Power Pack Cation IC


    Power Pack Cation IC
Beställningsnummer: 2.850.8210

Complete system for
cation analysis by means of IC, including automated sample preparation (Inline Sample Preconcentration and Matrix Elimination ).


  • Ingående delar och tillbehör

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • 
    Metrosep C PCC 1 HC/4.0
    6.1010.310
    Metrosep C PCC 1 HC/4.0
    For cation preconcentration and matrix elimination

    1 piece(s)

  • Metrosep I Trap 1 - 100/4.0
    6.1014.200
    Metrosep I Trap 1 - 100/4.0


    The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation." Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.


    2 piece(s)

  • Extractor rod
    6.1546.030
    Extractor rod
    For PTFE piston of dosing unit

    2 piece(s)

  • 
            
    Eluent bottle cap GL 45
    6.1602.160
    Eluent bottle cap GL 45
    For eluent bottles, with connectors for the adsorber tube and the aspiration tubing.

    2 piece(s)

  • Attachment 5 x UNF 10/32 for «Waste Collector»
    6.1602.210
    Attachment 5 x UNF 10/32 for «Waste Collector»

    Attachment for holding up to 5 waste capillaries.

    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    2 piece(s)

  • Bottle / 300 mL
    6.1608.080
    Bottle / 300 mL

    Rinsing vessel for IC Sample Processors.

    3 piece(s)

  • PE bottle 50 mL
    6.1608.100
    PE bottle 50 mL

    Bottle for Extension Module Liquid Handling.


    20 piece(s)

  • Adsorbing tube, large and bent
    6.1609.000
    Adsorbing tube, large and bent
    For filling with adsorber material.

    2 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    2 piece(s)

  • PTFE capillary 0.5 mm i.d. / 1 m
    6.1803.040
    PTFE capillary 0.5 mm i.d. / 1 m
    Capillary for sample handling in IC.

    1 piece(s)

  • Y-connector for tubing 6-9 mm i.d.
    6.1807.010
    Y-connector for tubing 6-9 mm i.d.
    Connector for waste tubing

    1 piece(s)

  • Silicone tubing 6 mm i.d., 1 m
    6.1816.020
    Silicone tubing 6 mm i.d., 1 m
    For waste tubing.

    2 piece(s)

  • Silicone tubing 6 mm i.d. /  2 m
    6.1816.080
    Silicone tubing 6 mm i.d. /  2 m


    Drainage tubing to the "Waste Collector".


    1 piece(s)

  • Transfer tubing 10 mL PEEK 1/8 in.
    6.1825.270
    Transfer tubing 10 mL PEEK 1/8 in.

    1 piece(s)

  • PEEK capillary 0.75 mm i.d. / 3 m
    6.1831.030
    PEEK capillary 0.75 mm i.d. / 3 m
    For all IC components.

    1 piece(s)

  • PEEK capillary 0.5 mm i.d., 1 m
    6.1831.060
    PEEK capillary 0.5 mm i.d., 1 m
    For inline dialysis and for Sample Changers. For IC Dialysis Unit, IC Sample Processor, Compact IC Autosampler, IC Filtration Sample Processor, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    2 piece(s)

  • PEEK Capillary 0.5 mm i.d., 3 m
    6.1831.180
    PEEK Capillary 0.5 mm i.d., 3 m

    2 piece(s)

  • Connecting Tubing to 845, 85 cm
    6.1838.010
    Connecting Tubing to 845, 85 cm
    Connection eluent bottle at the eluent Synthesizer - Titrino

    2 piece(s)

  • Clip for SGJ 14/15
    6.2023.020
    Clip for SGJ 14/15
    Clip for SGJ 14/16

    2 piece(s)

  • Holder for Dosino to IC instruments
    6.2057.210
    Holder for Dosino to IC instruments
    Mounting part for Dosinos at the IC instrument housing.

    1 piece(s)

  • 
    Holder to Waste Collector
    6.2057.220
    Holder to Waste Collector

    Holder for fastening the Waste Collector to the IC instrument.


    1 piece(s)

  • Beaker retainer for Advanced IC Sample Processor
    6.2064.000
    Beaker retainer for Advanced IC Sample Processor
    Retaining plate for 838 Advanced Sample Processors. For holding 2.5 or 11 mL vials.

