Ion-selective electrode, Pb

Ion-selective electrode, Pb
Beställningsnummer: 6.0502.170

Lead-selective electrode with crystal membrane.
This ISE has to be used in combination with a reference electrode and is suitable for:
 

  • ion measurements of Pb2+ (10-6 to 0.1 mol/L)
  • ion measurements in small sample volumes (minimum immersion depth 1 mm)
  • titrations (e.g., sulfate determination with lead nitrate)


Thanks to the robust/break-proof plastic shaft made of EP, this sensor is mechanically very resistant.
The polishing set supplied enables easy cleaning and renewing of the electrode surface.

  • Tekniska specifikationer
  • Dokument
  • Applikationer
  • Ingående delar och tillbehör
  • Alternativ
Electrode plug-in head Metrohm plug-in head G
Indicator electrode shape Flat
Indicator electrode type Crystal (Pb)
Max. installation length (mm) 123
Measuring range 1x10-6 ... 0.1
Measuring unit mol/L
Min. immersion depth (mm) 1
pH range 4 ... 7
SGJ sleeve Flexible SGJ sleeve
Shaft diameter bottom (mm) 12
Shaft diameter top (mm) 12
Shaft material EP
Temperature range, long-term (°C) 0 ... 80
Temperature range, short-term (°C) 0 ... 80

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • Polishing set for solid-state electrodes
    6.2802.000
    Polishing set for solid-state electrodes
    Polishing set with 1 polishing cloth and about 2 g aluminum oxide powder (grain size 0.3 µm)

    1 piece(s)

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • LL ISE reference electrode
    6.0750.100
    LL ISE reference electrode

    Silver / silver chloride reference electrode with double junction system.
    This reference electrode is well suited for:

    • automated applications
    • ion measurements
    • surfactant titrations

    The ground-joint diaphragm, which is insensitive to contamination, offers a constant and reproducible electrolyte outflow. Additionally, the reference electrolyte is gelified for even better signal stability. The sensor is delivered with c(KCl) = 3 mol/L as bridge electrolyte, which can be freely selected and exchanged as needed.

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).