Automated TAN/TBN analysis

Automated TAN/TBN analysis
Order Number: MATi 02

PC-controlled, fully automatic analysis system for the direct determination of TAN or TBN values in mineral oil products in series of up to 59 samples. The analysis is carried out in accordance with ASTM standards D664 and D2896. The system is noteworthy for its special resistance to the solvents used in this application. The data acquisition and the complete control of the system takes place via the proven tiamo™ titration software.
 

  • Documents
  • Included parts

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • 786 Swing Head
    2.786.0040
    786 Swing Head
    Additional equipment for Robotic Sample Processors XL without titration or transfer heads.

    1 piece(s)

  • 800 Dosino
    2.800.0010
    800 Dosino

    Drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

    2 piece(s)

  • 802 Stirrer
    2.802.0020
    802 Stirrer

    Rod stirrer for sample changer and Sample Processor.

    With 6.1909.020 Propeller stirrer 104 mm and fixed cable.

    1 piece(s)

  • 815 Robotic USB Sample Processor XL (1T/0P)
    2.815.0030
    815 Robotic USB Sample Processor XL (1T/0P)

    Robotic USB Sample Processor XL with one workstation for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to two pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected.

    Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.
     

    1 piece(s)

  • 843 Pump Station (peristaltic) - rinse/aspirate for Sample Processors
    2.843.0150
    843 Pump Station (peristaltic) - rinse/aspirate for Sample Processors
    The 843 Pump Station (peristaltic) has two built-in peristaltic pumps. These can be controlled directly from the Sample Processors via pump commands. The rinse/aspirate version is provided with all the accessories needed for automatically emptying the titration beaker and rinsing the titration equipment. The accessories are intended for use with the 814 and 815 Sample Processors.

    1 piece(s)

  • 905 Titrando
    2.905.0010
    905 Titrando

    High-end titrator for potentiometric titration with one measuring interface for use with Dosino dosing systems.
     

    • up to four dosing systems of the 800 Dosino type
    • dynamic (DET), monotonic (MET) and endpoint titration (SET)
    • Measurement with ion-selective electrodes (MEAS CONC)
    • Dosing functions with monitoring, Liquid Handling
    • four MSB connectors for additional stirrers or dosing systems
    • "iTrode" intelligent electrodes
    • USB connector
    • For use with tiamo PC software or Touch Control unit
    • Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required

    1 piece(s)

  • iSolvotrode
    6.0279.300
    iSolvotrode

    Intelligent, combined pH electrode with integrated memory chip for storing sensor data for all non-aqueous acid/base titrations.
    The glass membrane is optimized for poorly conducting solutions, and thanks to the flexible ground-joint diaphragm, the electrode is well suited for contaminated samples. This electrode can be used with non-aqueous reference electrolytes (lithium chloride or tetraethylammonium bromide). Storage in the respective reference electrolyte.
    iTrodes can be connected to Titrando, Ti-Touch, or 913/914 meters.

    1 piece(s)

  • Titration Head, 3 x SGJ 14
    6.1458.040
    Titration Head, 3 x SGJ 14
    Titration head for 120 mL beakers. With 3 openings SGJ 14 and 4 openings 6.4 mm, 2 dosing tips included. Suitable for rinsing and aspiration equipment.

    1 piece(s)

  • Sample beakers, plastic (PP), 120 mL / 250 pieces 
    6.1459.300
    Sample beakers, plastic (PP), 120 mL / 250 pieces 

    Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for sample racks 6.2041.470, 6.2041.840, 6.2041.850, 6.2068.010, 6.2068.020, 6.2068.030 and 6.9920.141, 250 pieces
     

    1 piece(s)

  • Robotic arm with holder for titration head, left swinging
    6.1462.060
    Robotic arm with holder for titration head, left swinging
    Titration head holder to 786 Swing Head

    1 piece(s)

  • Amber glass bottle / 1000 mL / GL 45
    6.1608.023
    Amber glass bottle / 1000 mL / GL 45
    For Exchange Units. Bottle for auxiliary solutions.

    1 piece(s)

  • Eluent bottle / 2 L / GL 45
    6.1608.070
    Eluent bottle / 2 L / GL 45

    1 piece(s)

  • FEP tubing / M6 / 150 cm
    6.1805.030
    FEP tubing / M6 / 150 cm
    With light and kink protection

    2 piece(s)

  • Viton pump tubing
    6.1826.160
    Viton pump tubing

    For peristaltic pumps.

    1 piece(s)

  • Propeller for 120 mL beaker (6.1459.300)
    6.1909.050
    Propeller for 120 mL beaker (6.1459.300)
    Propeller for 802 Stirrer when this is used with sample racks for 120 mL beakers (6.1459.300)

    1 piece(s)

  • Sample rack 59 x 120 mL, PP
    6.2041.850
    Sample rack 59 x 120 mL, PP
    Sample rack for 59x120 mL samples (6.1459.300), multi-row

    1 piece(s)

  • Cable USB A – mini-DIN 8-pin
    6.2151.000
    Cable USB A – mini-DIN 8-pin
    Controller cable

    1 piece(s)

  • TEABr 0.4 mol/L in ethylene glycol (250 mL)
    6.2320.000
    TEABr 0.4 mol/L in ethylene glycol (250 mL)
    Electrolyte solution TEABr (tetraethylammonium bromide in ethylene glycol), c(TEABr) = 0.4 mol/L

    1 piece(s)

  • Drip pan for 789/815/855
    6.2711.070
    Drip pan for 789/815/855
    Drip pan for 789, 815, 855 Robotic Sample Processors XL

    1 piece(s)

  • Dosing Unit 10 mL
    6.3032.210
    Dosing Unit 10 mL
    Dosing unit with integrated data chip with 10 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Dosing Unit 50 mL
    6.3032.250
    Dosing Unit 50 mL
    Dosing unit with integrated data chip with 50 mL glass cylinder and light protection, mountable on reagent bottle with ISO/DIN GL45 thread. FEP tubing connection, anti-diffusion buret tip.

    1 piece(s)

  • Tiamo 2.5 Light CD: 1 license
    6.6056.251
    Tiamo 2.5 Light CD: 1 license

    tiamo™ 2.5 Light computer program for controlling a titration system.

    • Up to two Metrohm instruments (Titrino, Titrando, etc.) can be connected; balances and other generic (i.e. non-Metrohm) instruments can be included without limitation
    • Graphical method editor with numerous templates
    • Layout manager for individual monitor interface
    • Professional database with reevaluation
    • High-performance report generator
    • Data export as PDF file, CSV, SLK
    • No parallel titration
    • No data export in XML format for LIMS
    • Dialog languages: German, English, French, Italian, Spanish, Czech, Portuguese, Polish, Russian, Slovakian, Japanese, Chinese, Traditional Chinese

     

    1 piece(s)