How to assemble and condition the coulometric KF cell

It is difficult to make a general statement concerning how often the molecular sieve should be replaced, because this is dependent on the humidity in the laboratory. Our experience has shown us that replacement every six weeks is appropriate in the presence of medium humidity. An increase in drift indicates that the leak-tightness of the cell should be inspected and that the molecular sieve should possibly be replaced.

Tip: Write the date on which you have last replaced the molecular sieve on the glass of the drying tube. In this way, you will always know when the next replacement is due.

The molecular sieve can be regenerated at 300 °C in the drying oven. The regeneration time is at least 24 hours. The molecular sieve is then placed in a desiccator for cooling down and afterwards stored in a glass bottle with an airtight seal.

If the drift during pretitration (conditioning) is too high after the addition of fresh working medium, then this is a sign that the titration cell is not protected sufficiently against humidity. Replace the molecular sieve and the septum, also check whether all of the O-rings/PTFE sleeves are in proper working condition (damage, cracking).

If the drift is too high after the completion of a sample titration, then this is usually because of other reasons:

• The sample has not dissolved completely during titration and continues to release water. An increase of the extraction time or other sample pretreatment steps are recommended. Read for more details in the following FAQ: «What to do to improve the release of water?»
• The sample reacts with the KF reagent, a side reaction takes place. Depending on the type of the side reaction, this can be suppressed not only with special reagents, but also by means of appropriate titration methods (KF oven method, titration in the cold, or external extraction).
• The sample has shifted the pH value. Read for more details in the following FAQ: «How can I prevent side reactions or pH value shifts?»