Autolab D/HAL Light Source

Autolab D/HAL Light Source
Order Number: AUT.LIGHT.DHc

The Autolab D/HAL Light Source is a compact deuterium/halogen light source. It provides a good light output between 200 and 2500 nm for nearly all absorbance chemistry applications. The light source is equipped with a software-controlled shutter enable or disable light output.

  • Tech specs
  • Documents
  • Included parts
  • Options
Dimensions 175 mm x 110 mm x 44 mm
Drift < 0.25 %/h
Fiber optic connector SMA-905
Lamp lifetime 2000 hours
Optical power up to 7 μW with 600 μm fiber
Power requirements 12 V / 1.0 A
Stability < 1 mAU/h
Temperature range 5 °C - 35 °C
Warm-up time 8 minutes
Wavelength range 200 nm to 400 nm and 400 nm to 2500 nm

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Power supply for Autolab D/HAL light source compact
    AUT.PS12V1A
    Power supply for Autolab D/HAL light source compact

    12 V, 1 A DC power supply for the Autolab deuterium/halogen compact light source.

    1 piece(s)

Download the complete Scope of Delivery and Optional Accessories for as PDF:

  • Autolab 200 μm optical fiber for UV/VIS applications.
    AUT.FIBER.200.UV
    Autolab 200 μm optical fiber for UV/VIS applications.

    2 m long, 200 μm diameter optical fiber for UV/VIS applications.

  • Autolab 200 μm optical fiber for UV/VIS/NIR applications.
    AUT.FIBER.200.UVIR
    Autolab 200 μm optical fiber for UV/VIS/NIR applications.

    The Autolab spectrophotometer and light source are designed to connect to the electrochemical cell or cuvette holder using optical fibers. The standard dimensions of the optical fibers is 2 m in length and 200 μm in diameter. The fibers are fitted with SMA-905 connectors on both ends.

  • Cuvette holder
    CUV-UV/VIS
    Cuvette holder

    The cuvette holder provides the possibility to carry out transmission measurements using a classic 10 mm glass or quartz cuvette. The holder is fitted with two SMA-905 connectors with collimating lenses built-in. A cover is provided to shield the cuvette from environmental light.

  • Spectroelectrochemistry trigger cable for DIO15 instruments
    DIO15.SPEC.TRIGGER
    Spectroelectrochemistry trigger cable for DIO15 instruments

    Triggering cable required for synchronized spectroelectrochemical measurement in combination with Autolab instruments equipped with a DIO15 interface. This cable provides a direct connection between the digital input/output (DIO) port of the Autolab and the Autolab light source and Autolab spectrophotometer. The connection to the light source enables the remote control of the shutter and the connection to the spectrophotometer provides the possibility to synchronize the acquisition of spectroscopy data with the acquisition of electrochemical data.

  • Spectroelectrochemistry trigger cable for DIO48 instruments
    DIO48.SPEC.TRIGGER
    Spectroelectrochemistry trigger cable for DIO48 instruments

    Triggering cable required for synchronized spectroelectrochemical measurement in combination with Autolab instruments equipped with a DIO48 interface. This cable provides a direct connection between the digital input/output (DIO) port of the Autolab and the Autolab light source and Autolab spectrophotometer. The connection to the light source enables the remote control of the shutter and the connection to the spectrophotometer provides the possibility to synchronize the acquisition of spectroscopy data with the acquisition of electrochemical data.