810 Sample Processor

810 Sample Processor
Order number: 2.810.0010

Sample Processor for the automated analysis of routine samples using 916 Ti-Touch or 915 KF Ti-Touch.

Sample Processor with one workstation and one built-in membrane pump for the automatic processing of potentiometric as well as Karl Fischer titrations, in series with small to medium quantities. In addition to the built-in pump, an additional one (membrane or peristaltic) and up to three dosing devices for Liquid Handling tasks can be connected.

Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately.

 

  • Documents
  • Included parts
  • Opt. equipment

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Sleeve with SGJ 14/12 mm
    6.1236.020
    Sleeve with SGJ 14/12 mm
    Sleeve with SGJ 14/12 mm and O-ring.

    2 piece(s)

  • SGJ stopper / B-14/(15)
    6.1446.000
    SGJ stopper / B-14/(15)

    5 piece(s)

  • Stopper
    6.1446.010
    Stopper
    Used with Sample Changers

    3 piece(s)

  • Container 10 L
    6.1621.000
    Container 10 L
    As rinsing or waste container in automated systems.

    1 piece(s)

  • FEP tubing / M6 / 80 cm
    6.1805.110
    FEP tubing / M6 / 80 cm
    With light and kink protection

    1 piece(s)

  • FEP tubing / M6 / 48 cm
    6.1805.420
    FEP tubing / M6 / 48 cm
    With light and kink protection

    3 piece(s)

  • 
    PTFE tubing 4 mm / 6 mm / 4 m
    6.1812.000
    PTFE tubing 4 mm / 6 mm / 4 m

    1 piece(s)

  • PVDF connection nipple
    6.1828.000
    PVDF connection nipple

    For 6.1621.000 canister.


    1 piece(s)

  • Cable clip
    6.2053.000
    Cable clip
    Cable clip for fastening cables and tubes

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Hexagon key 4 mm
    6.2621.030
    Hexagon key 4 mm

    1 piece(s)

  • 
    5 mm hex key for IC Sample Processors
    6.2621.070
    5 mm hex key for IC Sample Processors

    1 piece(s)

  • Hexagon key 2.5 mm
    6.2621.140
    Hexagon key 2.5 mm

    1 piece(s)

  • Guiding sleeve
    6.2709.070
    Guiding sleeve
    For fixation of buret and dosing tips in titration heads and electrode holders

    3 piece(s)

  • Spray nozzle
    6.2740.020
    Spray nozzle

    For the fine-spraying of the rinsing solution.


    3 piece(s)

  • Safety shield
    6.2751.080
    Safety shield


    Safety shield for single-tower Sample Processors without 786 Swing Head.


    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • 741 Magnetic Stirrer
    2.741.0010
    741 Magnetic Stirrer

    Magnetic stirrer for sample changers.

    The magnetic stirrer is located beneath the sample rack.

  • 
    772 Pump Unit – aspirate
    2.772.0120
    772 Pump Unit – aspirate

    Peristaltic pump for direct connection to Sample Processors. The "Aspiration" version contains extensive accessories for the aspiration of titered-out solutions.


  • 802 Stirrer
    2.802.0020
    802 Stirrer

    Rod stirrer for sample changer and Sample Processor.

    With 6.1909.020 Propeller stirrer 104 mm and fixed cable.

  • 823 Membrane Pump Unit «aspirate»
    2.823.0020
    823 Membrane Pump Unit «aspirate»

    Membrane pump for direct connection to Sample Processors. The «Aspiration» version contains numerous accessories for aspirating off solutions.

  • 849 Level Control
    2.849.0010
    849 Level Control
    Additional equipment for Sample Processors for monitoring the filling level of rinsing or waste canisters via Remote. Prevents pumps from running dry and/or canisters from overflowing and is suitable for use with aqueous solutions, solvents and suspensions.
  • Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    6.1458.010
    Titration head, 6 x SGJ 14 and 3 x SGJ 9 openings
    With 6xSGJ 14 and 3x SGJ 9 apertures.
  • 
    Titration head /4 x M10 connectors
    6.1458.020
    Titration head /4 x M10 connectors

    With 4 M10 screw nipples, including stoppers.


  • 
    KF titration head /4 x M10 connectors
    6.1458.030
    KF titration head /4 x M10 connectors

    With 4 M10 screw nipples, including stoppers.


  • Titration Head, 3 x SGJ 14
    6.1458.040
    Titration Head, 3 x SGJ 14
    Titration head for 120 mL beakers. With 3 openings SGJ 14 and 4 openings 6.4 mm, 2 dosing tips included. Suitable for rinsing and aspiration equipment.
  • Titration head / 2 x SGJ 14
    6.1458.070
    Titration head / 2 x SGJ 14
    Titration head for 75 mL beakers. With 2 openings SGJ 14, 2 openings 6.4 mm, 1 opening M10 and 3 pre-mounted dosing tips. Suitable for rinsing and aspiration equipment.
  • Sample rack 12 x 250 mL
    6.2041.310
    Sample rack 12 x 250 mL
    Sample rack for 12 x 250 mL, one row
  • Sample rack 16 x 150 mL
    6.2041.320
    Sample rack 16 x 150 mL
    Sample rack for 16 x 150 mL samples, one-row
  • Sample rack 24 x 75 mL
    6.2041.340
    Sample rack 24 x 75 mL
    Sample rack for 24 x 75 mL samples, one-row.
  • Sample rack for 12 x 150 mL
    6.2041.360
    Sample rack for 12 x 150 mL
    Sample rack for 12 x 150 mL samples, one-row
  • Sample rack 14 x 200 mL
    6.2041.370
    Sample rack 14 x 200 mL
    Sample rack for 14 x 200 mL samples, one-row
  • Sample rack 14 x 235 mL
    6.2041.380
    Sample rack 14 x 235 mL
    Sample rack for 14 x 235 mL samples, one-row
  • Sample rack 16 x 120 mL
    6.2041.390
    Sample rack 16 x 120 mL
    Sample rack for 16 x 120 mL samples, one-row
  • Sample rack 21 x 100 mL (COD)
    6.2041.460
    Sample rack 21 x 100 mL (COD)
    Sample rack 21 x 100 mL for the determination of COD
  • Sample rack 22 x 120 mL
    6.2041.470
    Sample rack 22 x 120 mL
    Sample rack for 22 x 120 mL samples (6.1459.300), single-row.
  • Tower extension for Sample Processors
    6.2058.110
    Tower extension for Sample Processors
    Height extension 130 mm fpr Sample Processors.Tower extension for COD applications.
  • Remote cable 843 Pump Station to Sample Processor
    6.2141.300
    Remote cable 843 Pump Station to Sample Processor
    Remote cable for the direct connection of the 843 Pump Station to the pump connectors of the Sample Processors
  • Remote Box MSB
    6.2148.010
    Remote Box MSB
    Additional remote interface for the connection of devices that can be controlled via remote lines. With permanently attached cable.
  • Drip pan for 778/810/814/838/858 Sample Processors
    6.2711.060
    Drip pan for 778/810/814/838/858 Sample Processors

    Drip pan for 778, 810, 814, 838, 858 Sample Processors