Rádi bychom pro Vás udělali tyto nastavení

Naše webové stránky používají cookies, aby Vám nabídli nejlepší možný zážitek z prohlížení webu. Kliknutím na tlačítko OK budete souhlasit s cookies.

Privacy Policy
Ok
Česká republika
CS
Metrohm Agencies Login

Tento produkt byl stažen z výroby, ale je stále podporován.

« Přejít na novou generaci produktu
OMNIS - OBJEVTE NOVOU ÉRU V TITRACI > ČTĚTE VÍCE

797 VA Computrace for trace analysis

797 VA Computrace for trace analysis
Katalogové číslo: 2.797.0010

The 797 VA Computrace is a modern voltammetric measuring stand that is connected to a PC via a USB port. The computer software provided controls the measurement, records the measured data and evaluates it. Operation is most straightforward due to the well-laid-out structure of the program. The integrated potentiostat with galvanostat guarantees the highest sensitivity with reduced noise.

Voltammetry system for trace analysis and education. Complete accessories with VA Computrace software and all electrodes for a complete measurement system: Multi-Mode Electrode pro (MME pro), Ag/AgCl reference electrode and Pt auxiliary electrode.

  • Technické specifikace
  • Dokumenty
  • Součástky
  • Možnosti
Dimensions in mm (W/H/D) 258/245/535
Dimensions remark Height with covering folded open: 630 mm

Potentiostat

  • Max. output voltage: ±5 V
  • Max. output current: ±80 mA
  • Voltage feed: <1 mV/s - 35 V/s at 10 mV resolution


Current measurement techniques

  • DC, DP, SqW, AC1, AC2, NP, CV, PSA, CC-PSA, CVS, CPVS


Working electrode

  • Multi-Mode Electrode (MME), can be operated as DME, SMDE or HMDE
  • Rotating disk electrodes (RDE) made of GC, "Ultra Trace" graphite, Pt, Ag, Au


Reference electrode

  • Ag/AgCl/KCl 3 mol/L


Auxiliary electrode

  • Pt
  • Glassy Carbon (GC) as option


Stirrer

  • PTFE, 200 to 3,000 min-1


Interfaces

  • Built-in USB interface
  • MSB interfaces for connecting up to 3 Dosinos or Dosimats
  • Remote interface for the connection of peripheral devices


Software

  • 797 VA Computrace Software 1.3


Data evaluation

  • Peak height (entire peak, front half of peak, rear half of peak)
  • Peak area
  • Charge
  • First derivative


Baseline types

  • Linear
  • Polynomial
  • Exponential
  • Horizontal


Concentration determination

  • Standard addition
  • Calibration curve technique (linear or nonlinear regression)
  • Dilution Titration (DT)
  • Linear Approximation Technique (LAT)
  • Modified Linear Approximation Technique (MLAT)
  • Response Curve Technique (RC)
  • 8.797.5003
    Brochure: 797 VA Computrace – The all-round instrument for voltammetry (english)
    PDF
    Ostatní jazyky
    • Brochure: 797 VA Computrace – The all-round instrument for voltammetry (中文)
      PDF
    • Brochure: 797 VA Computrace – The all-round instrument for voltammetry (deutsch)
      PDF
    • Brochure: 797 VA Computrace – The all-round instrument for voltammetry (español)
      PDF
  • 8.000.5054
    Brochure: Mercury Handling Guidelines (english)
    PDF
    Ostatní jazyky
    • Brochure: Mercury Handling Guidelines (deutsch)
      PDF
    • Brochure: Mercury Handling Guidelines (español)
      PDF
  • 8.000.5022
    Brochure: RoHS analysis (english)
    PDF
    Ostatní jazyky
    • Brochure: RoHS analysis (deutsch)
      PDF
    • Brochure: RoHS analysis (español)
      PDF
  • 8.797.3001
    Declaration of conformity 797 VA Computrace (english)
    PDF
    Ostatní jazyky
    • Declaration of conformity 797 VA Computrace (中文)
      PDF
    • Declaration of conformity 797 VA Computrace (français)
      PDF
    • Declaration of conformity 797 VA Computrace (deutsch)
      PDF
    • Declaration of conformity 797 VA Computrace (日本語)
      PDF
    • Declaration of conformity 797 VA Computrace (português)
      PDF
    • Declaration of conformity 797 VA Computrace (español)
      PDF
  • 8.797.0923
    Declaration of conformity for 797 VA Computrace Software 1.2, English (english)
    PDF
  • 8.797.0933
    Declaration of conformity for 797 VA Computrace Software 1.3, English (english)
    PDF
  • 8.797.0903
    EU declaration of conformity for 797 VA Computrace Software 1.0 (english)
    PDF
  • 8.797.8002
    Instructions for Use: 797 VA Computrace Software 1.3.x (english)
    PDF
    Ostatní jazyky
    • Instructions for Use: 797 VA Computrace Software 1.3.x (deutsch)
      PDF
  • 8.797.8001
    Manual: 797 VA Computrace Hardware (english)
    PDF
    Ostatní jazyky
    • Manual: 797 VA Computrace Hardware (deutsch)
      PDF
  • 8.018.5003
    Monograph Sample Preparation Techniques in Voltammetric Trace Analysis (English) (english)
    PDF
  • 8.038.5003
    Monograph: Analysis of water samples and water constituents with Metrohm instruments (English) (english)
    PDF
  • 8.005.5003
    Monograph: Stripping Voltammetry (english)
    PDF
  • 81085002
    Voltammetric analysis methods in electroplating (english)
    PDF
    Ostatní jazyky
    • Voltammetric analysis methods in electroplating (deutsch)
      PDF
Kompletní rozsah dodávky a doplňkové příslušenství ke stažení
Separate Pt Rod Electrode

