815 Robotic USB Sample Processor XL (2T/2P)

815 Robotic USB Sample Processor XL (2T/2P)
Part Number: 2.815.0110

Robotic USB Sample Processor XL with two workstations and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. In addition to the built-in pumps, up to two additional pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected.

Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.

  • Documentos
  • Peças
  • Opções

Faça o download do escopo completo de entrega e acessórios opcionais

  • Sleeve with SGJ 14/12 mm
    6.1236.020
    Sleeve with SGJ 14/12 mm
    Sleeve with SGJ 14/12 mm and O-ring.

    4 piece(s)

  • SGJ stopper / B-14/(15)
    6.1446.000
    SGJ stopper / B-14/(15)

    10 piece(s)

  • Stopper
    6.1446.010
    Stopper
    Used with Sample Changers

    6 piece(s)

  • Container 10 L
    6.1621.000
    Container 10 L
    As rinsing or waste container in automated systems.

    2 piece(s)

  • FEP tubing / M6 / 60 cm
    6.1805.060
    FEP tubing / M6 / 60 cm
    With light and kink protection

    6 piece(s)

  • FEP tubing / M6 / 80 cm
    6.1805.110
    FEP tubing / M6 / 80 cm
    With light and kink protection

    2 piece(s)

  • 
    PTFE tubing 4 mm / 6 mm / 4 m
    6.1812.000
    PTFE tubing 4 mm / 6 mm / 4 m

    2 piece(s)

  • PVDF connection nipple
    6.1828.000
    PVDF connection nipple

    For 6.1621.000 canister.


    2 piece(s)

  • Cable clip
    6.2053.000
    Cable clip
    Cable clip for fastening cables and tubes

    2 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 
    5 mm hex key for IC Sample Processors
    6.2621.070
    5 mm hex key for IC Sample Processors

    1 piece(s)

  • Hexagon key 2.5 mm
    6.2621.140
    Hexagon key 2.5 mm

    1 piece(s)

  • Guiding sleeve
    6.2709.070
    Guiding sleeve
    For fixation of buret and dosing tips in titration heads and electrode holders

    6 piece(s)

  • Spray nozzle
    6.2740.020
    Spray nozzle

    For the fine-spraying of the rinsing solution.


    6 piece(s)

  • Safety shield
    6.2751.100
    Safety shield


    Safety shield for Sample Processors with 786 Swing Head


    2 piece(s)

Faça o download do escopo completo de entrega e acessórios opcionais

  • 
    772 Pump Unit – aspirate
    2.772.0120
    772 Pump Unit – aspirate

    Peristaltic pump for direct connection to Sample Processors. The "Aspiration" version contains extensive accessories for the aspiration of titered-out solutions.


  • 786 Swing Head with transfer head left
    2.786.0010
    786 Swing Head with transfer head left
    Additional equipment for Robotic Sample Processors XL for transferring / pipetting from small sample vessels into larger titration vessels on the rack or into an external titration cell; this can be located to the left of the work station.
  • 786 Swing Head with transfer head right
    2.786.0020
    786 Swing Head with transfer head right
    Additional equipment for Robotic Sample Processors XL for transferring / pipetting from small sample vessels into larger titration vessels on the rack or into an external titration cell; this can be located to the right of the work station.
  • 786 Swing Head with titration swing arm, left- or right-swinging
    2.786.0030
    786 Swing Head with titration swing arm, left- or right-swinging
    Additional equipment for Robotic Sample Processors XL for direct titration in sample vessels of 75 mL and more.
  • 786 Swing Head
    2.786.0040
    786 Swing Head
    Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
  • 
    801 Stirrer
    2.801.0010
    801 Stirrer

    Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).


  • 802 Stirrer
    2.802.0020
    802 Stirrer

    Rod stirrer for sample changer and Sample Processor.

    With 6.1909.020 Propeller stirrer 104 mm and fixed cable.

  • 802 Stirrer (propeller stirrer) for 804 Ti Stand
    2.802.0040
    802 Stirrer (propeller stirrer) for 804 Ti Stand
    Rod stirrer with 6.1909.010 Propeller stirrer.
  • 804 Ti Stand with stand
    2.804.0040
    804 Ti Stand with stand
    Titration stand and controller for 802 Rod Stirrer. The 804 Ti Stand together with the optional 802 Rod Stirrer provides an alternative to the magnetic stirrer. Ti Stand with base plate, support rod and electrode holder.
  • 823 Membrane Pump Unit «aspirate»
    2.823.0020
    823 Membrane Pump Unit «aspirate»

    Membrane pump for direct connection to Sample Processors. The «Aspiration» version contains numerous accessories for aspirating off solutions.

