Pharm Titrando

Pharm Titrando
Katalogové číslo: 2.907.1020

The Pharm Titrando is based on the 907 Titrando and offers a complete package for the most common analyses of pharmaceutical products. Apart from the titration software tiamoTM full and determination methods described in detail, you will also receive comprehensive accessories for your titrations.

  • Dokumenty
  • Součástky

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení

  • iAquatrode plus with Pt1000
    6.0277.300
    iAquatrode plus with Pt1000

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples.

    The fixed ground-joint diaphragm is insensitive to contamination.
    When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.
    The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

    1 piece(s)

  • iSolvotrode
    6.0279.300
    iSolvotrode

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data for all non-aqueous acid/base titrations.
    The glass membrane is optimized for poorly conducting solutions, and thanks to the flexible ground-joint diaphragm, the electrode is well suited for contaminated samples. This electrode can be used with non-aqueous reference electrolytes (lithium chloride or tetraethylammonium bromide). Storage in the respective reference electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

    1 piece(s)

  • iAg Titrode
    6.0470.300
    iAg Titrode

    Intelligent, combined silver ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for precipitation titrations when the pH value remains constant (titrant silver nitrate) of, e.g.:
     

    • chloride, bromide, iodide
    • sulfides
    • hydrogen sulfide
    • mercaptans
    • cyanides


    This electrode is stored in deion. water.

    Depending on the application, we recommend using an Ag Titrode with a coating (AgBr or Ag2S coating), which can be ordered accordingly.

    1 piece(s)

  • iPt Titrode
    6.0471.300
    iPt Titrode

    Combined platinum ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for redox titrations when the pH value remains constant, e.g.:
     

    • iodometry
    • chromatometry
    • cerimetry
    • permanganometry


    This electrode is stored in deion. water.

    1 piece(s)

  • Optrode
    6.1115.000
    Optrode

    Optical sensor for photometric titrations offering 8 different wavelengths.
    Switching of the wavelength can be done via software (tiamo 2.5 or higher) or with a magnet.
    The glass shaft is completely solvent-resistant and easy to clean.
    This space-saving sensor is suitable, e.g.:

    • for non-aqueous titrations in accordance with USP or EP
    • for determination of carboxyl end groups
    • for TAN/TBN in accordance with ASTM D974
    • for sulfate determination
    • Fe, Al, Ca in cement
    • water hardness
    • Chondroitin sulfate in accordance with USP

    1 piece(s)

  • Extractor rod
    6.1546.030
    Extractor rod
    For PTFE piston of dosing unit

    1 piece(s)

  • Amber glass bottle / 1000 mL / GL 45
    6.1608.023
    Amber glass bottle / 1000 mL / GL 45
    For Exchange Units. Bottle for auxiliary solutions.

    2 piece(s)

  • Stirring propeller / 96 mm
    6.1909.010
    Stirring propeller / 96 mm
    Propeller stirrer, length from lower edge of SGJ: 96 mm. For use with beakers with 722, 802 Rod Stirrer

    1 piece(s)

  • Support stand without support rod
    6.2001.060
    Support stand without support rod
    To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.

    1 piece(s)

  • Clamping ring
    6.2013.010
    Clamping ring

    For support rods with a diameter of 10 mm.


    1 piece(s)

  • Support rod / 400 mm
    6.2016.070
    Support rod / 400 mm

    1 piece(s)

  • Electrode holder
    6.2021.020
    Electrode holder
    Electrode holder for 4 electrodes and 2 buret tips

    1 piece(s)

  • Holding clip for bottles
    6.2043.005
    Holding clip for bottles

    Holding spring for reagent bottles in exchange units.


    2 piece(s)

  • Adapter red  2 mm plug / 4 mm socket
    6.2103.130
    Adapter red 2 mm plug / 4 mm socket
    For connecting plug B (4 mm) to 2 mm socket.

    2 piece(s)

  • Adapter black 2 mm plug / B socket 4 mm
    6.2103.140
    Adapter black 2 mm plug / B socket 4 mm
    For connecting plug B (4 mm) to 2 mm socket.

    2 piece(s)

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Buffer solutions pH 4, 7 and 9
    6.2307.230
    Buffer solutions pH 4, 7 and 9
    Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL

    1 piece(s)

  • Electrolyte  3 mol/L KCl (50 mL)
    6.2308.050
    Electrolyte 3 mol/L KCl (50 mL)
    Electrolyte solution c(KCl) = 3 mol/L (for Ag/AgCl reference systems)

    1 piece(s)

  • TEABr 0.4 mol/L in ethylene glycol (250 mL)
    6.2320.000
    TEABr 0.4 mol/L in ethylene glycol (250 mL)
    Electrolyte solution TEABr (tetraethylammonium bromide in ethylene glycol), c(TEABr) = 0.4 mol/L

    1 piece(s)

  • Storage solution
    6.2323.000
    Storage solution
    Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L

    1 piece(s)

  • 
    5 mm hex key for IC Sample Processors
    6.2621.070
    5 mm hex key for IC Sample Processors

    1 piece(s)

  • Hexagon key 2 mm
    6.2621.130
    Hexagon key 2 mm
    2 mm.

    1 piece(s)

  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    2 piece(s)

  • Tiamo 2.5 Full CD: 1 license
    6.6056.252
    Tiamo 2.5 Full CD: 1 license

    Computer program for controlling complex titration systems.

    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • Export to LIMS, NuGenesis, Cyberlab, etc.
    • High-performance report generator
    • In compliance with the directives according to FDA 21 CFR Part 11
    • Parallel titration
    • Dialog languages: German, English, French, Italian, Spanish, Portuguese, Polish, Russian, Slovakian, Czech, Japanese, Chinese and Traditional Chinese

     

    1 piece(s)