"ProfIC 7 – Anion" – Professional IC System with Inline Dilution and Dialysis

"ProfIC 7 – Anion" – Professional IC System with Inline Dilution and Dialysis
Artikkelnummer: ProfIC 7 - Anion

The professional IC system with conductivity detection enables the fully automatic determination of anions that are present in very high concentrations and in a problematic matrix. Emulsions, samples containing fats and proteins or heavily contaminated waste waters are not always compatible with ion chromatography, even after upstream filtration. That is why "ProfIC 7" is equipped with the Metrohm-patented Inline Dialysis (European Patent 0 820 804, US Patent 5,861,097).
 

Schematic diagram
 

  • Spesifikasjoner
  • Delebetegnelse
  • Tilleggsutstyr

Tekniske data

Parts

1 x 2.800.0010 800 Dosino
1 x 2.801.0010 801 Stirrer (magnetic stirrer)
1 x 2.850.2110 850 Professional IC
1 x 2.850.9010 850 Conductivity Detector
1 x 2.858.0020 858 Professional Sample Processor
1 x 6.3032.210 dosing unit 10 mL
1 x 6.5330.000 IC equipment for dialysis
1 x 6.5330.020 IC equipment for sample dilution

 

IC column, sample rack, sample vessels as well as MagIC Net have to be ordered separately, depending on the particular application.

Last ned en komplett deleliste i PDF:

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    1 piece(s)

  • 
    801 Stirrer
    2.801.0010
    801 Stirrer

    Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).


    1 piece(s)

  • 
    IC Conductivity Detector
    2.850.9010
    IC Conductivity Detector

    Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.


    1 piece(s)

  • 
    858 Professional Sample Processor – Pump
    2.858.0020
    858 Professional Sample Processor – Pump

    The 858 Professional Sample Processor – Pump processes samples from 500 µL to 500 mL. The sample transfer takes place either with the installed bidirectional two-channel peristaltic pump or with an 800 Dosino.


    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

Last ned en komplett deleliste i PDF:

  • Bottle / 300 mL
    6.1608.080
    Bottle / 300 mL

    Rinsing vessel for IC Sample Processors.

  • Sample rack 148 x 11 mL + 3 x 300 mL
    6.2041.440
    Sample rack 148 x 11 mL + 3 x 300 mL

    Sample rack for 148 x 11 mL samples with 3 rinsing beakers.

  • 
            
    Sample rack 54 x 11 mL + 1 x 300 mL
    6.2041.760
    Sample rack 54 x 11 mL + 1 x 300 mL


    Sample rack with small diameter for 54 x 11 mL sample vessels in two rows and additionally 1 x 300 mL bottle.


  • Dialysis membrane (polyamide)
    6.2714.030
    Dialysis membrane (polyamide)
    For inline dialysis and filtration
  • Sample tubes 2.5 mL
    6.2743.040
    Sample tubes 2.5 mL
    2.5 mL. 2000 pieces. For IC Sample Processors
  • Sample tubes 11 mL
    6.2743.050
    Sample tubes 11 mL
    2000 pieces. For IC Sample Processors and VA Autosampler
  • Stopper with perforation
    6.2743.070
    Stopper with perforation
    2000 pieces. For IC Sample Processors
  • IQ/OQ Kit for IC
    6.5333.000
    IQ/OQ Kit for IC
    The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.