separate polymer membrane electrode, Ca

separate polymer membrane electrode, Ca
Beställningsnummer: 6.0508.110

Calcium-selective electrode with polymer membrane.
This ISE has to be used in combination with a reference electrode and is suitable for:
 

  • ion measurements of Ca2+ (5*10-6 to 1 mol/L) in aqueous solutions
  • ion measurements in small sample volumes (minimum immersion depth 1 mm)
  • complexometric (back) titrations (e.g., determination of water hardness)


Thanks to a robust/break-proof plastic shaft made of PVC, this sensor is mechanically very resistant.

  • Tekniska specifikationer
  • Dokument
  • Applikationer
  • Ingående delar och tillbehör
  • Alternativ
Electrode plug-in head Metrohm plug-in head G
Indicator electrode shape Flat
Indicator electrode type Polymer (Ca)
Max. installation length (mm) 123
Measuring range 5x10-6 ... 1
Measuring unit mol/L
Min. immersion depth (mm) 1
pH range 2 ... 12
SGJ sleeve Flexible SGJ sleeve
Shaft diameter bottom (mm) 12
Shaft diameter top (mm) 12
Shaft material PVC
Temperature range, long-term (°C) 0 ... 40
Temperature range, short-term (°C) 0 ... 40

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • Sleeve with SGJ 14/12 mm
    6.1236.050
    Sleeve with SGJ 14/12 mm
    Sleeve with SGJ 14/12 mm, polyethylene.

    1 piece(s)

  • 
            
    Storage vessel
            
     
    6.2008.040
    Storage vessel  


    Together with 6.2008.050 storage vessel holder provides a support for the electrode on 6.3032.XXX dosing units.


    1 piece(s)

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • LL ISE reference electrode
    6.0750.100
    LL ISE reference electrode

    Silver / silver chloride reference electrode with double junction system.
    This reference electrode is well suited for:

    • automated applications
    • ion measurements
    • surfactant titrations

    The ground-joint diaphragm, which is insensitive to contamination, offers a constant and reproducible electrolyte outflow. Additionally, the reference electrolyte is gelified for even better signal stability. The sensor is delivered with c(KCl) = 3 mol/L as bridge electrolyte, which can be freely selected and exchanged as needed.

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).