916 Food Ti-Touch

916 Food Ti-Touch
Beställningsnummer: 2.916.4010

''Reduce to the max'' – this is the 916 Ti-Touch's concept. The new compact titrator from Metrohm offers the maximum in the class of stand-alone systems for routine analysis.

The 916 Food Ti-Touch offers you the complete package for aqueous acid-base titrations in the food industry. In addition to the determination methods described in detail, you also receive the complete accessories for your titrations. Included in the package are titrator with propeller stirrer, 800 Dosino, 20 mL dosing unit und an iEcotrode Plus, an intelligent pH glass electrode specialized for aqueous acid-base titrations.

Profit from our more than 60 years of application know-how. Almost 100 tried and tested methods are waiting to be used by you. Programming the titrator can be dispensed with. Simply load the method from the USB Memory Stick supplied in the scope of delivery. The methods were formulated in the light of the following publications:

  • Official Methods of Analysis of the Association of Official Analytical Chemists (AOAC, USA)
  • U.S. Environmental Protection Agency (EPA)
  • Swiss Food Manual
  • German standard methods for the examination of water, waste water and sludge
  • Dokument
  • Ingående delar och tillbehör
  • Alternativ

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • OMNIS electrode holder
    6.02005.000
    OMNIS electrode holder

    Electrode holder for one OMNIS titration system.

    1 piece(s)

  • iEcotrode plus
    6.0280.300
    iEcotrode plus

    Intelligent, combined pH electrode with integrated memory chip for storing of sensor data. This electrode is suitable for aqueous acid/base titrations.

    The fixed ground-joint diaphragm is insensitive to contamination.
    Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.
    iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.

    1 piece(s)

  • Extractor rod
    6.1546.030
    Extractor rod
    For PTFE piston of dosing unit

    1 piece(s)

  • Amber glass bottle / 1000 mL / GL 45
    6.1608.023
    Amber glass bottle / 1000 mL / GL 45
    For Exchange Units. Bottle for auxiliary solutions.

    1 piece(s)

  • Stirring propeller / 96 mm
    6.1909.010
    Stirring propeller / 96 mm
    Propeller stirrer, length from lower edge of SGJ: 96 mm. For use with beakers with 722, 802 Rod Stirrer

    1 piece(s)

  • Clamping ring
    6.2013.010
    Clamping ring

    For support rods with a diameter of 10 mm.


    1 piece(s)

  • Support rod / 300 mm
    6.2016.050
    Support rod / 300 mm

    1 piece(s)

  • Holding clip for bottles
    6.2043.005
    Holding clip for bottles

    Holding spring for reagent bottles in exchange units.


    2 piece(s)

  • Adapter red  2 mm plug / 4 mm socket
    6.2103.130
    Adapter red 2 mm plug / 4 mm socket
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Adapter black 2 mm plug / B socket 4 mm
    6.2103.140
    Adapter black 2 mm plug / B socket 4 mm
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Power supply unit 100 - 240 V/24 V DC
    6.2164.010
    Power supply unit 100 - 240 V/24 V DC
    Power supply unit for 915 KF Ti-Touch and 916 Ti-Touch

    1 piece(s)

  • Buffer solutions pH 4, 7 and 9
    6.2307.230
    Buffer solutions pH 4, 7 and 9
    Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL

    1 piece(s)

  • Electrolyte  3 mol/L KCl (50 mL)
    6.2308.050
    Electrolyte 3 mol/L KCl (50 mL)
    Electrolyte solution c(KCl) = 3 mol/L (for Ag/AgCl reference systems)

    1 piece(s)

  • Storage solution
    6.2323.000
    Storage solution
    Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L

    1 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • Guiding sleeve
    6.2709.070
    Guiding sleeve
    For fixation of buret and dosing tips in titration heads and electrode holders

    1 piece(s)

  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • 
    Demo CD for tiBase 1.1
    6.6063.901
    Demo CD for tiBase 1.1

    Demo CD for tiBase. Test version for 30 days.


    1 piece(s)

  • USB flash drive for Ti-Touch
    6.6066.000
    USB flash drive for Ti-Touch
    USB flash drive for 915 KF Ti-Touch and 916 Ti-Touch.

    1 piece(s)

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • USB thermal printer Neo's
    2.141.0100
    USB thermal printer Neo's

    Compact printer with USB interface for the Ti-Touch, the Titrino plus and Dosimat plus and the 91X Meter instruments.

    Paper width 60 mm (40 characters). Including 6.2151.120 USB cable.

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

  • 804 Ti Stand with stand
    2.804.0040
    804 Ti Stand with stand
    Titration stand and controller for 802 Rod Stirrer. The 804 Ti Stand together with the optional 802 Rod Stirrer provides an alternative to the magnetic stirrer. Ti Stand with base plate, support rod and electrode holder.
  • 805 Dosimat
    2.805.0010
    805 Dosimat
    Dosing device for the Titrando and Sample Processors with read/write hardware for intelligent Exchange Units. With permanently attached cable. Without Exchange Unit.
  • 810 Sample Processor
    2.810.0010
    810 Sample Processor

    Sample Processor for the automated analysis of routine samples using 916 Ti-Touch or 915 KF Ti-Touch.

    Sample Processor with one workstation and one built-in membrane pump for the automatic processing of potentiometric as well as Karl Fischer titrations, in series with small to medium quantities. In addition to the built-in pump, an additional one (membrane or peristaltic) and up to three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately.

     

  • Ag Titrode
    6.0430.100
    Ag Titrode

    Combined silver ring electrode with a pH glass membrane as reference electrode.
    This maintenance-free electrode is well suited for precipitation titrations when the pH value remains constant (titrant silver nitrate) of, e.g.:
     

    • chloride, bromide, iodide
    • sulfides
    • hydrogen sulfide
    • mercaptans
    • cyanides


    This electrode is stored in deion. water.

    Depending on the application, we recommend using an Ag Titrode with a coating (AgBr or Ag2S coating), which can be ordered accordingly.

  • iAg Titrode
    6.0470.300
    iAg Titrode

    Intelligent, combined silver ring electrode with a pH glass membrane as reference electrode and integrated memory chip for storing sensor data.
    This maintenance-free electrode is well suited for precipitation titrations when the pH value remains constant (titrant silver nitrate) of, e.g.:
     

    • chloride, bromide, iodide
    • sulfides
    • hydrogen sulfide
    • mercaptans
    • cyanides


    This electrode is stored in deion. water.

    Depending on the application, we recommend using an Ag Titrode with a coating (AgBr or Ag2S coating), which can be ordered accordingly.

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
  • Protective cover for 900 Touch Control
    6.2723.300
    Protective cover for 900 Touch Control
    Protective cover for 900 Touch Control
  • Exchange Unit 1 mL
    6.3026.110
    Exchange Unit 1 mL
    Exchange Unit with integrated data chip with 1 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 5 mL
    6.3026.150
    Exchange Unit 5 mL
    Exchange Unit with integrated data chip with 5 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 10 mL
    6.3026.210
    Exchange Unit 10 mL
    Exchange unit with integrated data chip with 10 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 20 mL
    6.3026.220
    Exchange Unit 20 mL
    Exchange unit with integrated data chip with 20 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange unit 50 mL
    6.3026.250
    Exchange unit 50 mL

    Exchange unit with integrated data chip with 50 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion tip and standard amber glass reagent bottle.


  • Dosing Unit 2 mL
    6.3032.120
    Dosing Unit 2 mL
    Dosing unit with integrated data chip with 2 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 glass thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.