Corrosion cell

Corrosion cell
Order number: 011RDX

This is a stationary solution corrosion cell for EIS and conventional electrochemical measurements on:
 

(a) thin metal film deposited on flat substrate

(b) metal plate

(c) metal mesh

(d) metal wire

(e) metal ribbon


The sample is installed from the bottom via magnetic (or screw) mount in between two chambers filled with electrolyte. In cases (a) and (b) bottom chamber is unused and stays dry.

The counter or/and reference electrodes are mounted in a top casing (either 2-, or 3-electrode setup). The cell elements are constructed with materials that are inert to the sample (glass and PEEK). It well fits aqueous (EPDM O-Rings) and organic solvent (FFKM O-Rings) electrolyte requirements. The construction is gas-tight and can be used when the removal and exclusion of contaminants such as oxygen and water is required by bubbling of an inert gas through the electrolyte.