917 Coulometer with generator electrode without diaphragm and 885 Compact Oven SC

917 Coulometer with generator electrode without diaphragm and 885 Compact Oven SC
Beställningsnummer: 2.917.2110

The 917 Coulometer is a compact titrator for coulometric water determination in accordance with Karl Fischer. ''Reduced to the max'' – operating module, stirrer and pump are integrated in the 917 Coulometer for rapid reagent replacement. This saves a great deal of space on the laboratory table.

The 917 Coulometer now also fulfills FDA Regulation 21 CFR, Part 11. This means you are always on the safe side when it comes to audits.

The 885 Compact Oven SC is used for automatic thermal sample preparation. The samples are heated in the oven to a temperature of up to 250 °C. This causes the water to vaporize and then be transported with a dry carrier gas into the 917 Coulometer titration cell in which the analysis takes place.

  • Dokument
  • Ingående delar och tillbehör
  • Alternativ

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • Double Pt-wire electrode for coulometry
    6.0341.100
    Double Pt-wire electrode for coulometry

    Indicator electrode used for coulometric Karl Fischer titration.

    1 piece(s)

  • Generator electrode without diaphragm
    6.0345.100
    Generator electrode without diaphragm

    Generator electrode without diaphragm for coulometric Karl Fischer titrations, SGJ 29/22.
    This generator electrode is well suited for most applications where the sample is highly soluble in alcohol.

    1 piece(s)

  • KF adsorber tube for coulometer cell
    6.1403.030
    KF adsorber tube for coulometer cell

    For KF coulometers.


    1 piece(s)

  • SGJ stopper SGJ 14
    6.1437.000
    SGJ stopper SGJ 14

    1 piece(s)

  • KF inlet and aspiration tube
    6.1439.010
    KF inlet and aspiration tube
    KF inlet and aspiration tube for coulometer cell

    1 piece(s)

  • Threaded stopper / M6
    6.1446.040
    Threaded stopper / M6

    2 piece(s)

  • Stopper / B-14/15 / M8
    6.1446.090
    Stopper / B-14/15 / M8

    1 piece(s)

  • Septum 16 mm, 5 pieces
    6.1448.020
    Septum 16 mm, 5 pieces
    Set of 5 pcs.

    2 piece(s)

  • Screw cap with septum, 100 pcs.
    6.1448.067
    Screw cap with septum, 100 pcs.

    Screw cap with septum, suitable for sample glass 8 mL 6.2420.007, 100 pieces
     

    1 piece(s)

  • KF titration vessel with 2 lateral openings / 80-250 mL / coulometric
    6.1465.320
    KF titration vessel with 2 lateral openings / 80-250 mL / coulometric
    For 756 and 831 KF Coulometer

    1 piece(s)

  • Bottle attachment / GL 45 / green
    6.1602.105
    Bottle attachment / GL 45 / green

    For direct dosing from reagent bottles with GL 45 thread.


    2 piece(s)

  • Drying flask cap
    6.1602.145
    Drying flask cap


    Screw cap with GL 45 thread for the 6.1608.050 drying flask.


    2 piece(s)

  • Amber glass bottle / 1000 mL / GL 45
    6.1608.023
    Amber glass bottle / 1000 mL / GL 45
    For Exchange Units. Bottle for auxiliary solutions.

    1 piece(s)

  • Round glass bottle / 1000 mL / GL 45
    6.1608.030
    Round glass bottle / 1000 mL / GL 45

    1 piece(s)

  • Drying bottle / 100 mL / GL 45
    6.1608.050
    Drying bottle / 100 mL / GL 45

    2 piece(s)

  • Adsorber tube with tubing nipple
    6.1609.010
    Adsorber tube with tubing nipple

    Lid with tubing nipple.


    1 piece(s)

  • Overflow protection for Ti Stand
    6.1623.000
    Overflow protection for Ti Stand
    For 803 Ti Stand

    1 piece(s)

  • PVC tubing / 4 mm / 6 mm / 2 m
    6.1801.120
    PVC tubing / 4 mm / 6 mm / 2 m

    1 piece(s)

  • FEP tubing / M6 / 13 cm
    6.1805.010
    FEP tubing / M6 / 13 cm
    With light and kink protection.

    1 piece(s)

  • FEP tubing / M6 / 60 cm
    6.1805.060
    FEP tubing / M6 / 60 cm
    With light and kink protection

    1 piece(s)

  • FEP tubing / M6 / 25 cm
    6.1805.080
    FEP tubing / M6 / 25 cm
    With light and kink protection.

    2 piece(s)

  • PTFE tubing / M8 / 0.5 m
    6.1805.200
    PTFE tubing / M8 / 0.5 m

    2 piece(s)

  • Tubing adapter olive / M8 outer
    6.1808.050
    Tubing adapter olive / M8 outer
    1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.