Separate Pt Rod Electrode

6.0343.000

Platinum auxiliary electrode for voltammetry and CVS.

1 piece(s)

Ag/AgCl reference electrode

Ag/AgCl reference electrode

6.0728.020

Inner reference system with electrolyte c(KCl) = 3 mol/L. For use with electrolyte vessel made of plastic 6.1245.010.

1 piece(s)

Stirrer for VA Stand

Stirrer for VA Stand

6.1204.200
Stirrer for VA Stand, complete, metal-free

1 piece(s)

Mercury drop capillary (non-silanized) for MME

Mercury drop capillary (non-silanized) for MME

6.1226.030


Non-silanized mercury drop capillary (10 pieces)


1 piece(s)

Mercury drop capillary (silanized) for MME

Mercury drop capillary (silanized) for MME

6.1226.050


Silanized mercury drop capillary (10 pieces)


1 piece(s)

Driving belt

Driving belt

6.1244.020
For Rotating Disk Electrodes and stirrer in VA Stands (3 pieces).

1 piece(s)

Electrolyte vessel made of plastic

Electrolyte vessel made of plastic

6.1245.010

Electrolyte vessel made of plastic with ceramic diaphragm for double junction reference electrode.

1 piece(s)

Multi-Mode Electrode pro

Multi-Mode Electrode pro

6.1246.120
Mercury electrode for voltammetry. Can be operated as DME, SMDE or HMDE.

1 piece(s)

Needles for MME

Needles for MME

6.1247.020

Needles for Multi Mode Electrode (3 pieces).

1 piece(s)

Titration vessel / 10-90 mL

Titration vessel / 10-90 mL

6.1415.210

1 piece(s)

Threaded stopper / M6

Threaded stopper / M6

6.1446.040

7 piece(s)

Tubing for nitrogen connection

Tubing for nitrogen connection

6.1801.080
For supplying gas to voltammetry instruments

1 piece(s)

Connection bushing M6

Connection bushing M6

6.1808.000

4 piece(s)

Four-way micro dosing tip

Four-way micro dosing tip

6.1824.000

With 4 x M6 thread. For VA measuring stands.


1 piece(s)

Cable USB A - USB B 1.8 m

Cable USB A - USB B 1.8 m

6.2151.020
USB connecting cable

1 piece(s)

Pb Ion standard 1 g/L 50 mL

Pb Ion standard 1 g/L 50 mL

6.2301.100
Pb ion standard, c(Pb2+ ) = 1.000 g/L

1 piece(s)

Electrolyte 3 mol/L KCl (250 mL)

Electrolyte 3 mol/L KCl (250 mL)

6.2308.020
Electrolyte solution c(KCl) = 3 mol/L, (for Ag/AgCl reference systems)

1 piece(s)

Mercury drop catcher

Mercury drop catcher

6.2406.000
Silver wire (to capture mercury drops by amalgamation)

1 piece(s)

Stand ring for titration vessels

Stand ring for titration vessels

6.2703.000

1 piece(s)

Stopper for pipetting opening

Stopper for pipetting opening

6.2709.080
For 694, 747 VA Stands and VA Computrace

1 piece(s)

Tray for filling the MME

Tray for filling the MME

6.2711.030

For 884 Professional VA, 797 VA Computrace, 757 VA Computrace and 647, 663, 694, 747 VA Stands

1 piece(s)

Drip pan for VA Computrace

Drip pan for VA Computrace

6.2711.040

1 piece(s)

Wrench

Wrench

6.2739.000
For tightening connectors

1 piece(s)

Syringe 10 mL with Luer connection

Syringe 10 mL with Luer connection

6.2816.020
For various applications in IC and VA

1 piece(s)

Needle with Luer connector

Needle with Luer connector

6.2816.030

Needle for filling in mercury into the Multi-Mode Electrode and for sample addition in Karl Fischer titration.


