Water Analysis Complete

Water Analysis Complete
Part Number: 2.850.8130

Package for the straightforward determination of standard anions, oxyhalides and cations in drinking water, waste water etc. The package Water Analysis Complete includes the 850 Professional IC AnCat – MCS (2.850.3030), 2 x IC Conductivity Detectors, 858 Professional Sample Processor (2.8580.020) with rack and vials and the Metrosep C 4 -150/4.0 plus guard column. Additionally for free comes the MagIC Net™ Professional Software, the ultrafiltration equipment, the Metrosep A Supp 7 - 250/4.0 column plus the Inline Eluent Preparation equipment. The scope of delivery of the two main instruments is adjusted to fit the applications.

  • Peças
  • Opções

Faça o download do escopo completo de entrega e acessórios opcionais

  • Metrosep A Supp 7 - 250/4.0
    6.1006.630
    Metrosep A Supp 7 - 250/4.0

    Disinfection byproducts from water treatment are suspected not only of being health hazards but even of being carcinogenic. Oxyhalides have therefore become the subject of many investigations and standards (e.g., EPA 300.1 Part B, EPA 317.0, EPA 326.0). Of primary concern is bromate, which forms from bromide during the ozonization of drinking water. The Metrosep A Supp 7 - 250/4.0 is a high-performance separation column for the parallel determination of standard anions, oxohalides and dichloroacetic acid. With this column, these ions are determined with certainty and precision down to the lower µg/L range. The high detection sensitivity is achieved through the use of the 5 µm polyvinyl alcohol polymer, with which extremely high plate numbers and thus outstanding separation and detection properties are achieved. In addition, the separation can be adapted to the specific requirements of the application by modifying the temperature.

    1 piece(s)

  • Metrosep RP 2 Guard/3.5
    6.1011.030
    Metrosep RP 2 Guard/3.5
    General guard column. For Metrosep Anion Dual 2 and Dual 3 in particular.

    1 piece(s)

  • Metrosep C 4 - 150/4.0
    6.1050.420
    Metrosep C 4 - 150/4.0

    The Metrosep C 4 - 150/4.0 is the universal standard column in cation analysis for accomplishing high separating efficiency in a short time. The Metrosep C 4 - 150/4.0 is the ideal separation column for the analysis of alkaline and earth alkaline metals in aqueous media.

    1 piece(s)

  • Metrosep C 4 Guard/4.0
    6.1050.500
    Metrosep C 4 Guard/4.0


    The Metrosep C 4 Guard/4.0 contains the C-4 column material and is used to protect all Metrosep cation columns that have a substrate based on silica gel. Particles and contaminations are reliably retained, allowing the lifetime of the analytical separation column to be prolonged considerably. The economical price is an additional plus. The Metrosep C 4 Guard/4.0 also functions according to the "On Column Guard System" and is screwed directly onto the separation column with nearly no dead volume.


    1 piece(s)

  • 
    Bottle attachment / GL 45 - 3 x UNF 10/32
    6.1602.150
    Bottle attachment / GL 45 - 3 x UNF 10/32

    For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.


    2 piece(s)

  • 
            
    Eluent bottle cap GL 45
    6.1602.160
    Eluent bottle cap GL 45
    For eluent bottles, with connectors for the adsorber tube and the aspiration tubing.

    2 piece(s)

  • Attachment 5 x UNF 10/32 for «Waste Collector»
    6.1602.210
    Attachment 5 x UNF 10/32 for «Waste Collector»

    Attachment for holding up to 5 waste capillaries.

    1 piece(s)

  • Glass bottle / 1000 mL / GL 45
    6.1608.020
    Glass bottle / 1000 mL / GL 45

    Bottle for auxiliary solutions.

    2 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    2 piece(s)

  • Bottle / 300 mL
    6.1608.080
    Bottle / 300 mL

    Rinsing vessel for IC Sample Processors.

    3 piece(s)

  • Adsorbing tube, large and bent
    6.1609.000
    Adsorbing tube, large and bent
    For filling with adsorber material.

    2 piece(s)

  • PTFE capillary 0.97 mm i.d. / 5 m
    6.1803.020
    PTFE capillary 0.97 mm i.d. / 5 m
    For all IC instruments

    1 piece(s)

  • PTFE capillary 0.5 mm i.d. / 3 m
    6.1803.030
    PTFE capillary 0.5 mm i.d. / 3 m
    Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    1 piece(s)

  • PTFE capillary 0.5 mm i.d. / 1 m
    6.1803.040
    PTFE capillary 0.5 mm i.d. / 1 m
    Capillary for sample handling in IC.

