Pharm Titrando

Pharm Titrando
Part Number: 2.836.1020
The Pharm Titrando is based on the 836 Titrando and offers you a complete package for the most common analyses of pharmaceutical products. Apart from the titration software tiamoTM full and determination methods described in detail, you will also receive comprehensive accessories for your titrations.
  • Documentos
  • Peças

Faça o download do escopo completo de entrega e acessórios opcionais

  • Solvotrode easyClean (fixed cable 1.2 m)
    6.0229.010
    Solvotrode easyClean (fixed cable 1.2 m)

    Combined pH electrode with flexible easyClean diaphragm and fixed cable (1.2 m) for all non-aqueous acid/base titrations.
    The glass membrane is optimized for poorly conducting solutions, and thanks to the easy-to-clean easyClean diaphragm, the electrode is well suited for heavily contaminated samples, such as used oil.
    This electrode can be used with non-aqueous reference electrolytes (lithium chloride or tetraethylammonium bromide). Storage in the respective reference electrolyte.

    1 piece(s)

  • Aquatrode plus with Pt1000 (fixed cable)
    6.0257.000
    Aquatrode plus with Pt1000 (fixed cable)

    Combined pH electrode with integrated Pt1000 temperature sensor and fixed cable (2.0 m, banana plug 4 mm) for pH measurements / titrations in ion-deficient aqueous media (e.g., drinking water, process water). This electrode shows a very short response time in these samples.

    The fixed ground-joint diaphragm is insensitive to contamination.
    When c(KCl) = 3 mol/L is used as bridge electrolyte, storage in storage solution is recommended.
    The bridge electrolyte can be easily replaced with a chloride-free electrolyte (e.g., potassium nitrate c(KNO3) = 1 mol/L (6.2310.010)), storage in the used bridge electrolyte.

    1 piece(s)

  • Ag Titrode with sulfide coating
    6.0430.100S
    Ag Titrode with sulfide coating

    Combined silver ring electrode with a pH glass membrane as reference electrode.
    The silver ring is coated with sulfide (Ag2S) for a higher sensitivity and a better limit of detection. This maintenance-free electrode is well suited for precipitation titrations when the pH value remains constant (titrant silver nitrate) of, e.g.:
     

    • chloride, bromide, iodide
    • sulfides
    • hydrogen sulfide
    • mercaptans
    • cyanides


    This electrode is stored in deion. water.

    1 piece(s)

  • Pt Titrode
    6.0431.100
    Pt Titrode

    Combined platinum ring electrode with a pH glass membrane as reference electrode.
    This maintenance free electrode is well suited for redox titrations when the pH value remains constant, e.g.:
     

    • iodometry
    • chromatometry
    • cerimetry
    • permanganometry


    This electrode is stored in deion. water.

    1 piece(s)

  • Sleeve with SGJ 14/12 mm
    6.1236.020
    Sleeve with SGJ 14/12 mm
    Sleeve with SGJ 14/12 mm and O-ring.

    1 piece(s)

  • Extractor rod
    6.1546.030
    Extractor rod
    For PTFE piston of dosing unit

    1 piece(s)

  • Amber glass bottle / 1000 mL / GL 45
    6.1608.023
    Amber glass bottle / 1000 mL / GL 45
    For Exchange Units. Bottle for auxiliary solutions.

    2 piece(s)

  • Stirring propeller / 96 mm
    6.1909.010
    Stirring propeller / 96 mm
    Propeller stirrer, length from lower edge of SGJ: 96 mm. For use with beakers with 722, 802 Rod Stirrer

    1 piece(s)

  • Support stand without support rod
    6.2001.060
    Support stand without support rod
    To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.

    1 piece(s)

  • Clamping ring
    6.2013.010
    Clamping ring

    For support rods with a diameter of 10 mm.


    1 piece(s)

  • Support rod / 400 mm
    6.2016.070
    Support rod / 400 mm

    1 piece(s)

  • Electrode holder
    6.2021.020
    Electrode holder
    Electrode holder for 4 electrodes and 2 buret tips

    1 piece(s)

  • Holding clip for bottles
    6.2043.005
    Holding clip for bottles

    Holding spring for reagent bottles in exchange units.


    2 piece(s)

  • Adapter red  2 mm plug / 4 mm socket
    6.2103.130
    Adapter red 2 mm plug / 4 mm socket
    For connecting plug B (4 mm) to 2 mm socket.

    2 piece(s)

  • Adapter black 2 mm plug / B socket 4 mm
    6.2103.140
    Adapter black 2 mm plug / B socket 4 mm
    For connecting plug B (4 mm) to 2 mm socket.

    2 piece(s)

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).

    1 piece(s)

  • Cable plug F / F-angled / 1 m
    6.2116.020
    Cable plug F / F-angled / 1 m

    For connecting 6.0335.010 Automated Hanging Mercury Drop Electrode (AHMDE) or 628 Rotating Disk Electrode (RDE) to 691 VA Detector

    Cable to connect the Spectrosense to a Titrino or Titrando

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Buffer solutions pH 4, 7 and 9
    6.2307.230
    Buffer solutions pH 4, 7 and 9
    Mixed buffer solutions pH 4.00/7.00/9.00 (25 °C) in single use sachets, colourless, box of 3 x 10 x 30 mL

    1 piece(s)

  • Electrolyte  3 mol/L KCl (50 mL)
    6.2308.050
    Electrolyte 3 mol/L KCl (50 mL)
    Electrolyte solution c(KCl) = 3 mol/L (for Ag/AgCl reference systems)

    1 piece(s)

  • TEABr 0.4 mol/L in ethylene glycol (250 mL)
    6.2320.000
    TEABr 0.4 mol/L in ethylene glycol (250 mL)
    Electrolyte solution TEABr (tetraethylammonium bromide in ethylene glycol), c(TEABr) = 0.4 mol/L

    1 piece(s)

  • Storage solution
    6.2323.000
    Storage solution
    Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L

    1 piece(s)

  • 
    5 mm hex key for IC Sample Processors
    6.2621.070
    5 mm hex key for IC Sample Processors

    1 piece(s)

  • Hexagon key 2 mm
    6.2621.130
    Hexagon key 2 mm
    2 mm.

    1 piece(s)

  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    2 piece(s)