Autolab Spectrophotometer UA

Autolab Spectrophotometer UA
Artikkelnummer: AUT.SPECT.UA

The Autolab Spectrophotometer UA is a compact device for applications in the UV/VIS/NIR wavelenght range (from 200 nm to 1100 nm). This instrument is designed to work in combination with all Autolab potentiostat/galvanostat instruments and is supported by the NOVA software.The spectrophotometer can be manually controlled or can be synchronized with electrochemical measurements. This ensures accurate timing during the measurements and allows a direct correlation between the electrochemical and spectroscopic data.

  • Spesifikasjoner
  • Dokumenter
  • Delebetegnelse
  • Tilleggsutstyr
A/D converter 16 bit, 2 MHz
Detector CCD linear array, 2048 pixels
Dimensions 175 mm x 110 mm x 44 mm
Fiber optic connector SMA-905
Integration time 1.05 ms - 600 s
Maximum number of scans 1013 scans of 2048 pixels
Power requirements 12 V DC / 350 mA
Resolution 2.5 nm
Sensitivity 310000 counts/μW per ms integration time
Stray light 0.22 %
Wavelength range 200 nm - 1100 nm

Last ned en komplett deleliste i PDF:

  • Standard USB cable
    CABLE.USB
    Standard USB cable

    Standard USB cable for Autolab instruments.

    1 piece(s)

  • Spectroelectrochemistry trigger cable for DIO15 instruments
    DIO15.SPEC.TRIGGER
    Spectroelectrochemistry trigger cable for DIO15 instruments

    Triggering cable required for synchronized spectroelectrochemical measurement in combination with Autolab instruments equipped with a DIO15 interface. This cable provides a direct connection between the digital input/output (DIO) port of the Autolab and the Autolab light source and Autolab spectrophotometer. The connection to the light source enables the remote control of the shutter and the connection to the spectrophotometer provides the possibility to synchronize the acquisition of spectroscopy data with the acquisition of electrochemical data.

    1 piece(s)

  • Spectroelectrochemistry trigger cable for DIO48 instruments
    DIO48.SPEC.TRIGGER
    Spectroelectrochemistry trigger cable for DIO48 instruments

    Triggering cable required for synchronized spectroelectrochemical measurement in combination with Autolab instruments equipped with a DIO48 interface. This cable provides a direct connection between the digital input/output (DIO) port of the Autolab and the Autolab light source and Autolab spectrophotometer. The connection to the light source enables the remote control of the shutter and the connection to the spectrophotometer provides the possibility to synchronize the acquisition of spectroscopy data with the acquisition of electrochemical data.

    1 piece(s)

Last ned en komplett deleliste i PDF:

  • Autolab 200 μm optical fiber for UV/VIS applications.
    AUT.FIBER.200.UV
    Autolab 200 μm optical fiber for UV/VIS applications.

    2 m long, 200 μm diameter optical fiber for UV/VIS applications.

  • Autolab 200 μm optical fiber for UV/VIS/NIR applications.
    AUT.FIBER.200.UVIR
    Autolab 200 μm optical fiber for UV/VIS/NIR applications.

    The Autolab spectrophotometer and light source are designed to connect to the electrochemical cell or cuvette holder using optical fibers. The standard dimensions of the optical fibers is 2 m in length and 200 μm in diameter. The fibers are fitted with SMA-905 connectors on both ends.

  • Cuvette holder
    CUV-UV/VIS
    Cuvette holder

    The cuvette holder provides the possibility to carry out transmission measurements using a classic 10 mm glass or quartz cuvette. The holder is fitted with two SMA-905 connectors with collimating lenses built-in. A cover is provided to shield the cuvette from environmental light.