Du er blevet omdirigeret til din lokale version af den anmodede side
Få et tilbud
864 Robotic Balance Sample Processor TAN/TBN

864 Robotic Balance Sample Processor TAN/TBN

2.864.1130

  • Overblik over funktioner

The Robotic Balance Sample Processor TAN/TBN offers the rapid and convenient preparation and analysis of petrochemical products in a single system.

An aliquot of the sample is fully automatically weighed into the titration beaker and diluted with solvent, after which titration is used to determine the TAN and/or TBN value. After analysis, the titration beaker is emptied and the electrode is cleaned and conditioned. Traceability is ensured by the direct preparation on the Balance Sample Processor and the danger of mixing up externally prepared samples is eliminated.

The entire system is monitored with the proven titration and control software tiamo™, the database of which documents each preparation step (including sample size) and the titration results, clearly and separately for each sample.
 

Dette produkt er udgået, men understøttes stadig

Få mere at vide 864 Robotic Balance Sample Processor TAN/TBN

Manual 864 Robotic Balance Sample Processor

Manual 864 Robotic Balance Sample Processor

English
EU declaration of conformity 864 Robotic Balance Sample Processor

EU declaration of conformity 864 Robotic Balance Sample Processor

English

Automatisering til Titrando

Fleksible og udvidelige automatiseringsmuligheder lige fra væskehåndtering til homogenisering og direkte måling.

Hvorfor? Automatisering til Titrando?

Udstyr Din 864 Robotic Balance Sample Processor TAN/TBNdownload Download PDF med tilbehør
  • Inkluderede dele
  • Valgfrie dele
Solvotrode easyClean (fixed cable 2.0 m)
Solvotrode easyClean (fixed cable 2.0 m)
6.0229.020
Combined pH electrode with flexible easyClean diaphragm and fixed cable (2.0 m) for all automated, non-aqueous acid/base titrations. The glass membrane is optimized for poorly conducting solutions, and thanks to the easy-to-clean easyClean diaphragm, the electrode is well suited for heavily contaminated samples, such as used oil. This electrode can be used with non-aqueous reference electrolytes (lithium chloride or tetraethylammonium bromide). Storage in the respective reference electrolyte.
Sleeve with SGJ 14/12 mm
Sleeve with SGJ 14/12 mm
6.1236.020
Sleeve with SGJ 14/12 mm and O-ring.
Titration Head, 3 x SGJ 14
Titration Head, 3 x SGJ 14
6.1458.040
Titration head for 120 mL beakers. With 3 openings SGJ 14 and 4 openings 6.4 mm, 2 dosing tips included. Suitable for rinsing and aspiration equipment.
Sample beaker, plastic (PP), 120 mL, 250 pieces 
Sample beaker, plastic (PP), 120 mL, 250 pieces 
6.1459.300
Sample beaker, plastic (polypropylene, PP), 120 mL, suitable for sample racks: 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030, and 6.9920.141, 250 pieces 
Vis mere