894 Professional CVS fully and flexibly automated for large sample series

894 Professional CVS fully and flexibly automated for large sample series
Artikkelnummer: MVA-21

Automated analysis system for high-performance, flexible determination of organic additives in electroplating baths using "Cyclic Voltammetric Stripping" (CVS), "Cyclic Pulse Voltammetric Stripping" (CPVS) and chronopotentiometry (CP). Comprising 894 Professional CVS, 858 Professional Sample Processor, four 800 Dosinos, 843 Pump Station, measuring head for rotating disk electrodes and extensive accessories. For sample series of up to 56 samples.

The viva software is required for control, data recording and evaluation. PC, electrode set and viva license are to be ordered separately.

  • Dokumenter
  • Delebetegnelse
  • Tilleggsutstyr
  • Brochure: 894 Professional CVS – Cyclic Voltammetric Stripping for the determination of additives in electroplating baths (english)
    • 中文产品手册:894 Professional CVS-Cyclic Voltammetric Stripping(循环伏安溶出分析)用于测定电镀池中的添加剂 (中文)
    • Prospekt: 894 Professional CVS – Cyclic Voltammetric Stripping zur Bestimmung von Additiven in galvanischen Bädern (deutsch)

Last ned en komplett deleliste i PDF:

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    2 piece(s)

  • 843 Membrane Pump Station for Professional VA/CVS systems
    2.843.0240
    843 Membrane Pump Station for Professional VA/CVS systems

    The 843 Membrane Pump Station enables the automatic rinsing and emptying of the measuring vessel in partly automated and fully automated Professional VA and CVS systems. It has two built-in membrane pumps that can be controlled via the remote signal.

    The versions for VA and CVS are equipped with the complete accessories for the automatic rinsing and emptying of the measuring vessel.

    1 piece(s)

  • 858 Professional Sample Processor for VA and CVS
    2.858.0110
    858 Professional Sample Processor for VA and CVS

    The 858 Professional Sample Processor for VA and CVS, in conjunction with Professional VA/CVS instruments and viva, enables the fully automatic processing of large sample series of organic additives in electroplating baths, e.g. "brighteners" and "suppressors" using "Cyclic Voltammetric Stripping" (CVS). The system is controlled directly by the viva software and permits automatic changes of method between different types of determinations. The sample rack supplied holds 56 samples of a maximum of 11 mL and 28 samples of a maximum of 50 mL for brightener determination.

    The 858 Professional Sample Processor for VA and CVS is supplied with built-in robotic arm, together with accessories, sample rack and connection cable for setting up a complete workplace, although it does not come with rinsing equipment.

    1 piece(s)

  • 894 Professional CVS semiautomated
    2.894.1210
    894 Professional CVS semiautomated

    894 Professional CVS semiautomated is a convenient, high-end routine analyzer for the determination of organic additives in electroplating baths using "Cyclic Voltammetric Stripping" (CVS), "Cyclic Pulse Voltammetric Stripping" (CPVS) and Chronopotentiometry (CP). The proven Metrohm electrode technique in combination with a completely newly designed potentiostat/galvanostat and the extremely high-performance viva software opens up new perspectives in CVS. The replaceable measuring head enables rapid changes between various applications with different electrodes. The potentiostat with certified calibrator readjusts itself automatically before each measurement and guarantees a maximum in precision. The integrated temperature measurement input allows you to monitor the solution temperature during the measurement.

    The two 800 Dosinos supplied permit auxiliary solutions to be added automatically during the determination, e.g., VMS, standard solutions or samples for the Dilution Titration technique (DT).

    The viva software is required for control, data recording and evaluation.

    The 894 Professional CVS semiautomated is supplied with extensive accessories and a measuring head for rotating disk electrodes. Electrode set and viva license are to be ordered separately.

    1 piece(s)

  • Remote cable 843 Pump Station to Sample Processor
    6.2141.300
    Remote cable 843 Pump Station to Sample Processor
    Remote cable for the direct connection of the 843 Pump Station to the pump connectors of the Sample Processors

    1 piece(s)

  • 
    Equipment with 2 dosing units for VA and CVS measurements
    6.5339.500
    Equipment with 2 dosing units for VA and CVS measurements

    Accessory set for two auxiliary solutions for expanding VA or CVS systems. Contains two 2 mL dosing units, two 100 mL clear glass bottles, bottle holder for two bottles and connector material. Without Dosinos.


    1 piece(s)

Last ned en komplett deleliste i PDF:

  • 846 Dosing Interface
    2.846.0010
    846 Dosing Interface

    USB-capable control unit for connecting a maximum of four 800 Dosinos or 805 Dosimats for dosing and Liquid Handling tasks. A Touch Control or the connection to a PC with tiamo™, MagIC Net, viva or 797 VA Computrace is required for operation.

  • Pt1000 temperature sensor for CVS (installation length 9 cm)
    6.1110.120
    Pt1000 temperature sensor for CVS (installation length 9 cm)

    Pt1000 temperature sensor (class B) for Professional CVS Instruments.

  • Electrode cable / 1 m / 2 x 2 mm
    6.2104.140
    Electrode cable / 1 m / 2 x 2 mm
    For connecting temperature sensors with Metrohm plug-in head G with 780, 781, 826, 827 pH/Ion meters and all Titrandos
  • CVS electrode equipment with 1 mm platinum electrode for Professional VA/CVS instruments
    6.5339.000
    CVS electrode equipment with 1 mm platinum electrode for Professional VA/CVS instruments

    Complete electrode set for the determination of organic additives in electroplating baths with CVS (Cyclic Voltammetric Stripping). Contains rotating platinum working electrode (electrode diameter: 1 mm), reference electrode, platinum auxiliary electrode, measuring vessels and electrolyte solutions.

  • CVS electrode equipment with 2 mm platinum electrode for Professional VA/CVS instruments
    6.5339.010
    CVS electrode equipment with 2 mm platinum electrode for Professional VA/CVS instruments

    Complete electrode set for the determination of organic additives in electroplating baths with CVS (Cyclic Voltammetric Stripping). Contains rotating platinum working electrode (electrode diameter: 2 mm), reference electrode, platinum auxiliary electrode, measuring vessels and electrolyte solutions.

  • CVS electrode equipment with 3 mm platinum electrode for Professional VA/CVS instruments
    6.5339.020
    CVS electrode equipment with 3 mm platinum electrode for Professional VA/CVS instruments

    Complete electrode set for the determination of organic additives in electroplating baths with CVS (Cyclic Voltammetric Stripping). Contains rotating platinum working electrode (electrode diameter: 3 mm), reference electrode, platinum auxiliary electrode, measuring vessels and electrolyte solutions.