Spectroelectrochemical Raman Instrument

Spectroelectrochemical Raman Instrument
Order number: SPELECRAMAN

Spectroelectrochemical Raman Instrument combines in only one box a LASER Class 3B (785 nm), a Bipotentiostat/Galvanostat and a spectrometer (wavelngth range 785 – 1010 nm and Raman shift 0-2850 cm-1) with a software that allows optical and electrochemical experiments synchronization.

  • Tech specs
  • Documents
  • Included parts
  • Opt. equipment
Current accuracy ≤0.5 % of current range at 100 nA to 10 mA
Current resolution 011 % of current output range
Dimensions in mm (W/H/D) 25 X 24 X 11 cm
Light Source (LS) wavelength range 785 ± 1 nm
LS Fiber optic connector FC
LS Stability ± 0.1 nm (-20 to 55 °C)
Maximum current in Ampère ±40 mA
Maximum number of channels 1
Maximum number of WE sharing AUX and REF 2
Measured current resolution 0.025 % of current range (1 pA on lowest current range)
Measured potential resolution 0.012 % of potential range
Multichannel instrument NO
Number of current ranges 8
Number of current ranges remarks ±1 nA to ±10 mA
Number of potential ranges (galvanostat) 2
Number of potential ranges remarks (galvanostat) ±100 mV to ±1 V
Operating modes Bipotentiostat; Potentiostat; Galvanostat
Optical power output 500 mW (375 mW typical)
Output power stability ± 1 %
PC interface USB
Potential accuracy ±0.2 %
Potential range in volt ±4 V
Potential resolution 1 mV
Power 5 V DC
Raman shift 0 - 2850 cm-1
Spectral line width <0.2 nm FWHM
Spectrometer (SPM) Detector 2D CDD Array, Back thinned TE Cooled
SPM A/D resolution 18 bit
SPM Dynamic range 85000 : 1
SPM Fiber optic connector SMA 905
SPM Integration time 8 ms to 60 min
SPM Optical resolution 7 – 11 cm-1
SPM Pixels 1044 x 64
SPM Signal-to-noise ratio 1000 : 1 (at full signal)
SPM Stray light < 0.08 % at 600 nm; 0.4 % at 435 nm
SPM Wavelength range 785 - 1010 nm
Weight of the instrument in kg 3.4

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • μStat 8000(P)/4000(P) one node cable connector for conventional electrodes
    CABSTAT1
    μStat 8000(P)/4000(P) one node cable connector for conventional electrodes

    Connects individual nodes of the μStat 8000(P)/4000(P) to conventional electrodes

    1 piece(s)

  • Raman Probe
    RAMANPROBE
    Raman Probe

    Reflection probe designed to be used with a single excitation 785 nm wavelength (up to 500 mW). Suitable to work with DropSens Raman Cell for Screen-Printed Electrodes or with any conventional Raman set-up.

    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • DropView SPELEC Software
    DropView SPELEC
    DropView SPELEC Software

    DropView SPELEC is a Spectroelectrochemical software that controls SPELEC instrument, offering a perfect synchronization of the optical and electrochemical measurements, as well as advanced tools for data treatment.

  • Raman Cell for Screen-Printed Electrodes
    RAMANCELL
    Raman Cell for Screen-Printed Electrodes

    Black teflon reflection cell for performing Raman Spectroelectrochemistry with screen-printed electrodes in combination with ref. RAMANPROBE.