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Cable USB A - USB B  1.8 m
    6.2151.020
    Cable USB A - USB B 1.8 m
    USB connecting cable

    1 piece(s)

  • Colored sleeves for capillaries
    6.2251.000
    Colored sleeves for capillaries
    Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.

    1 piece(s)

  • Tool for piston seal
    6.2617.010
    Tool for piston seal
    For removing and assembling the piston seal for all standard pump heads

    1 piece(s)

  • Adjustable wrench
    6.2621.000
    Adjustable wrench
    Max. opening: 20 mm. For IC instruments

    2 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 1/4 in. wrench
    6.2621.050
    1/4 in. wrench
    For 1/4 in. screws. For IC instruments

    1 piece(s)

  • Capillary cutter
    6.2621.080
    Capillary cutter
    For plastic capillaries. Used with IC instruments

    1 piece(s)

  • 
    3 mm hex key for IC Sample Processors
    6.2621.100
    3 mm hex key for IC Sample Processors

    1 piece(s)

  • Tool set for Advanced IC Sample Processors
    6.2621.300
    Tool set for Advanced IC Sample Processors
    Tool set consisting of open-end wrenches and hexagon keys.

    1 piece(s)

  • Drain nozzle (ProfIC)
    6.2626.000
    Drain nozzle (ProfIC)
    Drain nozzle for Professional IC instruments, for mounting on front panel

    1 piece(s)

  • Wrench
    6.2739.000
    Wrench
    For tightening connectors

    2 piece(s)

  • Stopper for overflow (ProfIC), 5 pieces
    6.2743.080
    Stopper for overflow (ProfIC), 5 pieces
    For Professional IC instruments

    1 piece(s)

  • Pressure screw 5x
    6.2744.010
    Pressure screw 5x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    2 piece(s)

  • Pressure screw 2x
    6.2744.014
    Pressure screw 2x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    3 piece(s)

  • Luer/UNF coupling
    6.2744.020
    Luer/UNF coupling
    For IC instruments

    1 piece(s)

  • 2 x UNF 10/32 coupling
    6.2744.040
    2 x UNF 10/32 coupling
    For connecting 1/16 in. capillaries. For IC instruments

    1 piece(s)

  • Pressure screw short
    6.2744.070
    Pressure screw short
    Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries

    1 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    3 piece(s)

  • Pressure screw long
    6.2744.090
    Pressure screw long
    Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)

    1 piece(s)

  • Tubing adaptor for aspiration filter (ProfIC)
    6.2744.210
    Tubing adaptor for aspiration filter (ProfIC)
    For Professional IC instruments

    1 piece(s)

  • Safety shield
    6.2751.110
    Safety shield


    Safety shield for the Advanced IC/VA Sample Processors.


    1 piece(s)

  • Container with GL 45 drainage to the "Waste Collector"
    6.2765.000
    Container with GL 45 drainage to the "Waste Collector"


    Container with drainage to the "Waste Collector".


    1 piece(s)

  • Syringe 10 mL with Luer connection
    6.2816.020
    Syringe 10 mL with Luer connection
    For various applications in IC and VA

    1 piece(s)

  • Purge tubing
    6.2816.040
    Purge tubing
    With PTFE tubing and Luer connection. For syringes. For aspirating eluents.

    1 piece(s)

  • Aspiration filter
    6.2821.090
    Aspiration filter
    Pore size 20 µm, set of 5 pieces. For 6.1834.000 Aspiration tubing and 6.1821.040 and 6.1821.050 Filter tubes.

    1 piece(s)

  • Spare filter for inline filter
    6.2821.130
    Spare filter for inline filter
    Spare filter for inline filter.

    1 piece(s)

  • 
    Sample needle made of zirconium oxide with PEEK tip
    6.2846.010
    Sample needle made of zirconium oxide with PEEK tip

    Sample needle for Sample Processors and Autosampler in ion chromatography. The PEEK tip guarantees secure piercing of the vial covering.


    1 piece(s)

  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    2 piece(s)

  • 6.9920.191
    Sample rack 3 x 60.6 mm and 35 x 41 mm

    Sample rack for trace analysis in IC.


    1 piece(s)