  • 849 Level Control
    2.849.0010
    849 Level Control
    Additional equipment for Sample Processors for monitoring the filling level of rinsing or waste canisters via Remote. Prevents pumps from running dry and/or canisters from overflowing and is suitable for use with aqueous solutions, solvents and suspensions.
  • Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    6.1458.010
    Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    With 6xSGJ 14 and 3x SGJ 9 apertures.
  • 
    Titration head /4 x M10 connectors
    6.1458.020
    Titration head /4 x M10 connectors

    With 4 M10 screw nipples, including stoppers.


  • 
    KF titration head /4 x M10 connectors
    6.1458.030
    KF titration head /4 x M10 connectors

    With 4 M10 screw nipples, including stoppers.


  • Titration Head, 3 x SGJ 14
    6.1458.040
    Titration Head, 3 x SGJ 14
    Titration head for 120 mL beakers. With 3 openings SGJ 14 and 4 openings 6.4 mm, 2 dosing tips included. Suitable for rinsing and aspiration equipment.
  • Titration head / 2 x SGJ 14
    6.1458.070
    Titration head / 2 x SGJ 14
    Titration head for 75 mL beakers. With 2 openings SGJ 14, 2 openings 6.4 mm, 1 opening M10 and 3 pre-mounted dosing tips. Suitable for rinsing and aspiration equipment.
  • Robotic arm with transfer head for 786 Swing Head, left swinging
    6.1462.030
    Robotic arm with transfer head for 786 Swing Head, left swinging
    Transfer robotic arm for liquid handling purposes
  • Robotic arm with transfer head for 786 Swing Head, right swinging
    6.1462.040
    Robotic arm with transfer head for 786 Swing Head, right swinging
    Transfer robotic arm for liquid handling purposes
  • Robotic arm with titration head for 786 Swing Head, left or right swinging
    6.1462.050
    Robotic arm with titration head for 786 Swing Head, left or right swinging
    Titration head for Swing Head
  • Robotic arm with holder for titration head, left swinging
    6.1462.060
    Robotic arm with holder for titration head, left swinging
    Titration head holder to 786 Swing Head
  • Robotic arm with holder for titration head, right swinging
    6.1462.070
    Robotic arm with holder for titration head, right swinging
    Titration head holder to 786 Swing Head
  • Robotic DIS-COVER
    6.1462.080
    Robotic DIS-COVER
  • Robotic arm with Luer-Lock adapter for 786 Swing Head, right swinging
    6.1462.090
    Robotic arm with Luer-Lock adapter for 786 Swing Head, right swinging
    Transfer robotic arm for liquid handling
  • Robotic arm with titration head and beaker sensor for 786 Swing Head, left or right-swinging
    6.1462.150
    Robotic arm with titration head and beaker sensor for 786 Swing Head, left or right-swinging
    Titration head with beaker sensor for 786 Swing Head, 2 x M10, 1 x SGJ 14.5, 2 x buret tip
  • Robotic arm with holder for titration head and sensor for 786 Swing Head, left swinging
    6.1462.160
    Robotic arm with holder for titration head and sensor for 786 Swing Head, left swinging
    Titration head holder with beaker sensor for 786 Swing Head
  • Robotic arm with holder for titration head and sensor for 786 Swing Head, right swinging
    6.1462.170
    Robotic arm with holder for titration head and sensor for 786 Swing Head, right swinging
    Titration head holder with beaker sensor for 786 Swing Head
  • Robotic arm with holder for titration head, left swinging, external
    6.1462.260
    Robotic arm with holder for titration head, left swinging, external
    Titration head holder for 786 Swing Head with possibility of swinging to external positions
  • Support stand for Sample Processors
    6.2001.070
    Support stand for Sample Processors
    Support stand for Sample Processors, for external titrations and dilutions (IC)
  • Sample rack 48 x 75 mL
    6.2041.350
    Sample rack 48 x 75 mL
    Sample rack for 48 x 75 mL samples, two-row
  • Sample rack 126 x 11 mL
    6.2041.400
    Sample rack 126 x 11 mL
    Sample rack for 126 x 11 mL samples, multi-row
  • Sample rack 141 x 11 mL
    6.2041.410
    Sample rack 141 x 11 mL

    Sample rack for 141 x 11 mL samples, multi-row.

  • Sample rack 127 x 11 mL
    6.2041.430
    Sample rack 127 x 11 mL

    Sample rack for 127 x 11 mL samples with 2 rinsing beakers.

  • Sample rack 148 x 11 mL + 3 x 300 mL
    6.2041.440
    Sample rack 148 x 11 mL + 3 x 300 mL

    Sample rack for 148 x 11 mL samples with 3 rinsing beakers.

  •  Sample rack 56 x 11 mL + 56 x 50 mL
    6.2041.450
    Sample rack 56 x 11 mL + 56 x 50 mL

    Multi-row sample rack for 56 samples in 11 mL sample vessels (6.2743.050) and 56 samples in sample vessels of 50 mL (6.2747.010).


