
- DRP-I-CABSTAT1
- μStat Cable connector for μStat-i 400s and conventional electrodes
- <p> μStat Cable connector for μStat-i 400s and conventional electrodes</p>
- PCS
- 1