Main module Pick&Place M

Main module Pick&Place M
Order number: 2.1011.0010

Main module for setting up an OMNIS Sample Robot Pick&Place in size M. This module is equipped with the main lift and one gripper. One M/L module base and one rack base are each required to complete the setup. It must be equipped with sample racks, gripper fingers and workstations, e.g., Pick&Place module or a pump module in order to use it to set up a functioning Sample Robot. The selection of these components proceeds in accordance with the application.

  • Documents
  • Included parts
  • Opt. equipment

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Cable cover for Sample Robot
    6.02706.000
    Cable cover for Sample Robot

    The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.

    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Pick&Place module
    2.1014.0010
    Pick&Place module

    Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.

  • Pick&Place module with stirrer
    2.1014.0110
    Pick&Place module with stirrer

    Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. The built-in magnetic stirrer makes it possible to analyze samples that were prepared externally on a magnetic agitator directly in the Sample Robot without having to remove the magnetic stirring bar beforehand. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses.

  • Peristaltic (2-channel) pump module
    2.1016.0010
    Peristaltic (2-channel) pump module

    Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with both a rinsing pump and an aspiration pump. They are used to clean the sensors in a Pick&Place module and to empty the sample beaker after the analysis before it is returned to the rack once again.

     

  • Peristaltic (4-channel) pump module
    2.1016.0110
    Peristaltic (4-channel) pump module

    Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation is equipped with two rinsing pumps and two aspiration pumps each. They are used to clean the sensors in two Pick&Place modules and to empty the sample beaker after the analysis before it is placed back in the rack once again.

  • Rack base
    6.02001.010
    Rack base

    Rack base for extending the main modules to the OMNIS Sample Robot

  • Module base M/L
    6.02003.010
    Module base M/L

    Module base for extending the main modules M and L to the OMNIS Sample Robot.

  • OMNIS sample rack 9 x 250 mL
    6.02041.010
    OMNIS sample rack 9 x 250 mL

    OMNIS sample rack 9 x 250 mL for use with 250 mL glass sample beaker (P&P) or 250 mL PP sample beaker (P&P)

  • OMNIS sample rack 9 x 200 mL
    6.02041.020
    OMNIS sample rack 9 x 200 mL

    OMNIS 9 x 200 mL sample rack for use with disposable PP sample beaker.

  • OMNIS sample rack 16 x 120 mL
    6.02041.030
    OMNIS sample rack 16 x 120 mL

    OMNIS sample rack 16 x 120 mL for use with 120 mL PP sample beaker

  • OMNIS sample rack 25 x 75 mL
    6.02041.040
    OMNIS sample rack 25 x 75 mL

    OMNIS sample rack 25 x 75 mL for use with 75 mL glass sample beaker (P&P)

  • Retainer  for 200 mL sample beaker
    6.02064.020
    Retainer for 200 mL sample beaker

    Retainer for fixing the 200 mL sample beaker in place in the gripper fingers of the OMNIS Sample Robot Pick&Place.

  • Dummy panel for module plate
    6.02600.000
    Dummy panel for module plate

    Dummy panel for covering open spaces on the module plate of the OMNIS Sample Robot

  • Gripper fingers 26 - 46 mm
    6.02601.000
    Gripper fingers 26 - 46 mm

    Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 26 to 46 mm.

  • Gripper fingers 43 - 65 mm
    6.02601.010
    Gripper fingers 43 - 65 mm

    Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 43 to 65 mm.

  • Gripper fingers 50 - 72 mm
    6.02601.020
    Gripper fingers 50 - 72 mm

    Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 50 to 72 mm.

  • Tubing duct to OMNIS Sample Robot
    6.02602.000
    Tubing duct to OMNIS Sample Robot

    Tubing duct for guiding the tubing between the pump module and canisters.

  • Safety shield for Pick&Place module
    6.02700.000
    Safety shield for Pick&Place module

    Safety shield for Pick&Place modules

  • Consumable Kit OMNIS Gripper
    6.05700.000
    Consumable Kit OMNIS Gripper

    Four slide sleeves and rubber gripper fingers each for replacement on the gripper finger of the OMNIS Sample Robot.

  • Upgrade Sample Robot M to L
    6.05800.020
    Upgrade Sample Robot M to L

    The set contains all of the components required for the upgrade of an already existing OMNIS Sample Robot from size M to size L. Apart from the required rack and module bases, all the required cables, screws, arm extensions as well as the function license are included.