761 Compact IC with «MSM» and sample changer (soft drinks)

Artikkelnummer: 2.761.0520
Compact IC System with chemical Suppression especially designed for the analysis of anions in carbonated soft drinks. Incuding separating column, MPak cabinet for eluent and regenerant solution as well as complete accessories, spare parts and software. Automated system using the 766 IC Sample Proc.
  • Spesifikasjoner
  • Dokumenter
  • Delebetegnelse
  • Tilleggsutstyr
Dimensions in mm (W/H/D) 259/446/355 ; 280/730/500
Dimensions remark Compact IC; sample changer

Compact high-performance ion chromatography system with chemical suppression and conductivity detection

Chromatography system and accessories

  • Biocompatible system
  • Serial low-pulsation dual-piston pump, flow range 0.2 ... 2.5 mL/min, maximum pressure 25 MPa (250 bar)
  • Built-in six-way injection valve
  • Pulsation absorber
  • Leak detector
  • Thermally and electronically insulated column compartment
  • Buil-in AD converter
  • IC Net and IC Cap software for control and data processing with flexible data export
  • 2-channel peristaltic pump for automatic transport of sample and regeneration solution
  • Metrohm Suppressor Module II (MSM II)


838 Advanced Sample Processor

  • Capacity: 148 sample vials
  • Rinsing positions: 3
  • Sample volume: 11 mL or 2.5 mL
  • Sample needle: PEEK or steel
  • Remote control: via RS-232C interface and software IC Net or IC Cap
  • Pump
    • 2 channels
    • Speed of rotation: ±6.7...100 min–1, settable in 15 steps
    • Max. pressure: 0.4 MPa (4 bar)

Last ned en komplett deleliste i PDF:

  • Metrosep A Supp 5 - 100/4.0
    6.1006.510
    Metrosep A Supp 5 - 100/4.0

    The Metrosep A Supp 5 - 100/4.0 allows highly efficient, rapid separations. This property makes the Metrosep A Supp 5 - 100/4.0 the standard column for short analysis times and for determination of anions which elute late (e.g., perchlorate).

    1 piece(s)

  • Metrosep RP 2 Guard/3.5
    6.1011.030
    Metrosep RP 2 Guard/3.5
    General guard column. For Metrosep Anion Dual 2 and Dual 3 in particular.

    1 piece(s)

  • Spare filter for RP Guard, 10 pieces
    6.1011.120
    Spare filter for RP Guard, 10 pieces

    1 piece(s)

  • Bottle / 300 mL
    6.1608.080
    Bottle / 300 mL

    Rinsing vessel for IC Sample Processors.

    3 piece(s)

  • PTFE capillary 0.5 mm i.d. / 3 m
    6.1803.030
    PTFE capillary 0.5 mm i.d. / 3 m
    Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    1 piece(s)

  • Silicone tubing 6 mm i.d., 1 m
    6.1816.020
    Silicone tubing 6 mm i.d., 1 m
    For waste tubing.

    2 piece(s)

  • PEEK capillary 0.25 mm i.d. / 3 m
    6.1831.010
    PEEK capillary 0.25 mm i.d. / 3 m
    For all IC components.

    1 piece(s)

  • PEEK capillary 0.5 mm i.d., 40 cm
    6.1831.050
    PEEK capillary 0.5 mm i.d., 40 cm
    For inline dialysis and for sample changers. For IC Dialysis Unit, IC Sample Processor, Compact IC Autosampler, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit, Compact VA Autosampler

    1 piece(s)

  • PEEK capillary 0.5 mm i.d., 1 m
    6.1831.060
    PEEK capillary 0.5 mm i.d., 1 m
    For inline dialysis and for Sample Changers. For IC Dialysis Unit, IC Sample Processor, Compact IC Autosampler, IC Filtration Sample Processor, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit

    2 piece(s)

  • Column holder 8.5 mm
    6.2027.030
    Column holder 8.5 mm
    For mounting columns in column chamber of IC instruments.

    1 piece(s)

  • Column holder 11.3 mm
    6.2027.040
    Column holder 11.3 mm
    For mounting columns in column chamber of IC instruments.

    1 piece(s)

  • Sample rack 148 x 11 mL + 3 x 300 mL
    6.2041.440
    Sample rack 148 x 11 mL + 3 x 300 mL

    Sample rack for 148 x 11 mL samples with 3 rinsing beakers.

    1 piece(s)

  • Beaker retainer for Advanced IC Sample Processor
    6.2064.000
    Beaker retainer for Advanced IC Sample Processor
    Retaining plate for 838 Advanced Sample Processors. For holding 2.5 or 11 mL vials.

    1 piece(s)

  • RS-232 cable, 5 m, DB9 – DB9
    6.2134.100
    RS-232 cable, 5 m, DB9 – DB9
    Connecting Metrohm RS-232 interface to Titrinos, 756 KF Coulometer, 762 or 771 IC Interfaces, 790 Personal IC, 743 Rancimat, 763 PVC Thermomat, 873 Biodiesel Rancimat.

