"ProfIC 5 – Cation" – Professional IC System with variable sample preconcentration

"ProfIC 5 – Cation" – Professional IC System with variable sample preconcentration
Beställningsnummer: ProfIC 5 - Cation

The Professional IC system with conductivity detection enables trace analysis of cations or anions (non-suppressed). With the "ProfIC 5", concentrations down to the lowest ppb range (µg/L) can be safely and accurately determined. The intelligent 800 Dosino takes over the high-precision preconcentration of the sample on the preconcentration column. This replaces the sample loop.
 

Schematic diagram
 

  • Tekniska specifikationer
  • Ingående delar och tillbehör
  • Alternativ

Teknisk data

Parts

1 x 2.800.0010 800 Dosino
1 x 2.850.1010 850 Professional IC
1 x 2.850.9010 850 Conductivity Detector
1 x 2.858.0010 858 Professional Sample Processor
1 x 6.1014.200 Metrosep I Trap 1 column
1 x 6.1825.280 PFA transfer tubing 20 mL
1 x 6.2841.100 rinsing station for IC Sample Processor
1 x 6.3032.210 dosing unit 10 mL
1 x 6.5330.040 IC equipment for Liquid Handling

 

IC separation column, preconcentration column, sample rack, sample vessels as well as MagIC Net have to be ordered separately and in accordance with the particular application.

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    1 piece(s)

  • 
    IC Conductivity Detector
    2.850.9010
    IC Conductivity Detector

    Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.


    1 piece(s)

  • 
    858 Professional Sample Processor
    2.858.0010
    858 Professional Sample Processor

    The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.


    1 piece(s)

  • Metrosep I Trap 1 - 100/4.0
    6.1014.200
    Metrosep I Trap 1 - 100/4.0


    The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation." Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.


    1 piece(s)

  • Transfer tubing PFA, 20 mL
    6.1825.280
    Transfer tubing PFA, 20 mL

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • IC equipment for Liquid Handling with the Dosino
    6.5330.040
    IC equipment for Liquid Handling with the Dosino

    Accessories set for mounting a Dosino on intelligent IC instruments for Liquid Handling.


    1 piece(s)

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • 
    Metrosep C PCC 1 HC/4.0
    6.1010.310
    Metrosep C PCC 1 HC/4.0
    For cation preconcentration and matrix elimination
  • Metrosep C 4 - 150/4.0
    6.1050.420
    Metrosep C 4 - 150/4.0

    The Metrosep C 4 - 150/4.0 is the universal standard column in cation analysis for accomplishing high separating efficiency in a short time. The Metrosep C 4 - 150/4.0 is the ideal separation column for the analysis of alkaline and earth alkaline metals in aqueous media.

  • Metrosep C 4 Guard/4.0
    6.1050.500
    Metrosep C 4 Guard/4.0


    The Metrosep C 4 Guard/4.0 contains the C-4 column material and is used to protect all Metrosep cation columns that have a substrate based on silica gel. Particles and contaminations are reliably retained, allowing the lifetime of the analytical separation column to be prolonged considerably. The economical price is an additional plus. The Metrosep C 4 Guard/4.0 also functions according to the "On Column Guard System" and is screwed directly onto the separation column with nearly no dead volume.


  • Bottle / 300 mL
    6.1608.080
    Bottle / 300 mL

    Rinsing vessel for IC Sample Processors.

  • Sample rack 16 x 120 mL
    6.2041.390
    Sample rack 16 x 120 mL
    Sample rack for 16 x 120 mL samples, one-row
  • Sample rack 148 x 11 mL + 3 x 300 mL
    6.2041.440
    Sample rack 148 x 11 mL + 3 x 300 mL

    Sample rack for 148 x 11 mL samples with 3 rinsing beakers.

  • 
            
    Sample rack 54 x 11 mL + 1 x 300 mL
    6.2041.760
    Sample rack 54 x 11 mL + 1 x 300 mL


    Sample rack with small diameter for 54 x 11 mL sample vessels in two rows and additionally 1 x 300 mL bottle.


  • Sample tubes 2.5 mL
    6.2743.040
    Sample tubes 2.5 mL
    2.5 mL. 2000 pieces. For IC Sample Processors
  • Sample tubes 11 mL
    6.2743.050
    Sample tubes 11 mL
    2000 pieces. For IC Sample Processors and VA Autosampler
  • Stopper with perforation
    6.2743.070
    Stopper with perforation
    2000 pieces. For IC Sample Processors
  • Al foil
    6.2820.000
    Al foil
    1000 circular sheets of 80 mm diameter. Thickness: 0.010 mm. Used together with 6.2037.030 Foil holder for 6.1432.210 Sample beaker. For 674 KF Sample Changer
  • IQ/OQ Kit for IC
    6.5333.000
    IQ/OQ Kit for IC
    The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.
  • Connecting set to Dosing Unit: port 4
    6.5620.000
    Connecting set to Dosing Unit: port 4
    For connecting a tubing to port 4 of the Dosing Unit (Luer to M6), incl. fixation