    1 piece(s)

  • PTFE capillary 0.5 mm i.d. / 20 cm
    6.1803.050
    PTFE capillary 0.5 mm i.d. / 20 cm
    Capillary for inline dialysis and filtration, for Dialysis Unit, IC Filtration Sample Processor

    1 piece(s)

  • PTFE capillary 0.97 mm i.d. / 20 cm
    6.1803.060
    PTFE capillary 0.97 mm i.d. / 20 cm
    Capillary for filtration, for IC Filtration Sample Processor

    1 piece(s)

  • PTFE capillary 0.97 mm i.d. / 1 m
    6.1803.080
    PTFE capillary 0.97 mm i.d. / 1 m
    Capillary for filtration, for IC Filtration Sample Processor, IC Liquid Handling Filtration Unit

    2 piece(s)

  • Y-connector for tubing 6-9 mm i.d.
    6.1807.010
    Y-connector for tubing 6-9 mm i.d.
    Connector for waste tubing

    1 piece(s)

  • Spiral band 0.5 m
    6.1815.010
    Spiral band 0.5 m
    For holding together different cables or tubing.

    1 piece(s)

  • Silicone tubing 6 mm i.d., 1 m
    6.1816.020
    Silicone tubing 6 mm i.d., 1 m
    For waste tubing.

    2 piece(s)

  • Silicone tubing 6 mm i.d. /  2 m
    6.1816.080
    Silicone tubing 6 mm i.d. /  2 m


    Drainage tubing to the "Waste Collector".


    1 piece(s)

  • Pump tubing LFL (orange/yellow) , 3-stopper
    6.1826.320
    Pump tubing LFL (orange/yellow) , 3-stopper

    For suppressor solutions and for acceptor solutions for inline dialysis and for inline ultrafiltration.


    4 piece(s)

  • Pump tubing LFL (white/white), 3 stoppers
    6.1826.360
    Pump tubing LFL (white/white), 3 stoppers
    For Sample Processors

    2 piece(s)

  • Pump tubing LFL (yellow/yellow), 3 stoppers
    6.1826.390
    Pump tubing LFL (yellow/yellow), 3 stoppers
    For the sample solution in Inline Ultrafiltration.

    2 piece(s)

  • PEEK capillary 0.5 mm i.d., 1 m
    6.1831.060
    PEEK capillary 0.5 mm i.d., 1 m
    For inline dialysis and for Sample Changers. For IC Dialysis Unit, IC Sample Processor, Compact IC Autosampler, IC Filtration Sample Processor, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    2 piece(s)

  • PEEK capillary, 0.5 mm ID / 70 cm
    6.1831.160
    PEEK capillary, 0.5 mm ID / 70 cm

    1 piece(s)

  • Clip for SGJ 14/15
    6.2023.020
    Clip for SGJ 14/15
    Clip for SGJ 14/16

    2 piece(s)

  • Sample rack 148 x 11 mL + 3 x 300 mL
    6.2041.440
    Sample rack 148 x 11 mL + 3 x 300 mL

    Sample rack for 148 x 11 mL samples with 3 rinsing beakers.

    1 piece(s)

  • Holder for the ultrafiltration cell for the IC Sample Processor
    6.2057.030
    Holder for the ultrafiltration cell for the IC Sample Processor

    Holder for the ultrafiltration cell on the IC Sample Processor.

    1 piece(s)

  • Adsorption cartridge holder (ProfIC)
    6.2057.080
    Adsorption cartridge holder (ProfIC)
    Holder to install adsorption cartridges in Professional IC Instruments

    1 piece(s)

  • Ultrafiltration cell holder
    6.2057.140
    Ultrafiltration cell holder

    Holder for the ultrafiltration cell in Professional IC instruments

    1 piece(s)

  • 
    Holder to Waste Collector
    6.2057.220
    Holder to Waste Collector

    Holder for fastening the Waste Collector to the IC instrument.


    1 piece(s)

  • Beaker retainer for Advanced IC Sample Processor
    6.2064.000
    Beaker retainer for Advanced IC Sample Processor
    Retaining plate for 838 Advanced Sample Processors. For holding 2.5 or 11 mL vials.

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Cable USB A - USB B  1.8 m
    6.2151.020
    Cable USB A - USB B 1.8 m
    USB connecting cable

    1 piece(s)

  • Colored sleeves for capillaries
    6.2251.000
    Colored sleeves for capillaries
    Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.

    1 piece(s)

  • Tool for piston seal
    6.2617.010
    Tool for piston seal
    For removing and assembling the piston seal for all standard pump heads

    1 piece(s)

  • Adjustable wrench
    6.2621.000
    Adjustable wrench
    Max. opening: 20 mm. For IC instruments

    2 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 1/4 in. wrench
    6.2621.050
    1/4 in. wrench
    For 1/4 in. screws. For IC instruments

    1 piece(s)

  • 
    5 mm hex key for IC Sample Processors
    6.2621.070
    5 mm hex key for IC Sample Processors

    1 piece(s)

  • Capillary cutter
    6.2621.080
    Capillary cutter
    For plastic capillaries. Used with IC instruments

    1 piece(s)

  • 
    3 mm hex key for IC Sample Processors
    6.2621.100
    3 mm hex key for IC Sample Processors

    1 piece(s)

  • Tool set for Advanced IC Sample Processors
    6.2621.300
    Tool set for Advanced IC Sample Processors
    Tool set consisting of open-end wrenches and hexagon keys.