    2 piece(s)

  • Tool for piston seal
    6.2617.010
    Tool for piston seal
    For removing and assembling the piston seal for all standard pump heads

    1 piece(s)

  • Pulsation absorber (metal-free)
    6.2620.150
    Pulsation absorber (metal-free)
    For all ion chromatographs

    1 piece(s)

  • Adjustable wrench
    6.2621.000
    Adjustable wrench
    Max. opening: 20 mm. For IC instruments

    2 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 5/16 in. wrench
    6.2621.060
    5/16 in. wrench
    For 5/16 in. screws. For IC instruments

    1 piece(s)

  • Capillary cutter
    6.2621.080
    Capillary cutter
    For plastic capillaries. Used with IC instruments

    1 piece(s)

  • 1/2 in. wrench
    6.2621.090
    1/2 in. wrench
    For 1/2 in. screws. For IC Sample Processors

    2 piece(s)

  • 
    3 mm hex key for IC Sample Processors
    6.2621.100
    3 mm hex key for IC Sample Processors

    1 piece(s)

  • Wrench
    6.2739.000
    Wrench
    For tightening connectors

    1 piece(s)

  • Piston seal (orange)
    6.2741.020
    Piston seal (orange)
    For all standard pump heads

    2 piece(s)

  • Sample tubes 11 mL
    6.2743.050
    Sample tubes 11 mL
    2000 pieces. For IC Sample Processors and VA Autosampler

    1 piece(s)

  • Stopper with perforation
    6.2743.070
    Stopper with perforation
    2000 pieces. For IC Sample Processors

    1 piece(s)

  • Pressure screw 5x
    6.2744.010
    Pressure screw 5x
    With UNF 10/32 connection. For the connection of PEEK capillaries

    6 piece(s)

  • Coupling olive/UNF 10/32, 4x
    6.2744.030
    Coupling olive/UNF 10/32, 4x
    Connection between pressure screw and pump tubing. 4 pieces. For IC instruments with peristaltic pump

    1 piece(s)

  • 2 x UNF 10/32 coupling
    6.2744.040
    2 x UNF 10/32 coupling
    For connecting 1/16 in. capillaries. For IC instruments

    1 piece(s)

  • Nozzle/UNF 10/32 coupling with security device
    6.2744.160
    Nozzle/UNF 10/32 coupling with security device
    Security device for connecting pump tubing to a nozzle.

    2 piece(s)

  • Safety shield
    6.2751.110
    Safety shield


    Safety shield for the Advanced IC/VA Sample Processors.


    1 piece(s)

  • Syringe 10 mL with Luer connection
    6.2816.020
    Syringe 10 mL with Luer connection
    For various applications in IC and VA

    3 piece(s)

  • Inline filter 2 µm
    6.2821.120
    Inline filter 2 µm
    Inline filter 2 µm

    2 piece(s)

  • Spare filter for inline filter
    6.2821.130
    Spare filter for inline filter
    Spare filter for inline filter.

    1 piece(s)

Last ned en komplett deleliste i PDF:

  • Metrosep A Supp 10 Guard HC/4.0
    6.1020.520
    Metrosep A Supp 10 Guard HC/4.0


    The Metrosep A Supp 10 Guard HC/4.0 is the high-capacity variant of the Metrosep A Supp 10 Guard/4.0.


  • Pressure screw short
    6.2744.070
    Pressure screw short
    Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
  • Tubing cartridge
    6.2755.000
    Tubing cartridge
    For the peristaltic pumps of IC instruments. Contact pressure adjustable.
  • Zirconium oxide piston
    6.2824.070
    Zirconium oxide piston
    Pump piston for all standard pump heads
  • Checking mirror
    6.2831.000
    Checking mirror
    For position determination
  • MSM Rotor A
    6.2832.000
    MSM Rotor A
    Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
  • Connection piece to  MSM and MSM-LC
    6.2832.010
    Connection piece to  MSM and MSM-LC
    With inlets and outlets. For all IC instruments with MSM
  • Rotor for flat plate injector (metal-free)
    6.5904.030
    Rotor for flat plate injector (metal-free)
    For all IC instruments with metal-free injectors
  • Injector with 0.25 µL internal loop
    6.5904.050
    Injector with 0.25 µL internal loop
    Flat plate injector with 0.25 µL internal loop
  • Rotor (internal loop, 0.25 µL)
    6.5904.060
    Rotor (internal loop, 0.25 µL)

    Rotor for 4-port flat plate injector (6.5904.050), 0.25 µL internal loop

  • Rotor (internal loop, 1.0 µL)
    6.5904.070
    Rotor (internal loop, 1.0 µL)

    Rotor for 4-port flat plate injector (6.9956.001), 1.0 µL internal loop