    1 piece(s)

  • Tube
    6.1819.030
    Tube
    For M8 threaded holes. For 6.1602.1XX bottle attachments and 6.1608.0XX bottles

    1 piece(s)

  • Tube
    6.1819.050
    Tube
    For M8 threaded holes of 6.1602.10X Bottle attachments with 6.1608.030 Aspiration bottle. For 703 and 803 Ti Stand, 681 Pump Unit and 679 Rancimat

    1 piece(s)

  • Filter tube
    6.1821.040
    Filter tube
    Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.

    2 piece(s)

  • Heating tubing
    6.1830.040
    Heating tubing

    Heating tubing with M6 thread for 885 Compact Oven Sample Processor in combination with a 915 Ti-Touch or 917 Coulometer.

    1 piece(s)

  • Stirring bar / 25 mm
    6.1903.030
    Stirring bar / 25 mm

    Stirring bar with magnetic core, PTFE covering, length 25 mm.


    1 piece(s)

  • Clip for SGJ 14/15
    6.2023.020
    Clip for SGJ 14/15
    Clip for SGJ 14/16

    1 piece(s)

  • Holding clip for bottles
    6.2043.005
    Holding clip for bottles

    Holding spring for reagent bottles in exchange units.


    2 piece(s)

  • Titration vessel holder for 899/917
    6.2047.040
    Titration vessel holder for 899/917

    Titration vessel holder for coulometric cells for 899 Coulometer and 917 Ti-Touch

    1 piece(s)

  • Needle holder with Luer lock
    6.2049.050
    Needle holder with Luer lock

    Needle holder (73 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.

    1 piece(s)

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).

    1 piece(s)

  • Electrode cable / 1 m / H
    6.2104.120
    Electrode cable / 1 m / H
    With plug H. For connecting generator electrode - KF Coulometer.

    1 piece(s)

  • 6.2141.340
    Remote cable 885 - Remote Box MSB
    Remote cable for the connection of a 885 Compact Oven Sample Changer to Remote Box MSB (6.2148.010).

    1 piece(s)

  • Remote Box MSB
    6.2148.010
    Remote Box MSB
    Additional remote interface for the connection of devices that can be controlled via remote lines. With permanently attached cable.

    1 piece(s)

  • Power supply unit 100 - 240 V/24 V DC
    6.2164.010
    Power supply unit 100 - 240 V/24 V DC
    Power supply unit for 915 KF Ti-Touch and 916 Ti-Touch

    1 piece(s)

  • Sample glass with thread, 8 mL, 100 pieces
    6.2420.007
    Sample glass with thread, 8 mL, 100 pieces

    Sample glass with thread, 8 mL, suitable for 6.1448.067 screw cap, 100 pieces
     

    1 piece(s)

  • Hexagon key 2.5 mm
    6.2621.140
    Hexagon key 2.5 mm

    1 piece(s)

  • 
    GL 18 screw cap with hole
    6.2701.040
    GL 18 screw cap with hole
    Made of PBT. With a hole for the 6.1448.020 septum. For the 6.5405.000 cell without diaphragm and the 6.1464.32X and 6.1465.320 titration vessels.

    2 piece(s)

  • Sleeve
    6.2713.000
    Sleeve

    For the fat-free ground-joint connection with the standard ground-joint SGJ 14.


    3 piece(s)

  • Sleeve
    6.2713.010
    Sleeve

    Sleeve for the fat-free ground-joint connection with the standard ground-joint SGJ 29.


    1 piece(s)

  • Sleeve
    6.2713.020
    Sleeve

    For the fat-free ground-joint connection with the standard ground-joint SGJ 19.


    1 piece(s)

  • Dust filter
    6.2724.010
    Dust filter
    Dust filter for Rancimats and Karl Fischer ovens.

    1 piece(s)

  • Funnel
    6.2738.000
    Funnel

    For the KF coulometer.


    1 piece(s)

  • Wrench
    6.2739.000
    Wrench
    For tightening connectors

    1 piece(s)

  • Molecular sieve
    6.2811.000
    Molecular sieve
    Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.

    1 piece(s)

  • Needle with Luer connector
    6.2816.030
    Needle with Luer connector

    Needle for filling in mercury into the Multi-Mode Electrode and for sample addition in Karl Fischer titration.


     


    2 piece(s)

  • Needle for gas inlet
    6.2816.070
    Needle for gas inlet
    Used with KF Thermoprep.

    1 piece(s)

  • Outlet needle
    6.2816.080
    Outlet needle
    Used with KF Thermoprep and Oven Sample Processor.

    1 piece(s)

  • Syringe 5 mL
    6.2816.090
    Syringe 5 mL

    5 mL syringe made of PP, with Luer connector.


    2 piece(s)

  • 
    Demo CD for tiBase 1.1
    6.6063.901
    Demo CD for tiBase 1.1

    Demo CD for tiBase. Test version for 30 days.


    1 piece(s)

  • USB flash drive for Ti-Touch
    6.6066.000
    USB flash drive for Ti-Touch
    USB flash drive for 915 KF Ti-Touch and 916 Ti-Touch.

    1 piece(s)

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • Protective cover for 900 Touch Control
    6.2723.300
    Protective cover for 900 Touch Control
    Protective cover for 900 Touch Control