    1 piece(s)

  • Drain nozzle (ProfIC)
    6.2626.000
    Drain nozzle (ProfIC)
    Drain nozzle for Professional IC instruments, for mounting on front panel

    1 piece(s)

  • Filtration membrane 1
    6.2714.020
    Filtration membrane 1
    Nominal pore size : 0.2 µm. Set of 50 pieces. For inline filtration

    1 piece(s)

  • Ultrafiltration cell
    6.2729.110
    Ultrafiltration cell
    With 3 x 6.2744.060 Blind stoppers. For inline filtration

    1 piece(s)

  • Wrench
    6.2739.000
    Wrench
    For tightening connectors

    2 piece(s)

  • Sample tubes 11 mL
    6.2743.057
    Sample tubes 11 mL
    200 pieces. For IC Sample Processors and VA Autosampler

    1 piece(s)

  • Stopper with perforation
    6.2743.077
    Stopper with perforation
    200 pieces. For IC Sample Processors

    1 piece(s)

  • Stopper for overflow (ProfIC), 5 pieces
    6.2743.080
    Stopper for overflow (ProfIC), 5 pieces
    For Professional IC instruments

    1 piece(s)

  • Pressure screw PVDF
    6.2744.000
    Pressure screw PVDF
    With UNF 10/32 connection. For IC instruments, inline dialysis (connection of PTFE capillaries)

    1 piece(s)

  • Pressure screw 5x
    6.2744.010
    Pressure screw 5x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    1 piece(s)

  • Pressure screw 2x
    6.2744.014
    Pressure screw 2x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    2 piece(s)

  • Luer/UNF coupling
    6.2744.020
    Luer/UNF coupling
    For IC instruments

    2 piece(s)

  • Coupling olive/UNF 10/32, 4x
    6.2744.030
    Coupling olive/UNF 10/32, 4x
    Connection between pressure screw and pump tubing. 4 pieces. For IC instruments with peristaltic pump

    1 piece(s)

  • Coupling olive/UNF 10/32, 2x
    6.2744.034
    Coupling olive/UNF 10/32, 2x

    Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.

    2 piece(s)

  • 2 x UNF 10/32 coupling
    6.2744.040
    2 x UNF 10/32 coupling
    For connecting 1/16 in. capillaries. For IC instruments

    3 piece(s)

  • Pressure screw short
    6.2744.070
    Pressure screw short
    Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries

    5 piece(s)

  • Pressure screw long
    6.2744.090
    Pressure screw long
    Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)

    3 piece(s)

  • Nozzle/UNF 10/32 coupling with security device
    6.2744.160
    Nozzle/UNF 10/32 coupling with security device
    Security device for connecting pump tubing to a nozzle.

    4 piece(s)

  • Pump tubing connector with security lock and filter
    6.2744.180
    Pump tubing connector with security lock and filter
    For the connection of a pump tubing and a capillary with built-in filter

    2 piece(s)

  • Tubing adaptor for aspiration filter (ProfIC)
    6.2744.210
    Tubing adaptor for aspiration filter (ProfIC)
    For Professional IC instruments

    2 piece(s)

  • Safety shield
    6.2751.110
    Safety shield


    Safety shield for the Advanced IC/VA Sample Processors.


    1 piece(s)

  • Container with GL 45 drainage to the "Waste Collector"
    6.2765.000
    Container with GL 45 drainage to the "Waste Collector"


    Container with drainage to the "Waste Collector".


    1 piece(s)

  • Syringe 10 mL with Luer connection
    6.2816.020
    Syringe 10 mL with Luer connection
    For various applications in IC and VA

    2 piece(s)

  • Purge tubing
    6.2816.040
    Purge tubing
    With PTFE tubing and Luer connection. For syringes. For aspirating eluents.

    1 piece(s)

  • Aspiration filter
    6.2821.090
    Aspiration filter
    Pore size 20 µm, set of 5 pieces. For 6.1834.000 Aspiration tubing and 6.1821.040 and 6.1821.050 Filter tubes.

    2 piece(s)

  • Spare filter for inline filter
    6.2821.130
    Spare filter for inline filter
    Spare filter for inline filter.

    2 piece(s)

  • Plastic tweezers
    6.2831.010
    Plastic tweezers
    For dialysis and filtration membranes

    1 piece(s)

  • H2O adsorption cartridge
    6.2837.010
    H2O adsorption cartridge
    To CO2 Suppressor. Water adsorption cartridge for the aspirated air.

    2 piece(s)

  • 
    Sample needle made of zirconium oxide
    6.2846.000
    Sample needle made of zirconium oxide

    Sample needle for Sample Processors and Autosampler in ion chromatography and voltammetry.


    1 piece(s)

Faça o download do escopo completo de entrega e acessórios opcionais

  • IQ/OQ Kit for IC
    6.5333.000
    IQ/OQ Kit for IC
    The IQ/OQ Kit contains all parts and standard solutions required for IQ/OQ in ion chromatography.