Automated volumetric KF titrations

Automated volumetric KF titrations
Order number: MATi 10

Fully automated system for volumetric Karl Fischer water content determination in up to 24 samples. The system is controlled with tiamo™ and consists of an 814 USB Sample Processor, a 901 Titrando and extensive accessories.

The samples are weighed out into the beakers, sealed to protect against humidity and placed on the rack. Before the actual titration, they are dissolved in a defined volume of KF working medium, after which the water content is titrated.

This method is particularly suitable for samples that dissolve readily in the KF working medium. In addition, solubility can be improved by using suitable solubility promoters.

  • Documents
  • Included parts
  • Opt. equipment
  • Brochure: Water determination according to Karl Fischer with MATi 10 – Complete system for fully automated,volumetric Karl Fischer titration (english)
    • Prospekt: Wassergehaltsbestimmung nach Karl Fischer mit MATi 10 – Komplettsystem für die vollautomatische,volumetrische Karl-Fischer-Titration (deutsch)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • 741 Magnetic Stirrer
    2.741.0010
    741 Magnetic Stirrer

    Magnetic stirrer for sample changers.

    The magnetic stirrer is located beneath the sample rack.

    1 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    2 piece(s)

  • 814 USB Sample Processor (1T/0P)
    2.814.0030
    814 USB Sample Processor (1T/0P)

    USB Sample Processor with one workstation for the automatic processing of routine samples in series with small to medium quantities. Up to two pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, Swing Head and sample vessels must be tailored to the application and ordered separately.
     

    1 piece(s)

  • 901 Titrando
    2.901.0010
    901 Titrando

    The Karl Fischer Titrando for the modern titration laboratory

    In addition to the Karl Fischer mode (KFT), the high-end titrator is also equipped with the SET mode and can thus perform titrations to a predefined endpoint.

    "iTrode ready": As a result of the high-resolution, galvanic measuring interface – now also for the first time with additional digital measuring input for the intelligent "iTrodes" electrodes – it is additionally possible to perform pH measurements with a maximum of precision.

    Thanks to the four MSB connectors, up to four Dosinos can be connected to the 901 Titrando. These can be used not only for titration, but also for the automated addition of sample, standard and auxiliary solutions such as solubility promoters. Furthermore, you have all of the Liquid Handling commands at your disposal, which means that the aspiration of exhausted reagent and the addition of fresh solvent can also be automated.

    1 piece(s)

  • Sample beaker, clear glass, 75 mL, 1 piece 
    6.1432.210
    Sample beaker, clear glass, 75 mL, 1 piece 

    Sample beaker, clear glass, 75 mL, suitable for sample racks 6.2041.340, 6.2041.350, 6.2041.800 and 6.2041.900, 1 piece
     

    24 piece(s)

  • Amber glass bottle / 1000 mL / GL 45
    6.1608.023
    Amber glass bottle / 1000 mL / GL 45
    For Exchange Units. Bottle for auxiliary solutions.

    1 piece(s)

  • FEP tubing / M6 / 150 cm
    6.1805.030
    FEP tubing / M6 / 150 cm
    With light and kink protection

    1 piece(s)

  • Stirring bar / 16 mm
    6.1903.020
    Stirring bar / 16 mm
    Stirring Bar with magnetic core, PTFE coated, length 16 mm

    24 piece(s)

  • Sample rack 24 x 75 mL
    6.2041.340
    Sample rack 24 x 75 mL
    Sample rack for 24 x 75 mL samples, one-row.

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Karl Fischer Equipment for 824
    6.5610.020
    Karl Fischer Equipment for 824
    Karl Fischer equipment for the 824 Easy Sample Changer.

    1 piece(s)

  • Tiamo 2.5 Light CD: 1 license
    6.6056.251
    Tiamo 2.5 Light CD: 1 license

    tiamo™ 2.5 Light computer program for controlling a titration system.

    • Up to two Metrohm instruments (Titrino, Titrando, etc.) can be connected; balances and other generic (i.e. non-Metrohm) instruments can be included without limitation
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • Data export as PDF file, CSV, SLK
    • No parallel titration
    • No data export in XML format for LIMS
    • Dialog languages: German, English, French, Italian, Spanish, Czech, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Sample beakers, plastic (PE), 75 mL, 144 pieces
    6.1459.400
    Sample beakers, plastic (PE), 75 mL, 144 pieces

    Sample beakers, plastic (polyethylene, PE) 75 mL, suitable for 6.2041.340, 6.2041.350 und 6.2041.800 sample racks, 144 pieces.