695 VA Autosampler

695 VA Autosampler
Beställningsnummer: 2.695.0010
Flexible high-end x-y-z-Autosampler for the fully automated routine analysis in voltammetry in combination with the 747 VA Stand. The 695 VA Autosampler is completely controlled by the 746 VA Trace Analyzer.
  • Tekniska specifikationer
  • Dokument
  • Ingående delar och tillbehör
  • Alternativ
Dimensions in mm (W/H/D) 606/518/515

Teknisk data

  • Holds up to 80 samples and up to 27 auxiliary solutions.
  • Handles all required solutions: electrolytes, buffers and standards.
  • Solution transfer by pipetting in a volume range of 10 µL...10 mL with a max. error of 1%.
  • Minimal cross contamination due to the integrated surface sensor and intermediate rinsing of the pipetting tip.
  • Two 700 Dosinos are used for rinsing of the measuring vessel and the pipetting tip.
  • Sample rack with 80 x 12 mL sample tubes. Option: 40 x 50 mL sample tubes.
  • Rack for auxiliary solutions with 16 x 50 mL and 1 x 500 mL beaker. Option: rack with additional10 x 50 mL tubes.
  • Option: Holder for rack of 705 UV Digester.

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • KF drying tube / SGJ 14 and straight
    6.1403.010
    KF drying tube / SGJ 14 and straight
    Used for Karl Fischer water determination

    1 piece(s)

  • Threaded stopper / M6
    6.1446.040
    Threaded stopper / M6

    1 piece(s)

  • Measuring vessel / 10-90 mL
    6.1456.210
    Measuring vessel / 10-90 mL
    Measuring vessel for automated VA systems. Dilution vessel for Advanced IC Sample Processor

    1 piece(s)

  • Bottle attachment / GL 45 / green
    6.1602.105
    Bottle attachment / GL 45 / green

    For direct dosing from reagent bottles with GL 45 thread.


    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    1 piece(s)

  • Thread adapter 40 mm to GL 45
    6.1618.050
    Thread adapter 40 mm to GL 45
    Adapter for bottles with 40 mm thread to GL45.

    2 piece(s)

  • Bottle / 50 mL
    6.1620.000
    Bottle / 50 mL

    16 piece(s)

  • Bottle / 500 mL
    6.1620.010
    Bottle / 500 mL

    1 piece(s)

  • Container 10 L
    6.1621.000
    Container 10 L
    As rinsing or waste container in automated systems.

    2 piece(s)

  • FEP tubing / M6 / 40 cm
    6.1805.100
    FEP tubing / M6 / 40 cm
    With light and kink protection

    1 piece(s)

  • FEP tubing / M6 / 100 cm
    6.1805.120
    FEP tubing / M6 / 100 cm
    With light and kink protection

    9 piece(s)

  • FEP tubing / M6 / 16 cm
    6.1805.180
    FEP tubing / M6 / 16 cm
    With light and kink protection

    1 piece(s)

  • PTFE tubing / M8 / 0.5 m
    6.1805.200
    PTFE tubing / M8 / 0.5 m

    1 piece(s)

  • Connection bushing M6
    6.1808.000
    Connection bushing M6

    5 piece(s)

  • PTFE tube
    6.1819.010
    PTFE tube
    As gas inlet in washing bottle of VA Stand

    2 piece(s)

  • Tube
    6.1819.070
    Tube
    PTFE. For M8 threaded holes. For 6.1602.1XX bottle attachments and tall bottles

    1 piece(s)

  • FEP aspiration tube M6, 0.5 m
    6.1829.020
    FEP aspiration tube M6, 0.5 m
    For Dosing Unit

    2 piece(s)

  • Clip for SGJ 14/15
    6.2023.020
    Clip for SGJ 14/15
    Clip for SGJ 14/16

    1 piece(s)

  • Sample vessel 15 mL
    6.2747.000
    Sample vessel 15 mL

    With blue screw cap and mL graduation. Set of 25 pieces.


    4 piece(s)

Ladda ner hela leveransomfattningen och extra tillbehör som PDF

  • 700 Dosino
    2.700.0010
    700 Dosino
    Drive for Dosing Unit, with fixed cable and 9-pin plug (DB9).
  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.