Extending the scope of IC – hyphenated techniques

Hyphenated techniques

Interfacing Metrohm ion chromatographs with sophisticated sampling systems on the one hand (PILS, MARGA, and CIC) and/or universal, highly sensitive detection systems (IC-MS, IC-ICP/MS) on the other greatly extends the scope of ion chromatography.

Another option is the combination of Metrohm IC with complementary technologies from our portfolio, such as titration and voltammetry. TitrIC and VoltIC, respectively, enable dedicated multi-parameter analysis on a single system.

Air monitoring

Air pollution is a side effect of rapid industrialization and has become a widespread phenomenon.

When combined with sophisticated sampling systems, Metrohm ion chromatographs are a highly suitable tool for comprehensive monitoring of critical pollution parameters in ambient air.

24/7 air monitoring with MARGA

MARGA (Monitor for AeRosols and Gases in Ambient air) is a dedicated solution for online monitoring of ambient air.

MARGA collects the ionic load (anions and cations) from the aerosol and the gas fraction of a defined volume of ambient air, brings it into solution, and injects it into a dual channel ion chromatograph for subsequent analysis. Learn more about MARGA here.

Particle Into Liquid Sampler (PILS)

The Particle Into Liquid Sampler, or PILS for short, transfers aerosols from a defined volume of ambient air to the aqueous phase.

PILS can be interfaced with any Metrohm ion chromatograph for multi-parameter analysis of aerosols. Learn more about this sampling system here.

Combustion Ion Chromatography

Pyrohydrolytic Combustion Ion Chromatography (CIC) extends the range of automated ion chromatography to all kinds of combustible samples.

In CIC, samples are digested by pyrohydrolysis in an oven unit. The resulting gaseous compounds are passed into an absorption solution, which is transferred to a Metrohm ion chromatograph for subsequent injection and analysis.

CIC is the preferred method to determine various halogens and sulfur in matrices ranging from solids to viscous, liquid, and gaseous samples.
  • For fully automated routine analysis.
  • Superior to offline digestion methods both regarding sample throughput and accuracy of results
  • Qualification and quantification of concentrations for each of the different halogens

CIC complies with the following official standards

Combustion IC complete system
  • ASTM D7359-08 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography, CIC)
  • UOP991-11 Chloride, Fluoride, and Bromide in Liquid Organics by Combustion Ion Chromatography (CIC)
  • ASTM D5987-96(2007) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
  • ASTM WK 24757 Work item for F, Cl, S in LPG
  • ASTM D7994-17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

Tried and tested applications for CIC

Combustion IC
  • Environmentally relevant substances (oil, plastic waste, glass, activated carbon, ...)
  • Electronic components (printed circuit boards, resin, cables, insulation, ...)
  • Fuels (gasoline, kerosene, crude oil, heating oil, coal, butane, propane, natural gas, catalysts, ...)
  • Plastics (polymers such as polyethylene, polypropylene, ...)
  • Coloring agents (pigments, paints, ...)
  • Pharmaceutical products (raw substances, intermediates, finished products, ...)
  • Foods (oils, spices, flavorings and fragrances, ...)

Combined measurements for comprehensive ion analysis

Comprehensive analysis of ionic components in water may require direct measurement, titration, ion chromatography, and voltammetry. TitrIC Vario pro combines these techniques in a single analytical system conveniently controlled by the proven Metrohm MagIC Net software.

TitrIC Vario pro – multiparameter analysis by titration and IC combined

The advantages of TitrIC Vario pro at a glance:

  • Fully automated analysis of all ionic components
  • Results for each technique combined in a single report
  • One autosampler for three analytical techniques (direct measurements, titration, and IC)
  • Compatible with Metrohm Inline Sample Preparation (MISP) techniques
  • FDA compliant

Easy to use

TitrIC Vario pro enables fully automated, unattended operation from the moment you have filled in the sample table and pressed the start button.

If any parameter is out of specification, TitrIC Vario pro sends an error message to your mobile and/or by e-mail. On your command, the system is shut down immediately.

Highly flexible

TitrIC Vario pro can be upgraded at any time with time and work saving accessories for Metrohm Inline Sample Preparation, e.g., for Inline Dilution.

You decide what you use

TitrIC Vario pro leaves you free to run just a titration and determine conductivity, use only ion chromatography, or use the system's full scope including ion chromatography.

Made to measure

Should you already use any Metrohm methods and/or instrumentation, we help you to upgrade your Metrohm IC or Titrator to a TitrIC Vario pro system.

Perfect reliability

TitrIC Vario pro automatically injects check standards after any number of samples defined by you.

If any check is out of specification, the TitrIC is automatically recalibrated.

VoltIC Professional – ion chromatography and voltammetry combined

VoltIC Professional combines ion chromatography and voltammetry in a single, powerful system for trace ion analysis.

Learn more about VoltIC Professional here.

IC/MS and IC-ICP/MS – coupling ion chromatography with mass spectrometry

IC/MS system

You can expand the scope of what ion chromatography can do by coupling it with a mass spectrometer (IC-MS) or an inductively coupled plasma mass spectrometer (IC-ICP/MS). As a result, you will benefit from an increased sensitivity and selectivity. And this will allow you to perform determinations for which maximum reliability is a must, for instance the monitoring of toxic impurities (such as haloacetic acids) in drinking water.

In addition to yielding quantitative data, these techniques also provide qualitative information on the sample.