Automatic titration of acids and bases for up to 12 samples

Automatic titration of acids and bases for up to 12 samples
Part Number: MATi 06

Fully automatic system for potentiometric titration of acids and bases in series of up to 12 samples. The titration is carried out directly in the beaker on the rack. Afterwards, the electrode is cleaned automatically using the membrane pumps built into the sample changer and the titration beaker is emptied. The control of this system is handled by the user-friendly tiamo titration software.
 

  • Peças

Faça o download do escopo completo de entrega e acessórios opcionais

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    1 piece(s)

  • 802 Stirrer
    2.802.0020
    802 Stirrer

    Rod stirrer for sample changer and Sample Processor.

    With 6.1909.020 Propeller stirrer 104 mm and fixed cable.

    1 piece(s)

  • 814 USB Sample Processor (1T/2P)
    2.814.0020
    814 USB Sample Processor (1T/2P)

    USB Sample Processor with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with small to medium quantities. In addition to the built-in pumps, up to three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately.
     

     

    1 piece(s)

  • 905 Titrando
    2.905.0010
    905 Titrando

    High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems.
     

    • up to four dosing systems of the 800 Dosino type
    • dynamic (DET), monotonic (MET) and endpoint titration (SET)
    • Measurement with ion-selective electrodes (MEAS CONC)
    • Dosing functions with monitoring, Liquid Handling
    • four MSB connectors for additional stirrers or dosing systems
    • "iTrode" intelligent electrodes
    • USB connector
    • For use with tiamo PC software or Touch Control unit
    • Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required

    1 piece(s)

  • iEcotrode plus
    6.0280.300
    iEcotrode plus

    Intelligent, combined pH electrode with integrated memory chip for storing of sensor data. This electrode is suitable for aqueous acid/base titrations.

    The fixed ground-joint diaphragm is insensitive to contamination.
    Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.
    iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.

    1 piece(s)

  • Sample beaker, clear glass, 250 mL, 1 piece 
    6.1432.320
    Sample beaker, clear glass, 250 mL, 1 piece 

    Sample beaker, clear glass, 250 mL, suitable for sample racks 6.2041.310, 6.2041.400, 6.2041.430, 6.2041.510, 6.2041.820, 6.2068.020 and 6.2068.030, 1 piece
     

    12 piece(s)

  • Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    6.1458.010
    Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    With 6xSGJ 14 and 3x SGJ 9 apertures.

    1 piece(s)

  • Amber glass bottle / 1000 mL / GL 45
    6.1608.023
    Amber glass bottle / 1000 mL / GL 45
    For Exchange Units. Bottle for auxiliary solutions.

    1 piece(s)

  • FEP tubing / M6 / 150 cm
    6.1805.030
    FEP tubing / M6 / 150 cm
    With light and kink protection

    1 piece(s)

  • Sample rack 12 x 250 mL
    6.2041.310
    Sample rack 12 x 250 mL
    Sample rack for 12 x 250 mL, one row

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Buffer solution pH 4 (500 mL)
    6.2307.100
    Buffer solution pH 4 (500 mL)
    Ready-to-use buffer solution pH = 4 (25 °C), colored, with closure seal

    1 piece(s)

  • Buffer solution pH 7 (500 mL)
    6.2307.110
    Buffer solution pH 7 (500 mL)
    Ready-to-use buffer solution pH = 7 (25 °C), colored, with closure seal

    1 piece(s)

  • Buffer solution pH 9 (500 mL)
    6.2307.120
    Buffer solution pH 9 (500 mL)
    Ready-to-use buffer solution pH = 9 (25 °C), colorless, with closure seal

    1 piece(s)

  • pHit kit
    6.2325.000
    pHit kit

    Maintenance kit for pH electrodes

    The kit contains:

    • 50 mL cleaning solution
    • 50 mL 3M KCl solution
    • 50 mL storage solution
    • 2 Storage vessels
    • Instructions for use

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Tiamo 2.5 Light CD: 1 license
    6.6056.251
    Tiamo 2.5 Light CD: 1 license

    tiamo™ 2.5 Light computer program for controlling a titration system.

    • Up to two Metrohm instruments (Titrino, Titrando, etc.) can be connected; balances and other generic (i.e. non-Metrohm) instruments can be included without limitation
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • Data export as PDF file, CSV, SLK
    • No parallel titration
    • No data export in XML format for LIMS
    • Dialog languages: German, English, French, Italian, Spanish, Czech, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

    1 piece(s)