TitrIC pro I - The basic hyphenated system for IC and titration

TitrIC pro I - The basic hyphenated system for IC and titration
Part Number: TitrIC pro I

TitrIC pro I – the Basic System

Fully automated system for direct measurement of temperature, conductivity, and pH value; the titrimetric determination of p value, m value, calcium, and magnesium, and the determination of anions using ion chromatography.

The system consists of the 856 Conductivity Module, four 800 Dosinos, 802 Stirrer (rod stirrer), 905 Titrando, 815 Robotic USB Sample Processor XL, and 881 Compact IC pro with sequential suppression and the IC Conductivity Detector "iDetector".

TitrIC – the power pack for ion analysis.

 

Installation instructions

  • Especificações Técnicas
  • Peças

This is what TitrIC can do

Direct measurements with TitrIC

  • pH value
  • Temperature
  • Conductivity

Titrations with TitrIC

  • p value
  • m value
  • Calcium
  • Magnesium

Anion IC with TitrIC

  • Fluoride
  • Chloride
  • Bromide
  • Nitrite
  • Nitrate
  • Phosphate
  • Sulfate
  • ...

 

Faça o download do escopo completo de entrega e acessórios opcionais

  • 786 Swing Head
    2.786.0040
    786 Swing Head
    Additional equipment for Robotic Sample Processors XL without titration or transfer heads.

    1 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    4 piece(s)

  • 802 Stirrer
    2.802.0020
    802 Stirrer

    Rod stirrer for sample changer and Sample Processor.

    With 6.1909.020 Propeller stirrer 104 mm and fixed cable.

    1 piece(s)

  • 815 Robotic USB Sample Processor XL (1T/2P)
    2.815.0020
    815 Robotic USB Sample Processor XL (1T/2P)

    Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.
     

    1 piece(s)

  • 
    IC Conductivity Detector
    2.850.9010
    IC Conductivity Detector

    Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.


    1 piece(s)

  • 856 Conductivity Module
    2.856.0010
    856 Conductivity Module

    Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells.
    Thanks to the galvanically isolated measuring input, pH value and conductivity can be measured in the same beaker without interference.

    The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos.
    Both in conjunction with the 900 Touch Control as stand-alone instrument and also integrated in tiamo™ full (from 2.0), it is in compliance with GLP and FDA 21 CFR part 11 requirements.

    1 piece(s)

  • 905 Titrando
    2.905.0010
    905 Titrando

    High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems.
     

    • up to four dosing systems of the 800 Dosino type
    • dynamic (DET), monotonic (MET) and endpoint titration (SET)
    • Measurement with ion-selective electrodes (MEAS CONC)
    • Dosing functions with monitoring, Liquid Handling
    • four MSB connectors for additional stirrers or dosing systems
    • "iTrode" intelligent electrodes
    • USB connector
    • For use with tiamo PC software or Touch Control unit
    • Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required

    1 piece(s)

  • iAquatrode plus with Pt1000
    6.0277.300
    iAquatrode plus with Pt1000

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data and with Pt1000 temperature sensor for pH measurements/titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples.

    The fixed ground-joint diaphragm is insensitive to contamination.
    When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.
    The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)). Storage in the used bridge electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

    1 piece(s)

  • combined polymer membrane electrode, Ca
    6.0510.100
    combined polymer membrane electrode, Ca

    Combined calcium-selective electrode with polymer membrane.
    This ISE is suitable for:
     

    • ion measurements of Ca2+ (5*10-7 to 1 mol/L) in aqueous solutions
    • complexometric (back) titrations (e.g., determination of water hardness)
       

    Thanks to a robust/break-proof plastic shaft made of propylene and an impact protection for the polymer membrane, this sensor is mechanically very resistant.
    The reference electrolyte used is c(NH4NO3) = 1 mol/L.

    1 piece(s)

  • 5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)
    6.0915.100
    5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)

    5-ring conductivity measuring cell with cell constant c = 0.7 cm-1, with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.
    This sensor is suitable for measurements of medium conductivities (5 uS/cm to 20 mS/cm), e.g., in:

    • drinking water
    • surface water
    • wastewater

    1 piece(s)

  • Micro titration vessel lid ECO
    6.1414.060
    Micro titration vessel lid ECO

    1 piece(s)

  • Titration vessel / 50-150 mL
    6.1415.250
    Titration vessel / 50-150 mL

    1 piece(s)

  • Robotic arm with transfer head for 786 Swing Head, right swinging
    6.1462.040
    Robotic arm with transfer head for 786 Swing Head, right swinging
    Transfer robotic arm for liquid handling purposes

    1 piece(s)

  • Aspiration tip / M8 thread
    6.1543.170
    Aspiration tip / M8 thread

    Aspiration tip for the Sample Processors.


