901 Titrando

901 Titrando
Order number: 2.901.0010

The Karl Fischer Titrando for the modern titration laboratory

In addition to the Karl Fischer mode (KFT), the high-end titrator is also equipped with the SET mode and can thus perform titrations to a predefined endpoint.

"iTrode ready": As a result of the high-resolution, galvanic measuring interface – now also for the first time with additional digital measuring input for the intelligent "iTrodes" electrodes – it is additionally possible to perform pH measurements with a maximum of precision.

Thanks to the four MSB connectors, up to four Dosinos can be connected to the 901 Titrando. These can be used not only for titration, but also for the automated addition of sample, standard and auxiliary solutions such as solubility promoters. Furthermore, you have all of the Liquid Handling commands at your disposal, which means that the aspiration of exhausted reagent and the addition of fresh solvent can also be automated.

  • Documents
  • Included parts
  • Opt. equipment
  • Brochure: 901 Titrando - Intelligent Karl Fischer Titrator (english)
    • Prospekt: 901 Titrando - Intelligenter Karl Fischer Titrator (deutsch)
    • Folleto: 901 Titrando: Titulador Karl Fischer inteligente (español)
  • Brochure: Food Analysis - Quality control in the food and beverage industry (english)
    • Prospectus: Analyse agroalimentaire - Le contrôle qualité dans l’industrie des aliments et des boissons (français)
    • Prospekt: Lebensmittelanalytik - Qualitätskontrolle von Nahrungsmittel (deutsch)
    • Folleto: Análisis de alimentos - Control de calidad en la industria de alimentos y bebidas (español)
  • Declaration of conformity 901 Titrando, English (english)
  • Manual for 901 Titrando (english)
    • 901 Titrando 手册 (中文)
    • Mode d’emploi 901 Titrando (français)
    • Handbuch 901 Titrando (deutsch)
    • Manual 901 Titrando (español)
    • 901 Titrando 매뉴얼, 한국어 (한국어)
  • Monograph: Water determination by Karl Fischer Titration (English) (english)
    • Monograph: Water determination by Karl Fischer Titration (English) (日本語)
  • Release Notes for various instruments, USB 3.0 compatibility (english)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Double Pt-wire electrode for volumetry
    6.0338.100
    Double Pt-wire electrode for volumetry

    Indicator electrode used for volumetric Karl Fischer titration.

    1 piece(s)

  • Set of seals
    6.1244.040
    Set of seals

    Set of seals for 6.1414.030. The set is comprised of one seal and various O-rings.

    1 piece(s)

  • KF Adsorber tube
    6.1403.040
    KF Adsorber tube
    Used with KF equipment. Including cover and O-ring.

    1 piece(s)

  • KF titration vessel lid
    6.1414.030
    KF titration vessel lid
    For volumetric KF titrations.

    1 piece(s)

  • Titration vessel / 20-90 mL
    6.1415.220
    Titration vessel / 20-90 mL

    1 piece(s)

  • Titration vessel / 50-150 mL
    6.1415.250
    Titration vessel / 50-150 mL

    1 piece(s)

  • Septum 12 mm, 5 pieces
    6.1448.010
    Septum 12 mm, 5 pieces
    Set of 5 items.

    2 piece(s)

  • Stirring bar / 16 mm
    6.1903.020
    Stirring bar / 16 mm
    Stirring Bar with magnetic core, PTFE coated, length 16 mm

    2 piece(s)

  • Stirring bar / 25 mm
    6.1903.030
    Stirring bar / 25 mm

    Stirring bar with magnetic core, PTFE covering, length 25 mm.


    2 piece(s)

  • Holding clip for bottles
    6.2043.005
    Holding clip for bottles

    Holding spring for reagent bottles in exchange units.


    5 piece(s)

  • Adapter red  2 mm plug / 4 mm socket
    6.2103.130
    Adapter red 2 mm plug / 4 mm socket
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Adapter black 2 mm plug / B socket 4 mm
    6.2103.140
    Adapter black 2 mm plug / B socket 4 mm
    For connecting plug B (4 mm) to 2 mm socket.

    1 piece(s)

  • Electrode cable / 1 m / F
    6.2104.020
    Electrode cable / 1 m / F
    For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).

    1 piece(s)

  • 
    Weighing boats
    6.2412.000
    Weighing boats

    Weighing boat made of glass for the 6.1414.030 titration vessel lid or the 6.1455.31X, 6.1464.32X, 6.1465.320 titration vessel. For KF water determinations. Including protective tube.


    1 piece(s)

  • Screw nipple
    6.2730.010
    Screw nipple
    Made of PP. For 6.1448.010 Septum or for mounting 6.1403.040 Drying tube or 6.0338.100 Electrode in 6.1414.030 and 6.1414.040 KF Titration vessel lids. Used for KF titrations.

