920 Absorber Module


    920 Absorber Module
Artikkelnummer: 2.920.0010

The 920 Absorber Module combines the Combustion Module with the ion chromatograph. The 920 Absorber Module ensures that the gaseous compounds of the analytes are dissolved and channeled to the IC. It is responsible for the entire Liquid Handling. In addition to Combustion IC, it can also be used for gas analysis.


  • Dokumenter
  • Delebetegnelse
  • Tilleggsutstyr

Last ned en komplett deleliste i PDF:

  • Metrosep A Trap 1 - 100/4.0
    6.1014.000
    Metrosep A Trap 1 - 100/4.0

    High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0. Should these anionic contaminants elute at a later time, there will be practically no further noticeable influence on the baseline, due to the enormous peak widening.


    This column is primarily used with gradient applications.


    1 piece(s)

  • Metrosep I Trap 1 - 100/4.0
    6.1014.200
    Metrosep I Trap 1 - 100/4.0


    The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation." Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.


    1 piece(s)

  • Extractor rod
    6.1546.030
    Extractor rod
    For PTFE piston of dosing unit

    2 piece(s)

  • 
    Bottle attachment / GL 45 - 3 x UNF 10/32
    6.1602.150
    Bottle attachment / GL 45 - 3 x UNF 10/32

    For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.


    1 piece(s)

  • Bottle attachment GL 45 for eluents and reagents
    6.1602.160
    Bottle attachment GL 45 for eluents and reagents

    For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.

    2 piece(s)

  • Drying bottle / 100 mL / GL 45
    6.1608.050
    Drying bottle / 100 mL / GL 45

    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    2 piece(s)

  • Adsorbing tube, large and bent
    6.1609.000
    Adsorbing tube, large and bent
    For filling with adsorber material.

    2 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    2 piece(s)

  • PTFE capillary 0.5 mm i.d. / 3 m
    6.1803.030
    PTFE capillary 0.5 mm i.d. / 3 m
    Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    3 piece(s)

  • Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    6.1803.130
    Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    Connecting capillary from the eluent components to the Eluent Synthesizer

    1 piece(s)

  • 
            
    PTFE capillary 0.75 mm i.d. / 3 m
            
     
    6.1803.160
    PTFE capillary 0.75 mm i.d. / 3 m  


    PEEK capillary for use with adsorber module.


    4 piece(s)

  • FEP tubing / M6 / 9 cm
    6.1805.040
    FEP tubing / M6 / 9 cm
    With light and kink protection

    2 piece(s)

  • 
    T connector / M6 inner
    6.1808.060
    T connector / M6 inner

    3 M6 inner threads.


    1 piece(s)

  • 
            
    Adapter Dosino port 4, M6 inner
    6.1808.280
    Adapter Dosino port 4, M6 inner


    Adapter for use with Dosino port 4 in IC. For connecting to M6 connector.


    1 piece(s)

  • Silicone tubing 6 mm i.d. /  2 m
    6.1816.080
    Silicone tubing 6 mm i.d. /  2 m


    Drainage tubing to the "Waste Collector".


    2 piece(s)

  • PEEK sample loop 250 µL
    6.1825.290
    PEEK sample loop 250 µL

    Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.

    1 piece(s)

  • PEEK capillary 0.5 mm i.d., 15 cm
    6.1831.040
    PEEK capillary 0.5 mm i.d., 15 cm
    For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    1 piece(s)

  • 
    FEP tubing connection to Absorber Module, M6, 150 cm
    6.1838.020
    FEP tubing connection to Absorber Module, M6, 150 cm

    2 piece(s)

  • Clip for SGJ 14/15
    6.2023.020
    Clip for SGJ 14/15
    Clip for SGJ 14/16

    2 piece(s)

  • 
    Dosino holder for the Absorber Module
     
    6.2057.230
    Dosino holder for the Absorber Module  

    Holder for fastening Dosinos to the Absorber Module.


    2 piece(s)

  • Cable USB A - USB B  1.8 m
    6.2151.020
    Cable USB A - USB B 1.8 m
    USB connecting cable

    1 piece(s)

  • Colored sleeves for capillaries
    6.2251.000
    Colored sleeves for capillaries
    Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.

    1 piece(s)

  • 
    Absorber tube to the Absorber Module
    6.2421.000
    Absorber tube to the Absorber Module

    Absorber tube for the absorption of the combustion gases from the Combustion Module.


    1 piece(s)

  • Capillary cutter
    6.2621.080
    Capillary cutter
    For plastic capillaries. Used with IC instruments

    1 piece(s)

  • Pressure screw 5x
    6.2744.010
    Pressure screw 5x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    3 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    3 piece(s)

  • Pressure screw long
    6.2744.090
    Pressure screw long
    Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)

    4 piece(s)

  • Pressure screw PEEK UNF 1/4-28, 3 pieces
    6.2744.170
    Pressure screw PEEK UNF 1/4-28, 3 pieces
    Fixing connecting capillaries of the eluent components at the Eluent Synthesizer

    1 piece(s)

  • Adapter UNF 10/32 outer / M6 inner
    6.2744.200
    Adapter UNF 10/32 outer / M6 inner
    Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)

    1 piece(s)

  • Screw stopper 10/32 long
    6.2744.220
    Screw stopper 10/32 long
    For Professional IC Instruments. For sealing unused ports of degassers and MCS.

    8 piece(s)

  • 
    PEEK pressure screw 14 mm, 3 pcs.
    6.2744.350
    PEEK pressure screw 14 mm, 3 pcs.

    With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.


    2 piece(s)

  • 
    Holder for absorber tubing
    6.2766.000
    Holder for absorber tubing

    Holder for fastening the absorber tubing in the Absorber Module.


    1 piece(s)

  • 
    Holder for inlet valve
    6.2766.010
    Holder for inlet valve

    Holder for inlet valve to the Absorber Module.


    1 piece(s)

  • Inlet valve PEEK
    6.2824.170
    Inlet valve PEEK
    Metal-free check valve for the inletof IC pump heads

    1 piece(s)

  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

Last ned en komplett deleliste i PDF:

  • IC equipment: Waste Collector
    6.5336.000
    IC equipment: Waste Collector

    Waste Collector for up to five waste capillaries.