Supplementary equipment for electrochemistry

Optical bench with potentiostat/galvanostat

In electrochemical research, the flexibility to set up and perform experiments as you need is crucial.

Metrohm Autolab offers a range of supplementary products to expand the scope of your electrochemical research.

These products will enable you to implement different measurement techniques, expand the measurable range, and conduct specific applications.

Products

  • Optical Bench for photovoltaic applications
  • Faraday cage for interference protection
  • Rotating disk (RDE) and rotating ring disk (RRDE) electrodes
  • Autolab RHD Microcell HC for temperature control
  • VA stand for voltammetry and polarography
  •  
  • Electronic Load Interfaces for high- voltage and high-power applications
  •  
  • Cells for corrosion applications
  •  

Optical Bench for studying photovoltaic cells

Optical Bench
The Autolab Optical Bench is a system that enables you to study photovoltaic cells, such as dye-sensitized solar cells.

This system includes a highly focused LED light source and a software-programmable LED driver for light source output control. In addition, you will receive a full set of accessories including various LED covers for different wavelengths.

> Autolab Optical Bench

Rotating disk and rotating ring disk electrodes

Rotating disk electrode

The Autolab rotating disk (RDE) and rotating ring disk (RRDE) electrodes are high-precision and low-friction rotators which can be used to create and control convective mass transport in an electrochemical cell. The rotation rate can be controlled either manually or directly through the software.

The mercury contacts used in these rotators ensure that the electrical contact to the electrodes remains noise-free at any rotation rate.

> Autolab RDE

> Autolab RRDE

Fast and accurate temperature control

The Autolab RHD Microcell HC is the ideal solution for fast and reliable temperature-controlled experiments. Consisting of a temperature controller and a cell stage with Peltier element, the Autolab RHD Microcell HC is designed to accommodate a large choice of specially designed electrochemical cells. The temperature can be controlled either manually or through the NOVA software.

The electrochemical cells designed for the Autolab RHD Microcell HC system suit all experimental requirements. This combination allows you to perform electrochemical measurements using all the available electrochemical techniques in order to determine relevant parameters like impedance and conductivity over a wide range of temperatures.

> Autolab RHD Microcell HC

Metrohm 663 VA Stand

Metrohm 663 VA Stand
Used together with a Metrohm Autolab potentiostat, this measuring stand enables polarographic and voltammetric measurements.

The Multi-mode electrode pro that is fitted to the system can be operated in various modes: Dropping Mercury Electrode (DME), Hanging Mercury Drop Electrode (HMDE), and Static Mercury Drop Electrode (SMDE).

> Metrohm 663 VA Stand

> Click here to browse all electrodes for Metrohm Autolab instruments

Products for third-party instrument

In order to enable even more flexibility in electrochemical experiments, Metrohm Autolab offers interfaces to control third-party devices.

Electronic Load Interface
Electronic Load Interface: This generic interface can be used to control electronic loads or power supplies in experiments involving measurements at very high power (Keysight and TDI).
The Metrohm Autolab Electronic Load Interface is compatible with the products of the following companies:

Voltage Multiplier

Voltage Multiplier: When used with the differential amplifier of the Metrohm Autolab potentiostat/galvanostat, this extension allows you to expand the measurable voltage range to up to 100 V.

The Voltage Multiplier extension can be used for electrochemical measurements on battery and fuel cell stacks.

> Electronic Load Interface

> Voltage Multiplier

Cells for corrosion research and analysis

Corrosion cell

Metrohm Autolab potentiostat/galvanostat instruments are ideally suited for electrochemical research into the corrosion properties of metals. For this type of application, a cell for the metal sample and the electrolyte is required.

We offer a selection of cells for corrosion research:

  • Corrosion cells, available in two sizes (400 mL and 1 L) for circular samples.
  • Flat cell designed for large, flat samples (coated or bare metal).
> Corrosion cells

Faraday cage

Faraday cage

Protect your electrochemical setup against electromagnetic interference from external sources (e.g., computer monitors, other instruments, or power lines) with the Metrohm Autolab Faraday cage.

> Faraday cage

Electrodes for electrochemistry


Find electrodes and electrode accessories for your Metrohm Autolab potentiostat/ galvanostat.

Learn more …