  • Sample rack 160 x 6 mL
    6.2041.710
    Sample rack 160 x 6 mL
    Sample rack 160 x 6 mL vials
  • Sample rack 100 x 75 mL
    6.2041.800
    Sample rack 100 x 75 mL
    Sample rack for 100 x 75 mL samples, multi-row
  • Sample rack 34 x 150 mL
    6.2041.810
    Sample rack 34 x 150 mL
    Sample rack for 34 x 150 mL samples, multi-row
  • Sample rack 28 x 250 mL
    6.2041.820
    Sample rack 28 x 250 mL
    Sample rack for 28 x 250 mL samples (6.1432.320), multi-row
  • Sample rack 28 x 200 mL
    6.2041.830
    Sample rack 28 x 200 mL
    Sample rack for 28 x 200 mL samples (6.1459.310), multi-row
  • Sample rack 59 x 120 mL
    6.2041.840
    Sample rack 59 x 120 mL
    Sample rack for 59x120 mL samples (6.1459.300), multi-row
  • Sample rack 59 x 120 mL, PP
    6.2041.850
    Sample rack 59 x 120 mL, PP
    Sample rack for 59x120 mL samples (6.1459.300), multi-row
  • Sample rack insert 54 x 75 mL for water bath
    6.2041.900
    Sample rack insert 54 x 75 mL for water bath
    Insert for waterbath rack 54 x 75 mL
  • Head extension 30 mm for Sample Processors
    6.2058.020
    Head extension 30 mm for Sample Processors
    Head extension 30 mm for 789, 815 Sample Processors.
  • Head extension 10 mm for Sample Processors
    6.2058.030
    Head extension 10 mm for Sample Processors
    Head extension for use with the waterbath rack.
  • Tower extension for Sample Processors
    6.2058.110
    Tower extension for Sample Processors
    Height extension 130 mm fpr Sample Processors.Tower extension for COD applications.
  • Remote cable 843 Pump Station to Sample Processor
    6.2141.300
    Remote cable 843 Pump Station to Sample Processor
    Remote cable for the direct connection of the 843 Pump Station to the pump connectors of the Sample Processors
  • Remote Box MSB
    6.2148.010
    Remote Box MSB
    Additional remote interface for the connection of devices that can be controlled via remote lines. With permanently attached cable.
  • Drip pan for 789/815/855
    6.2711.070
    Drip pan for 789/815/855
    Drip pan for 789, 815, 855 Robotic Sample Processors XL
  • Water bath for Robotic Sample Processors and Robotic Titrosampler
    6.2840.000
    Water bath for Robotic Sample Processors and Robotic Titrosampler
    Water bath rack for Robotic Sample Processors and Titrosampler.
  • 
    External Polytron rinsing station for Robotic Sample Processors
    6.2841.000
    External Polytron rinsing station for Robotic Sample Processors

    The external rinsing station can be fitted on the side next to the Robotic Sample Processor tower, making it possible for external cleaning of the Polytron to be carried out during additional actions on the sample rack.


  • 
    External rinsing station for robotic arm with 6.1458.040 titration head
    6.2841.010
    External rinsing station for robotic arm with 6.1458.040 titration head

    The external rinsing station can be fitted on the side next to the Robotic Sample Processor tower, making it possible for external cleaning of the titration equipment to be carried out during additional actions on the sample rack.


  • Transfer equipment, 0.5 - 2 mL, for 789/815
    6.5619.000
    Transfer equipment, 0.5 - 2 mL, for 789/815
    Complete equipment for the transfer of solutions from 0.5 to 2.0 mL on the Robotic Sample Processor.
  • tiamo™ 2.3 Light CD: 1 license
    6.6056.231
    tiamo™ 2.3 Light CD: 1 license

    tiamo™ 2.3 Light computer program for controlling a titration system.

    • Up to two instruments can be connected
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • No parallel titration, no data export
    • Dialog languages: German, English, French, Italian, Spanish, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

  • tiamo™ 2.3 Full CD: 1 license
    6.6056.232
    tiamo™ 2.3 Full CD: 1 license

    Computer program for controlling complex titration systems.

    • Graphical method editor with numerous templates
    • Layout manager for individual screen surface
    • Professional database with reevaluation
    • Export to LIMS, NuGenesis, Cyberlab, etc.
    • High-performance Report Generator
    • In compliance with the directives according to FDA 21 CFR Part 11
    • Parallel titration
    • Dialog languages: German, English, French, Italian, Spanish, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese and Traditional Chinese

     

  • tiamo™ 2.3 Multi CD: 3 licenses
    6.6056.233
    tiamo™ 2.3 Multi CD: 3 licenses

    Client/server-compatible computer program for controlling complex titration systems.

    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Client/server database
    • Professional database with reevaluation
    • Export to LIMS, NuGenesis, Cyberlab, etc.
    • High-performance report generator
    • In compliance with the directives according to FDA 21 CFR Part 11
    • Parallel titration
    • Dialog languages: German, English, French, Italian, Spanish, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese and Traditional Chinese