Flow Cell in PEEK for Screen-Printed Electrodes

Flow Cell in PEEK for Screen-Printed Electrodes
Part Number: FLWCL-PEEK

PEEK wall-jet Flow-Cell for FIA. Suitable to be used with standard format Screen-Printed Electrodes with the electrochemical cell in the middle of the strip. Closing system with powerful magnets. Fittings included.

  • Documentos
  • Opções

Faça o download do escopo completo de entrega e acessórios opcionais

  • Screen-Printed Gold Electrode (Aux.:Pt; Ref.:Ag) / Ink BT
    250BT
    Screen-Printed Gold Electrode (Aux.:Pt; Ref.:Ag) / Ink BT

    Screen-Printed Gold Electrode (Aux.:Pt; Ref.:Ag) / Ink BT. Suitable for working with microvolumes, for decentralized assays or to develop specific sensors.

  • Screen-Printed Prussian Blue/Carbon Electrode
    710
    Screen-Printed Prussian Blue/Carbon Electrode

    Screen-Printed Prussian Blue/Carbon Electrode. Ideal for the determination of hydrogen peroxide at a low detection potential.

  • Screen-Printed Gold Electrode (Aux.:Au; Ref.:Ag) d. 1.6 / Ink AT 
    C223AT
    Screen-Printed Gold Electrode (Aux.:Au; Ref.:Ag) d. 1.6 / Ink AT 

    Screen-Printed Gold Electrode (Aux.:Au; Ref.:Ag) / Ink AT. Working Electrode of 1.6 mm diameter.  

  • Cable connector for Screen-Printed Electrodes
    CAC
    Cable connector for Screen-Printed Electrodes

    Connects DropSens Screen-Printed Electrodes to any kind of potentiostat. Recommended when working in batch or flow analysis.

  • μStat Cable connector for Screen-Printed Electrodes
    CAST
    μStat Cable connector for Screen-Printed Electrodes

    Connects any DropSens equipment with DropSens Screen-Printed Electrodes