 


1 piece(s)

797 VA Computrace Software CD 1.3

797 VA Computrace Software CD 1.3

6.6053.030

Control and evaluation software for 797 VA Computrace. For the following operating systems: Windows
® 2000, Windows
® XP Professional, Windows
® Vista (32-bit) and Windows
® 7 (32-bit).


1 piece(s)

Kompletní rozsah dodávky a doplňkové příslušenství ke stažení
800 Dosino

800 Dosino

2.800.0010

Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
805 Dosimat

805 Dosimat

2.805.0010
Dosing device for the Titrando and Sample Processors with read/write hardware for intelligent Exchange Units. With permanently attached cable. Without Exchange Unit.
843 VA Membrane Pump Station for Compact VA systems

843 VA Membrane Pump Station for Compact VA systems

2.843.0040

The 843 Membrane Pump Station has two built-in membrane pumps that can be controlled directly by the 797 VA Computrace via the remote signal. It is used for the automatic rinsing and emptying of the measuring vessel in partly automated and fully automated VA and CVS systems with the 797 VA Computrace.

The version for voltammetry is equipped with the complete accessories for the automatic rinsing and emptying of the measuring vessel.
843 VA Peristaltic Pump Station for Compact VA systems

843 VA Peristaltic Pump Station for Compact VA systems

2.843.0140

The 843 Peristaltic Pump Station has two built-in peristaltic pumps that can be controlled directly by the 797 VA Computrace via the remote signal. It is used for the automatic rinsing and emptying of the measuring vessel in partly automated and fully automated VA and CVS systems with the 797 VA Computrace.

The version for voltammetry is equipped with the complete accessories for the automatic rinsing and emptying of the measuring vessel.
846 Dosing Interface

846 Dosing Interface

2.846.0010

USB-capable control unit for connecting a maximum of four 800 Dosinos or 805 Dosimats for dosing and Liquid Handling tasks. A Touch Control or the connection to a PC with tiamo™, MagIC Net, viva or 797 VA Computrace is required for operation.
863 Compact VA Autosampler

863 Compact VA Autosampler

2.863.0020

The 863 Compact VA Autosampler is a space-saving and inexpensive Autosampler for the simple automation of VA systems in voltammetric trace analysis with the 797 VA Computrace. It enables the determination of small series with a maximum of 18 similar samples 5 to 11 mL in size with great accuracy.

With integrated peristaltic pump for sample transfer. The instrument is supplied together with built-in sample rack, extensive accessories and connecting cable for a complete workplace setup.
Ag/AgCl reference electrode without electrolyte

Ag/AgCl reference electrode without electrolyte

6.0728.000

Inner reference system without electrolyte for use with electrolyte vessel made of glass 6.1245.000.
Ag/AgCl reference electrode without electrolyte

Ag/AgCl reference electrode without electrolyte

6.0728.010

Inner reference system without electrolyte for use with electrolyte vessel made of plastic 6.1245.010.
Complete LL-Ag/AgCl(gel) reference electrode

Complete LL-Ag/AgCl(gel) reference electrode

6.0730.000

Maintenance-free Double-Junction Ag/AgCl reference electrode for voltammetry. Made of glass with electrolyte c(KCl) = 3 mol/L (gel), for pH 0 - 8. Suitable for use in continuous operation in automated systems and online instruments.
Silver Electrode Tip

Silver Electrode Tip

6.1204.130

Metal electrode tip, silver (Ag). Electrode disk diameter 2 mm. M3 thread. Temperature range: 0 ... 40 °C.
Gold Electrode Tip

Gold Electrode Tip

6.1204.140

Metal electrode tip, gold (Au). Electrode disk diameter 2 mm. M3 thread. Temperature range: 0 ... 40 °C.
Lateral Gold Electrode Tip

Lateral Gold Electrode Tip

6.1204.150

Metal electrode tip, gold (Au), with lateral electrode surface. Electrode disk diameter 3 mm. M3 thread. Temperature range: 0 ... 40 °C.
3 mm platinum electrode tip for CVS

3 mm platinum electrode tip for CVS

6.1204.170

Metal electrode tip made of platinum (Pt), diameter of electrode disk 3 mm, polished surface, M3 thread connection. Temperature range: 0 - 40 °C.
Ultra Trace electrode tip

Ultra Trace electrode tip

6.1204.180


Carbon electrode tip from Ultra Trace graphite. Electrode disk diameter 2 mm. M3 thread connection. Temperature range: 0 - 40 °C.
1 mm platinum electrode tip for CVS

1 mm platinum electrode tip for CVS

6.1204.190

Metal electrode tip made of platinum (Pt), diameter of electrode disk 1 mm ±0.02 mm, polished surface, shaft made of glass, M3 thread connection. Concentricity error: < 0.2 mm. Temperature range: 0 - 50 °C.
Driving axle for rotating disk electrode (RDE)

Driving axle for rotating disk electrode (RDE)

6.1204.210

Driving axle for rotating disk electrode (RDE) with titanium axle for VA measuring stands, M3 thread.
Driving axle for rotating disk electrode (RDE) with mercury contact

Driving axle for rotating disk electrode (RDE) with mercury contact

6.1204.220

Driving axle for rotating disk electrode (RDE) with titanium axle and mercury contact for VA measuring stands, M3 thread.
Glassy carbon electrode tip, shaft made of glass.  

