IC equipment: Dose-in Gradient Anions

IC equipment: Dose-in Gradient Anions
Artikkelnummer: 6.5330.150

Accessory set for assembling the Dose-in Gradient for anion analyses.

  • Dokumenter
  • Delebetegnelse

Last ned en komplett deleliste i PDF:

  • Metrosep A Trap 1 - 100/4.0
    6.1014.000
    Metrosep A Trap 1 - 100/4.0

    High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0. Should these anionic contaminants elute at a later time, there will be practically no further noticeable influence on the baseline, due to the enormous peak widening.


    This column is primarily used with gradient applications.


    1 piece(s)

  • 
            
    Eluent bottle cap GL 45
    6.1602.160
    Eluent bottle cap GL 45
    For eluent bottles, with connectors for the adsorber tube and the aspiration tubing.

    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    1 piece(s)

  • Thread adapter S 40 to GL 45
    6.1618.020
    Thread adapter S 40 to GL 45
    Adapter for bottles with S40 thread (Merck...) to GL45.

    1 piece(s)

  • Adapter SGJ 14 for 6.1619.XXX Adsorber tube
    6.1624.000
    Adapter SGJ 14 for 6.1619.XXX Adsorber tube

    Adapter SGJ 14. Part of 6.1619.010 for Dilution Sample Processor.

    1 piece(s)

  • FEP tubing / M6 / 100 cm
    6.1805.120
    FEP tubing / M6 / 100 cm
    With light and kink protection

    1 piece(s)

  • FEP aspiration tube M6, 0.5 m
    6.1829.020
    FEP aspiration tube M6, 0.5 m
    For Dosing Unit

    1 piece(s)

  • PEEK capillary 0.75 mm i.d. / 3 m
    6.1831.030
    PEEK capillary 0.75 mm i.d. / 3 m
    For all IC components.

    1 piece(s)

  • PEEK capillary 0.25 mm i.d., 45 cm
    6.1831.120
    PEEK capillary 0.25 mm i.d., 45 cm

    1 piece(s)

  • Connecting tubing for degasser pump, 125 mm
    6.1834.090
    Connecting tubing for degasser pump, 125 mm
    For Professional IC Instruments

    1 piece(s)

  • Mounting ribbon to 6.2744.340, 25 x 50 mm
    6.2053.030
    Mounting ribbon to 6.2744.340, 25 x 50 mm
    Mounting ribbon to Equipment set Dosino gradient

    1 piece(s)

  • Holder for Dosino to IC instruments
    6.2057.210
    Holder for Dosino to IC instruments
    Mounting part for Dosinos at the IC instrument housing.

    1 piece(s)

  • Pressure screw short
    6.2744.070
    Pressure screw short
    Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries

    1 piece(s)

  • M6 thread / UNF 10/32 adapter
    6.2744.080
    M6 thread / UNF 10/32 adapter

    With M6 outer thread. For IC instruments.

    1 piece(s)

  • 
    6-port adapter 4 × UNF 10/32, 2 × UNF 1/4-28
    6.2744.340
    6-port adapter 4 × UNF 10/32, 2 × UNF 1/4-28

    For connecting up to five Dosinos with various solutions to one IC pump. For Dosino gradient applications.


    1 piece(s)

  • 
    PEEK pressure screw 14 mm, 3 pcs.
    6.2744.350
    PEEK pressure screw 14 mm, 3 pcs.

    With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.


    1 piece(s)