Autolab Spectrophotometer UB

Autolab Spectrophotometer UB
Order number: AUT.SPECT.UB

The Autolab Spectrophotometer UB is a compact device for applications in the UV/VIS wavelenght range (from 200 nm to 720 nm). This instrument is designed to work in combination with all Autolab potentiostat/galvanostat instruments and is supported by the NOVA software. The spectrophotometer can be manually controlled or can be synchronized with electrochemical measurements. This ensures accurate timing during the measurements and allows a direct correlation between the electrochemical and spectroscopic data.

  • Tech specs
  • Documents
  • Included parts
  • Opt. equipment
A/D converter 16 bit, 2 MHz
Detector CCD linear array, 2048 pixels
Dimensions 175 mm x 110 mm x 44 mm
Fiber optic connector SMA-905
Integration time 1.05 ms - 600 s
Maximum number of scans 1013 scans of 2048 pixels
Power requirements 12 V DC / 350 mA
Resolution 1.15 nm
Sensitivity 310,000 counts/μW per ms integration time
Stray light 0.15 %
Wavelength range 200 nm - 720 nm

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Standard USB cable
    CABLE.USB
    Standard USB cable

    Standard USB cable for Autolab instruments.

    1 piece(s)

  • Spectroelectrochemistry trigger cable for DIO15 instruments
    DIO15.SPEC.TRIGGER
    Spectroelectrochemistry trigger cable for DIO15 instruments

    Triggering cable required for synchronized spectroelectrochemical measurement in combination with Autolab instruments equipped with a DIO15 interface. This cable provides a direct connection between the digital input/output (DIO) port of the Autolab and the Autolab light source and Autolab spectrophotometer. The connection to the light source enables the remote control of the shutter and the connection to the spectrophotometer provides the possibility to synchronize the acquisition of spectroscopy data with the acquisition of electrochemical data.

    1 piece(s)

  • Spectroelectrochemistry trigger cable for DIO48 instruments
    DIO48.SPEC.TRIGGER
    Spectroelectrochemistry trigger cable for DIO48 instruments

    Triggering cable required for synchronized spectroelectrochemical measurement in combination with Autolab instruments equipped with a DIO48 interface. This cable provides a direct connection between the digital input/output (DIO) port of the Autolab and the Autolab light source and Autolab spectrophotometer. The connection to the light source enables the remote control of the shutter and the connection to the spectrophotometer provides the possibility to synchronize the acquisition of spectroscopy data with the acquisition of electrochemical data.

    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Autolab 200 μm optical fiber for UV/VIS applications.
    AUT.FIBER.200.UV
    Autolab 200 μm optical fiber for UV/VIS applications.

    2 m long, 200 μm diameter optical fiber for UV/VIS applications.

  • Cuvette holder
    CUV-UV/VIS
    Cuvette holder

    The cuvette holder provides the possibility to carry out transmission measurements using a classic 10 mm glass or quartz cuvette. The holder is fitted with two SMA-905 connectors with collimating lenses built-in. A cover is provided to shield the cuvette from environmental light.