Metrosep A Supp 10 - 50/2.0

Metrosep A Supp 10 - 50/2.0
Beställningsnummer: 6.1020.250

The Metrosep A Supp 10 - 50/4.0 separation column is based on a high-capacity polystyrene-divinylbenzene copolymer with a particle size of only 4.6 µm. Temperature, flow and eluent composition can be used to modify the properties of the column to accommodate the current application directly. The 2 mm Metrosep A Supp 10 separation columns are packed with the same material as the corresponding 4 mm separation columns. The short length and associated relatively low overall capacity of this 50 mm column enable very rapid separations of standard anions.

The Metrosep A Supp 10 - 50/4.0 is well-suited to simple separation problems and uncomplicated matrices. Thanks to its low flow, this microbore separation column is ideally suitable for IC-MS applications.

  • Tekniska specifikationer
  • Dokument
  • Ingående delar och tillbehör
  • Alternativ
  • Kromatogram
Carrier material Polystyrene-divinylbenzene copolymer with quaternary ammonium groups
Column capacity 4.6 µmol (Cl)
Column dimensions 50 x 2.0 mm

Carbonate eluent (standard eluent)

Sodium hydrogen carbonate: 5.0 mmol/L; 840 mg/2 L
Sodium carbonate: 5.0 mmol/L; 1,060 mg/2 L
(column temperature 45 °C)
Housing material PEEK
Max. pressure 25 MPa
Maximum flow 1.3 mL/min
Organic modifier 0 - 100%
Particle size 4.6 µm (mono dispersive)
pH range 0...14
Standard flow 0.25 mL/min
Standard temperature 45 °C
Temperatur range 10...70 °C