    2 piece(s)

  • Septum stopper
    6.2730.020
    Septum stopper
    With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.

    1 piece(s)

  • Stopper
    6.2730.030
    Stopper

    Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.

    3 piece(s)

  • Molecular sieve
    6.2811.000
    Molecular sieve
    Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.

    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Polytron PT 1300 D
    2.136.0100
    Polytron PT 1300 D

    Polytron PT 1300 D - Metrohm version

    Homogenizer that can be controlled directly by tiamo™ or Touch Control.

    The Polytron PT 1300 D is comprised of a monitoring instrument and a drive. The coupling system on the drive permits the simple and rapid replacement of the aggregates without additional tools.
    Solid samples can be pulverized without difficulty. The instrument is however outstandingly suitable for ensuring thorough mixing in viscous samples.

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

  • 801 Stirrer with stand
    2.801.0040
    801 Stirrer with stand

    Magnetic stirrer including base plate, support rod and electrode holder for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimat and 780/781 pH meters as well as the 856 and 867 measuring modules. With permanently attached cable for MSB (Metrohm Serial Bus).

  • 803 TI Stand with stirrer and pump
    2.803.0010
    803 TI Stand with stirrer and pump

    Compact titration stand with magnetic stirrer and built-in pump for solvent addition and aspiration of the titration vessel contents. Suitable for Karl Fischer titrations with Titrandos. MSB connection.
    Including comprehensive accessories, solvent bottle and waste bottle.

  • 860 KF Thermoprep
    2.860.0010
    860 KF Thermoprep

    The 860 KF Thermoprep is designed for thermal sample preparation in Karl Fischer titration.

    Numerous substances cannot be analysed by direct Karl Fischer titration as they are not soluble, react with the Karl Fischer reagent or release their water only very slowly or not until heated to high temperatures. Using tightly sealed sample vials, the sample is inserted in the oven. The samples can be subsequently analysed by any volumetric or coulometric KF titrator.

  • 900 Touch Control
    2.900.0010
    900 Touch Control

    Operating unit for the Titrandos, USB Sample Processors, 856 Conductivity Module, 867 pH Module and 846 Dosing Interface. Touch-sensitive, high-resolution color display, simple and intuitive operation, thanks to Favorites for direct method access. With integrated Ethernet interface for direct connection to the Internet and USB interface for connecting USB printers or a USB memory stick.

    Dialog languages: German, English, Chinese, French, Spanish, Portuguese, Russian, Korean, Polish and Italian.
     

  • Remote Box MSB
    6.2148.010
    Remote Box MSB
    Additional remote interface for the connection of devices that can be controlled via remote lines. With permanently attached cable.
  • RS-232/USB box
    6.2148.020
    RS-232/USB box

    Extends the Titrando, USB Sample Processors, Dosing Interface, Titrosampler by two RS-232 interfaces for connecting e.g. balances, PC, LIMS. Requires 6.2151.030 cable.


  • Dosing Unit 2 mL
    6.3032.120
    Dosing Unit 2 mL
    Dosing unit with integrated data chip with 2 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 glass thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 5 mL
    6.3032.150
    Dosing Unit 5 mL
    Dosing unit with integrated data chip with 5 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 20 mL
    6.3032.220
    Dosing Unit 20 mL
    Dosing unit with integrated data chip with 20 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.
  • Tiamo 2.5 Light CD: 1 license
    6.6056.251
    Tiamo 2.5 Light CD: 1 license

    tiamo™ 2.5 Light computer program for controlling a titration system.

    • Up to two Metrohm instruments (Titrino, Titrando, etc.) can be connected; balances and other generic (i.e. non-Metrohm) instruments can be included without limitation
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • Data export as PDF file, CSV, SLK
    • No parallel titration
    • No data export in XML format for LIMS
    • Dialog languages: German, English, French, Italian, Spanish, Czech, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

  • Tiamo 2.5 Full CD: 1 license
    6.6056.252
    Tiamo 2.5 Full CD: 1 license

    Computer program for controlling complex titration systems.

    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • Export to LIMS, NuGenesis, Cyberlab, etc.
    • High-performance report generator
    • In compliance with the directives according to FDA 21 CFR Part 11
    • Parallel titration
    • Dialog languages: German, English, French, Italian, Spanish, Portuguese, Polish, Russian, Slovakian, Czech, Japanese, Chinese and Traditional Chinese

     

  • tiamo 2.5 Multi CD: 3 licenses
    6.6056.253
    tiamo 2.5 Multi CD: 3 licenses

    Client/server-compatible computer program for controlling complex titration systems.

    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Client/server database
    • Professional database with reevaluation
    • Export to LIMS, NuGenesis, Cyberlab, etc.
    • High-performance report generator
    • In compliance with the directives according to FDA 21 CFR Part 11
    • Parallel titration
    • Dialog languages: German, English, French, Italian, Spanish, Czech, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese and Traditional Chinese