836 Titrando

836 Titrando
Part Number: 2.836.0010
High-end titrator for up to four 800 Dosino dosing systems. Dynamic (DET) and monotonic (MET) titration, endpoint titration (SET), enzymatic and pH-STAT titrations (STAT), Karl Fischer titration (KFT), measurements with ion-selective electrodes (MEAS CONC), dosing functions with monitoring (DOS), liquid handling. With four MSB connections, one galvanically separate measuring interface, USB connection.
  • Documentos
  • Peças
  • Opções

Faça o download do escopo completo de entrega e acessórios opcionais

  • Ecotrode Plus
    6.0262.100
    Ecotrode Plus

    Combined pH electrode for aqueous acid/base titration. The fixed ground-joint diaphragm is insensitive to contamination. Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.

    1 piece(s)

  • Holding clip for bottles
    6.2043.005
    Holding clip for bottles

    Holding spring for reagent bottles in exchange units.


    2 piece(s)

  • Adapter red  2 mm plug / 4 mm socket
    6.2103.130
    Adapter red 2 mm plug / 4 mm socket
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Adapter black 2 mm plug / B socket 4 mm
    6.2103.140
    Adapter black 2 mm plug / B socket 4 mm
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).

    1 piece(s)

Faça o download do escopo completo de entrega e acessórios opcionais

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

  • 801 Stirrer with stand
    2.801.0040
    801 Stirrer with stand

    Magnetic stirrer including base plate, support rod and electrode holder for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimat and 780/781 pH meters as well as the 856 and 867 measuring modules. With permanently attached cable for MSB (Metrohm Serial Bus).

  • 802 Stirrer (propeller stirrer) for 804 Ti Stand
    2.802.0040
    802 Stirrer (propeller stirrer) for 804 Ti Stand
    Rod stirrer with 6.1909.010 Propeller stirrer.
  • 803 TI Stand with stirrer and pump
    2.803.0010
    803 TI Stand with stirrer and pump

    Compact titration stand with magnetic stirrer and built-in pump for solvent addition and aspiration of the titration vessel contents. Suitable for Karl Fischer titrations with Titrandos. MSB connection.
    Including comprehensive accessories, solvent bottle and waste bottle.

  • 804 Ti Stand with stand
    2.804.0040
    804 Ti Stand with stand
    Titration stand and controller for 802 Rod Stirrer. The 804 Ti Stand together with the optional 802 Rod Stirrer provides an alternative to the magnetic stirrer. Ti Stand with base plate, support rod and electrode holder.
  • 805 Dosimat
    2.805.0010
    805 Dosimat
    Dosing device for the Titrando and Sample Processors with read/write hardware for intelligent Exchange Units. With permanently attached cable. Without Exchange Unit.
  • Base plate on both sides
    6.2001.090
    Base plate on both sides
    Double stand for attaching 2 x 801, 803, 804 to a Titrando
  • Bottle holder for Dosinos
    6.2061.010
    Bottle holder for Dosinos
    Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
  • Electrode Cable 2 m / F
    6.2104.030
    Electrode Cable 2 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
  • Electrode cable / 1 m / 2 x 2 mm
    6.2104.140
    Electrode cable / 1 m / 2 x 2 mm
    For connecting temperature sensors with Metrohm plug-in head G with 780, 781, 826, 827 pH/Ion meters and all Titrandos
  • Electrode cable 2 m, 2 x 2 mm
    6.2104.150
    Electrode cable 2 m, 2 x 2 mm
    For connecting temperature sensors with Metrohm plug-in head G with 780, 781, 826, 827 pH/Ion meters and all Titrandos
  • Strand / 1 m / 2 x B
    6.2106.020
    Strand / 1 m / 2 x B
    Electrode cable with 2 x plug B (4 mm) for connecting electrodes with plug-in head B
  • Strand / 2 m / 2 x B
    6.2106.060
    Strand / 2 m / 2 x B
    Electrode cable with 2 x plug B (4 mm) for connecting electrodes with plug-in head B
  • RS-232 cable 3 m, 25-pin – 9-pin
    6.2125.010
    RS-232 cable 3 m, 25-pin – 9-pin
    Connecting RS-232 interface to IBM PC AT or compatible computer. Adapter 25-pin to 9-pin
  • RS-232 cable 3 m, 25-pin – 25-pin
    6.2125.020
    RS-232 cable 3 m, 25-pin – 25-pin
    Connecting Metrohm RS-232 interface with Seiko printer DPU-41X, AND or Mettler balances (option 011, 012). For 691, 692, 713 pH Meters, Titrinos, or 737 KF Coulometer. RS-232 extension cable (1:1) with special EMC shielding.
  • RS-232 DB9 - IBM-PC(DB9) connecting cable
    6.2134.040
    RS-232 DB9 - IBM-PC(DB9) connecting cable

    For the Metrohm RS-232 interface - PC connection. For Titrinos, Titrino plus and 756, 831 KF Coulometer, RS-232/USB Box

  • Connecting cable RS-232 to Sartorius MP8
    6.2134.060
    Connecting cable RS-232 to Sartorius MP8
    Connecting Metrohm RS-232 interface to Sartorius balance. Used with Titrinos, and 756, 831 KF Coulometer, RS-232/USB Box
  • Cable RS-232 DB9 socket f – DB9 plug
    6.2134.110
    Cable RS-232 DB9 socket f – DB9 plug
    Connecting Metrohm RS-232 interface (DB9) to a Custom DP40 printer. For Titrinos or 756/831 KF Coulometer. RS-232 extension cable (1:1)
  • Cable RS-232 to Mettler AX
    6.2134.120
    Cable RS-232 to Mettler AX
    Connecting Metrohm RS-232 interface to Mettler AX
  • Remote Box MSB
    6.2148.010
    Remote Box MSB
    Additional remote interface for the connection of devices that can be controlled via remote lines. With permanently attached cable.
  • RS-232/USB box
    6.2148.020
    RS-232/USB box

    Extends the Titrando, USB Sample Processors, Dosing Interface, Titrosampler by two RS-232 interfaces for connecting e.g. balances, PC, LIMS. Requires 6.2151.030 cable.


  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable
  • Cable USB A - USB B / 0.6 m
    6.2151.030
    Cable USB A - USB B / 0.6 m
    Connecting cable USB A - USB B
  • Exchange Unit 1 mL
    6.3026.110
    Exchange Unit 1 mL
    Exchange Unit with integrated data chip with 1 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 5 mL
    6.3026.150
    Exchange Unit 5 mL
    Exchange Unit with integrated data chip with 5 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 10 mL
    6.3026.210
    Exchange Unit 10 mL
    Exchange unit with integrated data chip with 10 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange Unit 20 mL
    6.3026.220
    Exchange Unit 20 mL
    Exchange unit with integrated data chip with 20 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, anti-diffusion buret tip and standard amber glass reagent bottle.
  • Exchange unit 50 mL
    6.3026.250
    Exchange unit 50 mL

    Exchange unit with integrated data chip with 50 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion tip and standard amber glass reagent bottle.


  • Dosing Unit 2 mL
    6.3032.120
    Dosing Unit 2 mL
    Dosing unit with integrated data chip with 2 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 glass thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Differential amplifier plug F / 230 V EU
    6.5104.030
    Differential amplifier plug F / 230 V EU
    Differential amplifier with power supply.
  • Differential amplifier with plug F / 115 V US
    6.5104.040
    Differential amplifier with plug F / 115 V US
    Differential amplifier with power supply.
  • KF equipment
    6.5609.000
    KF equipment
    Karl Fischer equipment for volumetry, complete set of accessories for Karl Fischer water determination