Solitrode HF

Solitrode HF
Beställningsnummer: 6.0223.100

Combined pH electrode for titrations/measurements in HF-containing samples. This electrode is mechanically resistant thanks to the robust/unbreakable plastic shaft made of polypropylene and impact protection for the glass membrane.
Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.

  • Tekniska specifikationer
  • Dokument
  • Applikationer
  • Ingående delar och tillbehör
  • Alternativ
Asymmetry potential 0... +/- 15
Diaphragm Ceramic diaphragm
Electrode plug-in head Metrohm plug-in head G
Electrode slope > 0.97
Electrode zero point (mV) +/- 15
Electrolyte flow rate (μl/h) 3 ... 10
Indicator electrode shape Hemisphere
Max. installation length (mm) 113
Measuring range 1 ... 12
Measuring unit pH
Membrane glass type Special
Membrane resistance 100 ... 650
Min. immersion depth (mm) 15
pH range 1...12
Reference electrolyte type c(KCl) = 3 mol/L
Reference system LL system
Resistance (kOhm) 5
SGJ sleeve Flexible
Shaft diameter bottom (mm) 12
Shaft diameter top (mm) 12
Shaft material PP
Temperature range, long-term (°C) 0 ... 40
Temperature range, short-term (°C) 0 ... 40

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • Sleeve with SGJ 14/12 mm
    Sleeve with SGJ 14/12 mm
    Sleeve with SGJ 14/12 mm, polyethylene.

    1 piece(s)

    Storage vessel
    Storage vessel  

    Together with 6.2008.050 storage vessel holder provides a support for the electrode on 6.3032.XXX dosing units.

    1 piece(s)

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • Electrode cable / 1 m / F
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
  • Electrolyte  3 mol/L KCl (250 mL)
    Electrolyte 3 mol/L KCl (250 mL)
    Electrolyte solution c(KCl) = 3 mol/L, (for Ag/AgCl reference systems)
  • Storage solution
    Storage solution
    Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L
  • pHit kit
    pHit kit

    Maintenance kit for pH electrodes

    The kit contains:

    • 50 mL cleaning solution
    • 50 mL 3M KCl solution
    • 50 mL storage solution
    • 2 Storage vessels
    • Instructions for use
  • Cleaning solution 3 x 50 mL
    Cleaning solution 3 x 50 mL

    Reliable measuring results over long periods of time can be guaranteed only if the pH glass membrane and the diaphragm receive preventive and regular care. Cleaning by etching with toxic chemicals or applying mechanical treatment to the diaphragm is not only complicated and expensive, it also accelerates the ageing of the pH glass electrode.
    The cleaning solution was developed for easy and gentle cleaning of pH glass electrodes. Regular use can considerably prolong their service life.

    This cleaning solution is also part of the pHit kit.