Glassy carbon electrode tip, shaft made of glass.  

6.1204.600


Carbon electrode tip made of Glassy-Carbon (GC). Diameter of electrode disk 2 mm ±0.1 mm, polished surface, shaft made of glass, M3 thread connection, concentricity deviation: <0.25 mm. Temperature range: 0 - 50°C. 
2 mm platinum electrode tip for CVS

2 mm platinum electrode tip for CVS

6.1204.610

Metal electrode tip made of platinum (Pt), diameter of electrode disk 2 mm ±0.05 mm, polished surface, shaft made of glass, M3 thread connection. Concentricity error: < 0.3 mm. Temperature range: 0 - 50 °C.
Electrode holder

Electrode holder

6.1241.020

Electrode holder for VA auxiliary electrodes. For use with glassy carbon rod (6.1247.000) or platinum pin (6.1247.010).
Electrolyte vessel made of glass

Electrolyte vessel made of glass

6.1245.000

Electrolyte vessel made of glass with ground-joint diaphragm (standard ground-joint) for double junction reference electrode.
Glassy carbon rod (GC)

Glassy carbon rod (GC)

6.1247.000

For electrode holder 6.1241.020 or 6.1241.120 for VA auxiliary electrode.
Titration vessel / 5-70 mL

Titration vessel / 5-70 mL

6.1415.150
Titration vessel / 20-90 mL

Titration vessel / 20-90 mL

6.1415.220
Titration vessel / 50-150 mL

Titration vessel / 50-150 mL

6.1415.250
Titration vessel / 70-200 mL

Titration vessel / 70-200 mL

6.1415.310
Titration vessel with thermostat jacket / 5-70 mL

Titration vessel with thermostat jacket / 5-70 mL

6.1418.150
Titration vessel with thermostat jacket / 20-90 mL

Titration vessel with thermostat jacket / 20-90 mL

6.1418.220
Titration vessel with thermostat jacket / 50-150 mL

Titration vessel with thermostat jacket / 50-150 mL

6.1418.250
PFA titration vessel / 10 to 90 mL

PFA titration vessel / 10 to 90 mL

6.1450.210
For ultratrace analysis and for solutions containing fluoride.
Gaskets / 5 pieces

Gaskets / 5 pieces

6.1454.020
Measuring vessel / 10-90 mL

Measuring vessel / 10-90 mL

6.1456.210
Measuring vessel for automated VA systems. Dilution vessel for Advanced IC Sample Processor
Cable 797 VA Computrace to 813 Compact Sample Changer to 731 Relay Box

Cable 797 VA Computrace to 813 Compact Sample Changer to 731 Relay Box

6.2141.170
Stopper for MME opening on VA Stand

Stopper for MME opening on VA Stand

6.2709.040
For closing gas tubing of the Multi-Mode Electrode in VA Stands if not in use. E.301.0004 O-rings included.
Stopper for stirrer opening on VA Stand

Stopper for stirrer opening on VA Stand

6.2709.050
E.301.0004 O-rings included. Used for the stirrer opening of VA Stands.
Stopper

Stopper

6.2730.030

Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.
MVA-Hg, equipment for mercury determination

MVA-Hg, equipment for mercury determination

6.5327.000
Complete set of accessories for the determination of mercury as per Application Bulletin 96. Contains rotating gold working electrode, reference electrode, glassy-carbon auxiliary electrode and other accessories.
MVA-CVS, equipment for the CVS for 797 VA Computrace

MVA-CVS, equipment for the CVS for 797 VA Computrace

6.5327.020
Complete accessories set for the determination of organic additives in electroplating baths with CVS (Cyclic Voltammetric Stripping). Contains rotating platinum working electrode, reference electrode, platinum auxiliary electrode and additional accessories.

Metrohm Newsletter

Registrujte se teď!

Aplikační novinky, praktické tipy pro laboratoře a další.

Novinky

6. 6. 2018

Automatizace pro několik sériových Karl Fischer titrací

 Více novinek

Události

28. 8. 2019 - 30. 8. 2019

3rd Global User Meeting IC

 Více událostí

© Metrohm Česká republika 2010 - 2019

Kontakt

Legal Notice

Profil společnosti

Privacy Policy