    1 piece(s)

  • 3-way stopper with antidiffusion valve
    6.1543.210
    3-way stopper with antidiffusion valve
    Stopper with three buret tips for connecting 3 x M6 tubing

    1 piece(s)

  • Round glass bottle / 1000 mL / GL 45
    6.1608.030
    Round glass bottle / 1000 mL / GL 45

    3 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    1 piece(s)

  • FEP tubing / M6 / 150 cm
    6.1805.030
    FEP tubing / M6 / 150 cm
    With light and kink protection

    1 piece(s)

  • FEP tubing / M6 / 60 cm
    6.1805.060
    FEP tubing / M6 / 60 cm
    With light and kink protection

    3 piece(s)

  • FEP tubing / M6 / 80 cm
    6.1805.110
    FEP tubing / M6 / 80 cm
    With light and kink protection

    2 piece(s)

  • Coupling piece 2 X M6
    6.1808.010
    Coupling piece 2 X M6
    2 M6 outer threads. Part of the screw connections for Exchange Units and 676 Sample Changer

    1 piece(s)

  • 
    T connector / M6 inner
    6.1808.060
    T connector / M6 inner

    3 M6 inner threads.


    1 piece(s)

  • 
            
    Adapter Dosino port 4, M6 inner
    6.1808.280
    Adapter Dosino port 4, M6 inner


    Adapter for use with Dosino port 4 in IC. For connecting to M6 connector.


    1 piece(s)

  • 
    PEEK sample tube
    6.1835.050
    PEEK sample tube
    For sample changers for transferring larger-sized sample volumes, e.g. for brightener determination.

    1 piece(s)

  • Support stand for Sample Processors
    6.2001.070
    Support stand for Sample Processors
    Support stand for Sample Processors, for external titrations and dilutions (IC)

    1 piece(s)

  • Holder for Dosino to IC instruments
    6.2057.210
    Holder for Dosino to IC instruments
    Mounting part for Dosinos at the IC instrument housing.

    1 piece(s)

  • Bottle holder for Dosinos
    6.2061.010
    Bottle holder for Dosinos
    Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.

    1 piece(s)

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).

    1 piece(s)

  • RS-232 DB9 - IBM-PC(DB9) connecting cable
    6.2134.040
    RS-232 DB9 - IBM-PC(DB9) connecting cable

    For the Metrohm RS-232 interface - PC connection. For Titrinos, Titrino plus and 756, 831 KF Coulometer, RS-232/USB Box

    1 piece(s)

  • USB/RS-232 Converter for 900 Touch Control
    6.2148.050
    USB/RS-232 Converter for 900 Touch Control
    Extends the 900 Touch Control by an RS-232 interface for the connection of e.g. balance. 

    2 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    2 piece(s)

  • Buffer solutions pH 4, 7 and 9
    6.2307.230
    Buffer solutions pH 4, 7 and 9
    Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL

    1 piece(s)

  • pHit kit
    6.2325.000
    pHit kit

    Maintenance kit for pH electrodes

    The kit contains:

    • 50 mL cleaning solution
    • 50 mL 3M KCl solution
    • 50 mL storage solution
    • 2 Storage vessels
    • Instructions for use

    1 piece(s)

  • Electrolyte NH4NO3 1 mol (50 mL)
    6.2327.000
    Electrolyte NH4NO3 1 mol (50 mL)
    Electrolyte solution c(NH4NO3) =1 mol/L (for combined Ca-ISE 6.0510.100)

    1 piece(s)

  • Screw nut to needle holder IC
    6.2629.000
    Screw nut to needle holder IC
    On Sample Processors

    1 piece(s)

  • Stopper
    6.2709.090
    Stopper
    PTFE. Used with 6.5613.000 ECO titration equipment

    1 piece(s)

  • Septum stopper
    6.2730.020
    Septum stopper
    With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.

    1 piece(s)

  • Stopper
    6.2730.030
    Stopper

    Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.

    5 piece(s)

  • Screw nipple
    6.2730.060
    Screw nipple
    PCTFE. With M16 thread. Used with 6.5613.000 ECO titration equipment

    3 piece(s)

  • Screw nipple
    6.2730.080
    Screw nipple
    PCTFE. Used with 6.5613.000 ECO titration equipment with 722 Stirrer

    1 piece(s)

  • Pressure screw short
    6.2744.070
    Pressure screw short
    Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries

    1 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    2 piece(s)

  • Flow-through cell for the 6.0915.100/6.0920.100
    6.2763.000
    Flow-through cell for the 6.0915.100/6.0920.100

    Flow-through cell for the 6.0915.100/6.0920.100 5-ring conductivity measuring cell

    1 piece(s)

  • Needle holder 1/8 in. With tubing connection M6
    6.2833.020
    Needle holder 1/8 in. With tubing connection M6
    For Sample Processors. For the connection of FEP tubing with M6 connectors

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    2 piece(s)

  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • tiamo™ 2.3 Light CD: 1 license
    6.6056.231
    tiamo™ 2.3 Light CD: 1 license

    tiamo™ 2.3 Light computer program for controlling a titration system.

    • Up to two instruments can be connected
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • No parallel titration, no data export
    • Dialog languages: German, English, French, Italian, Spanish, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

    1 piece(s)