"ProfIC 10 – Anion" – Professional IC System with Inline Sample Preconcentration, Matrix Elimination and Neutralization

"ProfIC 10 – Anion" – Professional IC System with Inline Sample Preconcentration, Matrix Elimination and Neutralization
Artikkelnummer: ProfIC 10 - Anion

The Professional IC system with conductivity detection enables the determination of anions in difficult matrices. "ProfIC 10" with Metrohm Inline Sample Preconcentration, Matrix Neutralization and Matrix Elimination enables chromatography without limitation by the matrix and guarantees a long lifetime for the analytic separation column.
 

Schematic diagram
 

  • Spesifikasjoner
  • Delebetegnelse
  • Tilleggsutstyr

Tekniske data

Parts

1 x 2.850.2190 850 Professional IC Anion
1 x 2.850.9010 850 Conductivity Detector
1 x 2.858.0030 858 Professional Sample Processor
1 x 6.1602.150 Bottle attachment
1 x 6.1608.070 Eluent bottle 2 L, GL 45
1 x 6.1825.230 PEEK sample loop 10 µL

 

IC separation column, preconcentration column, sample rack, sample vessels as well as MagIC Net have to be ordered separately and in accordance with the particular application.

Last ned en komplett deleliste i PDF:

  • 
    IC Conductivity Detector
    2.850.9010
    IC Conductivity Detector

    Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.


    1 piece(s)

  • 
    858 Professional Sample Processor – Pump – Injector
    2.858.0030
    858 Professional Sample Processor – Pump – Injector

    The 858 Professional Sample Processor – Pump – Injector processes samples from 500 µL to 500 mL. The sample transfer takes place either with the installed bidirectional two-channel peristaltic pump or by means of an 800 Dosino. In addition, a six-way injection valve is available for the sample preparation.


    1 piece(s)

  • 
    Bottle attachment / GL 45 - 3 x UNF 10/32
    6.1602.150
    Bottle attachment / GL 45 - 3 x UNF 10/32

    For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.


    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    1 piece(s)

  • PEEK sample loop 10 µL
    6.1825.230
    PEEK sample loop 10 µL
    For injection valve, with 2 PEEK pressure screws

    1 piece(s)

Last ned en komplett deleliste i PDF:

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

  • Metrosep I Trap 1 - 100/4.0
    6.1014.200
    Metrosep I Trap 1 - 100/4.0


    The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation." Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.


  • Bottle / 300 mL
    6.1608.080
    Bottle / 300 mL

    Rinsing vessel for IC Sample Processors.

  • Sample rack 148 x 11 mL + 3 x 300 mL
    6.2041.440
    Sample rack 148 x 11 mL + 3 x 300 mL

    Sample rack for 148 x 11 mL samples with 3 rinsing beakers.

  • 
            
    Sample rack 54 x 11 mL + 1 x 300 mL
    6.2041.760
    Sample rack 54 x 11 mL + 1 x 300 mL


    Sample rack with small diameter for 54 x 11 mL sample vessels in two rows and additionally 1 x 300 mL bottle.


  • Sample tubes 2.5 mL
    6.2743.040
    Sample tubes 2.5 mL
    2.5 mL. 2000 pieces. For IC Sample Processors
  • Sample tubes 11 mL
    6.2743.050
    Sample tubes 11 mL
    2000 pieces. For IC Sample Processors and VA Autosampler
  • Stopper with perforation
    6.2743.070
    Stopper with perforation
    2000 pieces. For IC Sample Processors
  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • IC equipment for Liquid Handling with the Dosino
    6.5330.040
    IC equipment for Liquid Handling with the Dosino

    Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.


  • IQ/OQ Kit for IC
    6.5333.000
    IQ/OQ Kit for IC
    The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.
  • Connecting set to Dosing Unit: port 4
    6.5620.000
    Connecting set to Dosing Unit: port 4
    For connecting a tubing to port 4 of the Dosing Unit (Luer to M6), incl. fixation